Hi you all, got a question. I use a Braille Blazer embosser with my BN to
do some embossing, and am running into a problem with it.
The last two embossing jobs I did, there was no margin at the top of the
page, the dotsw were just a bit off the tear off strip, but not by much and
of course this makes it really hard to read.
Also, I want to set a margin along the left side of the page so I can punch
wholes and put the finished Braille in a binder.
It is for personal use, so don't need perfection, but right now I have an
enormous right margin and nothing for a left, the length is 32 cells, and
the page length is 25, there appears to be room at the bottom of the page.
Anyway, not sure if to make the changes with the Blazer, or with the BN. I
have a QT by the by if this has anything to do with it.
Thanks for any help, smile.
Shelley L. Rhodes and Judson, guiding golden
[EMAIL PROTECTED]
Guide Dogs For the Blind Inc.
Graduate Advisory Council
www.guidedogs.com
The vision must be followed by the venture. It is not enough to
stare up the steps - we must step up the stairs.
-- Vance Havner
