Hello all,
First thanks to all for helping me. I have an issue to bring up bridging isis packets using BRCTL.
As i am quite a newbie, maybe this is not possible or maybe I forget to load modules so that the bridging I am trying to put in place work properly.
Here is the configuration I used:
I1 ------ eth1 (physical interface of my linux machine) ----------- BRIDGE ----------- n1-eth0 (tuntap interface) ---- I2
Where I1 and I2 are two ISIS processes.
On both eth1 and n1-eth0, there are ISIS packets send by I1 and I2 processes.
With an analyzer (ethereal), I can see ISIS packets sent by ISIS process (I1) on eth1 but no ISIS packet from I2 (and vice versa).
However, if I make a capture on the BRIDGE, I have ISIS packets from both ISIS processes (I1 and I2).
Bridge configuration:
-bridge-utils-1.0.4
-linux kernel: 2.6
Anyone can help me ?
Thank you
Sovatha
_______________________________________________ Bridge mailing list [email protected] http://lists.osdl.org/mailman/listinfo/bridge
