Hello,
If you do the command
brltty –V
is the papenmeir Braille display driver listed in the output? If it is listed
then BrlTTY has the driver compiled in and so it should work.
Are you sure the Papenmeir is being detected by the libusb driver, go to device
manager to check this, it would be listed in the libusb device category if it
is.
Did you install the libusb win32 filter when Installing BrlTTY?
Sorry if you mentioned this sort of stuff in a previous message, I haven’t had
the time to read through all list messages recently so may have missed the one
where you gave the answers before.
Michael Whapples
From: Anders Holmberg
Sent: Saturday, March 03, 2012 10:45 PM
To: Michael Whapples
Subject: Re: [BRLTTY] More strange issues with brltty for windows.
Hi!
Yes its really strange.
Not sure what makes it do like that.
/A
Michael Whapples skrev 2012-03-03 20:48:
This sounds a bit strange, I just had a quick look in the BrlTTY
configuration tool on my Windows system and the PM Braille display driver is
shown. I cannot confirm whether the PM driver works or not as I don’t have such
a Braille display.
I cannot quite remember which version of BrlTTY I am using, but its one of
the 4.3 builds.
Michael Whapples
From: Anders Holmberg
Sent: Friday, March 02, 2012 5:53 PM
To: [email protected] ; Informal discussion between users and developers
of BRLTTY.
Subject: Re: [BRLTTY] More strange issues with brltty for windows.
Hi!
A note to my last post.
It seems that the papenmeier display driver is disabled when loading brltty
manually.
I restarted my computer now and found the brltty service was starting.
So i tried configuring brltty but the pm didn't show up in the configurator.
I don't think the -d parameter will work either but of course i can try it.
/A
Anders Holmberg skrev 2012-03-02 18:39:
Hi!
I really need to get the brltty to work here as i prefer braille under
windows.
Now i have had problems with the latest version of brltty with the libusb
wich not seem to recognize my braille display.
So i decided to try out older versions to see if they work properly.
Ok so i installed version 4.3.2 and when i did that i had to restart my
computer.
now the brltty service not even load automatically but i can start it by
hand.
No display detected though.
I really hoep papenmeier comes with a driver for nvda very soon.
/A
_______________________________________________
This message was sent via the BRLTTY mailing list.
To post a message, send an e-mail to: [email protected]
For general information, go to: http://mielke.cc/mailman/listinfo/brltty_______________________________________________
This message was sent via the BRLTTY mailing list.
To post a message, send an e-mail to: [email protected]
For general information, go to: http://mielke.cc/mailman/listinfo/brltty
