On Mon, 21 Jun 2004 10:06:32 -0700 (PDT) hell know <[EMAIL PROTECTED]> wrote:
> Greetings all. > > I need a transparent way of selectively controlling packet flow between two network > devices such that for example I can "see" [e.g. tcpdump] a packet coming into eth0, > queue it, and then manually release it out eth1, one packet at a time. See diagram > below. (Reason for doing this is to watch the behavior of the device under test to > certain packets but I cannot control the speed of the packets from the traffic > source so I need an intermediary to do that). > > [PC/traffic initiator] -- [bridge] -- [device under test] > > I've looked at nistnet, but that would only work for IP packets, and requires you to > use it as a router as I understand it, which wouldn't work here. I've also looked > at IET which seemed to be what I need, but unless I'm doing something wrong it > crashes very badly under RHAT 9.0 and SuSE 9.0. > > Is there any simple way to write a 'hook' into bridge-utils or the kernel to do > this? Are there any other utilities anyone can point me to? > > Any help would be greatly appreciated! Thanks in advance!!! Two ways I have used are using netfilter bridge tables (ebtables) to label or control what goes through. You could route it out to your application then re-inject it. Of course if your doing only that you probably want to use something like tun or tap . If you want to do things that change packet speed, you need to look at the QoS scheduling methods for devices.
_______________________________________________ Bridge mailing list [EMAIL PROTECTED] http://lists.osdl.org/mailman/listinfo/bridge
