Samuel Thibault ha scritto: > Grr indeed... > > Could you try the -5 version I've just uploaded? >
ok tried, but nothing again. I try to give you some other I hope usefull feedback. If I load brltty as follows: brltty -b bl -d serial:COM1 or brltty -b lb -B Driver=braillelite -d serial:COM1 in both cases the prompt is not shown until I press one time enter key. The difference between the two calls is that braillelite never starts with bl command. With lb after a long long time it starts, on the screen appears libbraille loaded and then as told before. When I get the prompt by pressing enter, brltty with lb read only the prompt line and what I digit and for example, if I provide a dir command, I can read only: "3 dir and 4 bytes"...very very strange bihaviour. The last thing is that when I try to close the cmd console window, using lb driver I get this error: brltty.exe - Errore di applicazione L'istruzione a "0x10001569" ha fatto riferimento alla memoria a "0x00df0710". La memoria non poteva essere "written". Fare clic su OK per terminare l'applicazione OK (application error. the call at adres....pointed at....the memory could not be written) byebye Gianluca _______________________________________________ This message was sent via the BRLTTY mailing list. To post a message, send an e-mail to: [email protected] For general information, go to: http://mielke.cc/mailman/listinfo/brltty
