Hello world.
I'm new to this list so bare with me.
I have a procurve 2424m with 3 vlans configured.
I get the internet from another procurve that is connected to vlan1, and the bridge is connected between vlan1 and vlan2 (doing some filtering here)
So, internet > vlan1 > bridge > vlan2
The problem is that I get a packet loss between 30% and 70% and the logs on the bridge looks okay, same with the logs on the procurve.
The bridge works like a charm if I use another switch instead of vlan1. like this: Internet > another switch > bridge > vlan2 Internet > vlan1 > bridge > another switch gives the same positive result.
The bridge is actually configured to serve as both a bridge between 2 vlans and as a NAT-box for another vlan with workstations, dont think that is relevant to this problem though.
I used to use a router between those 2 vlans to filter, that also worked.
Any clues on where to even start looking? It might be a problem with the switch, but I might as well ask here.
Oh, and the vlans are all untagged, and there is no stp running on the switch.
Cheers, Fredrik Laestadius. .se _______________________________________________ Bridge mailing list [EMAIL PROTECTED] http://lists.osdl.org/mailman/listinfo/bridge
