On Fri, Nov 02, 2007 at 01:15:41PM -0700, Don Raikes wrote: > Hi all, Does anyone have any reccommendations on how to clean a braille > display? I have an alva satellite 540, and I have one dot that won't popup > and many dots that are a bit sticky on the going down part.
There is a good discussion of this topic in the archives of this mailing list. If you search the archives you should find it there. Probably the only solution at this point is to have it cleaned by an expert who is trained in handling piezoelectric cells and who knows how to clean them safely. Apparently there is a build-up of static electricity in there which can cause serious damage to the display if not handled carefully. Dust and grease tend to accumulate under the cell caps, which have to be removed, the pins then need to be taken out individually and cleaned, while taking care of the delicate piezoelectric reeds to which they are attached. These are made of a ceramic material which bends when 200V of electricity are applied, and that's what raises and lowers each pin. _______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: BRLTTY@mielke.cc For general information, go to: http://mielke.cc/mailman/listinfo/brltty
