On Wed, 27 Feb 2008 19:07:37 +0000 George - <[EMAIL PROTECTED]> wrote:
> > Hallo. > I am trying to establish a bridge on my debian linux box between an ethernet > and a wireless interface, in order to be able to connect to the bridge via my > laptop's wireless. My laptop has WinXP. > > Well, i have a bridge which i created by > > brctl addbr br0 > brctl addif eth1 (Ethernet controller: Intel Corporation 82562ET/EZ/GT/GZ - > PRO/100 VE (LOM) Ethernet Controller (rev 03)) > brctl addif eth4 (Network controller: RaLink RT2500 802.11g Cardbus/mini-PCI > (rev 01)) > > I am connected through eth1 to a router and I want to bridge this two > connections in order to connect remotely from my laptop's wireless card which > is an Intel(R) Wireless WiFi Link 4965 AGN. > My last steps are to > > dhclient br0 > echo "0"> /proc/sys/net/ipv4/ip_forward > iptables -P FORWARD ACCEPT > > I was able to connect from my laptop, and router's dhcp worked fine. But here > my problems start. I tried to ping my linux box and i was successful. I > captured arp, dhcp packets. But when I am trying to ping my router (from my > laptop), I fail. I try to catch packets with tcpdump -i br0 -vvvv|grep > laptop_ip but it seems as if packets never get to my linux box. I found out > about some kind of shapping so i also tried the following > > for f in `ls /proc/sys/net/bridge/`; do echo "0"> /proc/sys/net/bridge/$f > ;cat /proc/sys/net/bridge/$f;done > > but no good. My linux box can access Internet with no problem. My cards are > ok, since the same configuration with a WinXP box (instead of debian) works. > Are there any ideas? > > Giwrgos > _________________________________________________________________ > Express yourself instantly with MSN Messenger! Download today it's FREE! > http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/ > _______________________________________________ > Bridge mailing list > Bridge@lists.linux-foundation.org > https://lists.linux-foundation.org/mailman/listinfo/bridge Forget the /proc futzing that isn't your problem. http://www.linux-foundation.org/en/Net:Bridge#FAQ The problem is that wireless is not the same as Ethernet as far as bridging. _______________________________________________ Bridge mailing list Bridge@lists.linux-foundation.org https://lists.linux-foundation.org/mailman/listinfo/bridge