Sorry for not getting back to the list quicker on this. It appeared to me that mged or some other program it ran was trying to die "gracefully" and printed the illegal instruction message to stderr. So I assumed I had configured the build wrong. Also I did a little testing to see what things would generate the illegal instruction message, and it seemed anything with a curved surface more complex than a sphere or cone would do it when it was displayed.
Thanks for the detective work Simon, I was going to try running this in a debugger to see if could squeeze out some more info but I didn't have any time to do that this weekend. As soon as my current backup run is over this morning, I'll try to build it without the SSE check. I, of course, have no idea what that means, but I'll try it anyway. It seems from the back trace on the crash logs I did get, that the error is related to nanosleep, so I get the feeling you're on the right track. I'll put the results back on the mailing list post haste. Thanks, Garrett ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ BRL-CAD Users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/brlcad-users
