Hi All, As the subject line says, I'm having a problem doing a couple of things on the PK; however, these could just be due to my inexperience with Keysoft. Or, on the other hand, if these have already been reported as bugs and I missed it, then I apologize in advance for my error.
First, I can't seem to get the PK to come up in the alternative startup modes--meaning starting up with just Braille or just speech. Now, things are just fine if I have already changed to one of these modes before shutting off the PK; but, rather, it's the changing startup mode at turn on that I'm talking about--for example, starting up with Braille only after using both speech and Braille. When I press the dot 3 with the power on, the unit comes up with both Braille and speech, and does the same if I press the dot two with power on. And, second, although I can set an appointment, and even get the alarm to go off, I'm not able to go in and review/change the details of that appointment. I can't even seem to get the PK to tell me that I've got an appointment scheduled for that matter. However, when the alarm does go off, I can go to the alarm menu and get the details of the appointment read to me, but they disappear if I try to open the planner and find them there, or don't even show up in the planner at all if I check there before the alarm goes off. Oh, I did all three types of resets, and I still have the problems. And, strangely enough, at least to me, anyway, after the 4 5 6 reset, I wasn't prompted for the date and time. They actually were still set correctly, although my time zone had to be changed in the utilities menu. And, most of my wireless and GPRS and dial-up connection settings were still in tact. I haven't started storing files on the PK yet, so wasn't able to check that after the resets. Any info/suggestions would be appreciated. Thanks.
