Hi,
I've some problems with this network :
[ host1 eth0: 10.22.2.4/8 ] [ host2 eth0:10.22.2.5/8 default route host3]
\ /
SWITCH internet
|
|
|
|
[ host3 eth0-eth1: 10.22.2.3/8 -- eth2:
8X.242.21.225/8 ]
|
|
[ host4 eth0:10.22.2.2/8 default route
host3]
On host3 I use this rule to translate addresses of packets going through eth2
to the internet:
# iptables -t nat -A POSTROUTING -o eth2 -j MASQUERADE
If host1 default route is set to host2, no problem but when host4 is used as
default route, see:
host1# route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
10.0.0.0 * 255.0.0.0 U 0 0
0 eth0
default 10.22.2.2 0.0.0.0 UG 0 0 0
eth0
host1# ping 195.101.94.80
PING 195.101.94.80 (195.101.94.80): 56 data bytes
92 bytes from 10.22.2.2 (10.22.2.2): Redirect Host(New addr: 10.22.2.3)
Vr HL TOS Len ID Flg off TTL Pro cks Src Dst
4 5 00 0054 0777 0 0000 3f 01 4662 10.22.2.4 195.101.94.80
--- janus-2-20.x-echo.com ping statistics ---
2 packets transmitted, 0 packets received, 100% packet loss
iptables -t filter -A FORWARD -p icmp -j LOG --log-ip-options --log-prefix
--FILTER-FORWARD--
iptables -t filter -A PREROUTING -p icmp -j LOG --log-ip-options --log-prefix
--NAT-PREROUTING--
iptables -t filter -A POSTROUTING -p icmp -j LOG --log-ip-options --log-prefix
--NAT-POSTROUTING--
Oct 25 00:19:42 host3 --NAT-PREROUTING--IN=bridge OUT= PHYSIN=eth0
MAC=00:e0:4c:ff:02:5e:00:0a:95:f5:1b:fc:08:00 SRC=10.22.2.4 DST=212.27.33.225
LEN=84 TOS=0x00 PREC=0x00 TTL=64 ID=2197 PROTO=ICMP TYPE=8 CODE=0 ID=233 SEQ=0
Oct 25 00:19:42 host3 --FILTER-FORWARD--IN=bridge OUT=bridge PHYSIN=eth0
PHYSOUT=eth1 SRC=10.22.2.4 DST=212.27.33.225 LEN=84 TOS=0x00 PREC=0x00 TTL=64
ID=2197 PROTO=ICMP TYPE=8 CODE=0 ID=233 SEQ=0
Oct 25 00:19:42 host3 --NAT-POSTROUTING--IN= OUT=bridge PHYSIN=eth0
PHYSOUT=eth1 SRC=10.22.2.4 DST=212.27.33.225 LEN=84 TOS=0x00 PREC=0x00 TTL=64
ID=2197 PROTO=ICMP TYPE=8 CODE=0 ID=233 SEQ=0
Oct 25 00:19:42 host3 --FILTER-FORWARD--IN=bridge OUT=eth2 PHYSIN=eth1
SRC=10.22.2.4 DST=212.27.33.225 LEN=84 TOS=0x00 PREC=0x00 TTL=62 ID=2197
PROTO=ICMP TYPE=8 CODE=0 ID=233 SEQ=0
Oct 25 00:19:43 host3 --FILTER-FORWARD--IN=bridge OUT=bridge PHYSIN=eth0
PHYSOUT=eth1 SRC=10.22.2.4 DST=212.27.33.225 LEN=84 TOS=0x00 PREC=0x00 TTL=64
ID=2199 PROTO=ICMP TYPE=8 CODE=0 ID=233 SEQ=1
As you can see packets doesnt pass through POSTROUTING when routed to internet.
I think that's the problem. But why do they pass through it when host2 is the
default route and not when it is host4 ?
ohoh, weird, I launched "tcpdump -i bridge icmp" to see what's happening and it
is working when tcpdump is listening !
If I kill tcpdump it stops working...
Oct 25 00:46:14 host3 --NAT-PREROUTING--IN=bridge OUT= PHYSIN=eth0
MAC=00:50:22:b1:0d:19:00:50:22:b0:90:98:08:00 SRC=10.22.2.4 DST=152.2.210.81
LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=1882 PROTO=ICMP TYPE=8 CODE=0 ID=231 SEQ=0
Oct 25 00:46:14 host3 --FILTER-FORWARD--IN=bridge OUT=eth2 PHYSIN=eth0
SRC=10.22.2.4 DST=152.2.210.81 LEN=84 TOS=0x00 PREC=0x00 TTL=62 ID=1882
PROTO=ICMP TYPE=8 CODE=0 ID=231 SEQ=0
Oct 25 00:46:14 host3 --NAT-POSTROUTING--IN= OUT=eth2 PHYSIN=eth0 SRC=10.22.2.4
DST=152.2.210.81 LEN=84 TOS=0x00 PREC=0x00 TTL=62 ID=1882 PROTO=ICMP TYPE=8
CODE=0 ID=231 SEQ=0
Oct 25 00:46:14 host3 --FILTER-FORWARD--IN=eth2 OUT=bridge PHYSOUT=eth0
SRC=152.2.210.81 DST=10.22.2.4 LEN=84 TOS=0x00 PREC=0x00 TTL=45 ID=54251
PROTO=ICMP TYPE=0 CODE=0 ID=231 SEQ=0
Oct 25 00:46:15 host3 --NAT-PREROUTING--IN=bridge OUT= PHYSIN=eth0
MAC=00:50:22:b1:0d:19:00:0a:95:f5:1b:fc:08:00 SRC=10.22.2.4 DST=152.2.210.81
LEN=84 TOS=0x00 PREC=0x00 TTL=64 ID=1886 PROTO=ICMP TYPE=8 CODE=0 ID=231 SEQ=1
Oct 25 00:46:15 host3 --FILTER-FORWARD--IN=bridge OUT=eth2 PHYSIN=eth0
SRC=10.22.2.4 DST=152.2.210.81 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=1886
PROTO=ICMP TYPE=8 CODE=0 ID=231 SEQ=1
Oct 25 00:46:15 host3 --NAT-POSTROUTING--IN= OUT=eth2 PHYSIN=eth0 SRC=10.22.2.4
DST=152.2.210.81 LEN=84 TOS=0x00 PREC=0x00 TTL=63 ID=1886 PROTO=ICMP TYPE=8
CODE=0 ID=231 SEQ=1
Oct 25 00:46:15 host3 --FILTER-FORWARD--IN=eth2 OUT=bridge PHYSOUT=eth0
SRC=152.2.210.81 DST=10.22.2.4 LEN=84 TOS=0x00 PREC=0x00 TTL=45 ID=54252
PROTO=ICMP TYPE=0 CODE=0 ID=231 SEQ=1
Do you have any idea ? Do you need more informations ?
Thanks in advance.
- Michel
_______________________________________________
Bridge mailing list
[email protected]
https://lists.osdl.org/mailman/listinfo/bridge
