OK, what i have to do to get in 1 GB output und df -h. I test with 1026MB (1.1 GB), 1018MB (1018MB), 996MB (996MB). Why i can´t get an output of 1.0GB with these MB?
sh-2.05b# df -h Filesystem Size Used Avail Use% Mounted on /dev/hda3 1004M 472M 523M 48% / sh-2.05b# df -h Filesystem Size Used Avail Use% Mounted on /dev/hda3 996M 472M 515M 48% / sh-2.05b# df -h Filesystem Size Used Avail Use% Mounted on /dev/hda3 1018M 472M 536M 47% / ########## Here are some more tests with the goal to make 1.0 GB Partition server:/# clear server:/# df -h Dateisystem Größe Benut Verf Ben% Eingehängt auf /dev/hda3 1018M 472M 536M 47% / tmpfs 504M 0 504M 0% /dev/shm /dev/hda1 54M 8,0M 45M 16% /boot /dev/hda5 958M 17M 893M 2% /mnt/1 /dev/hda6 1,1G 33M 943M 4% /mnt/2 /dev/hda7 942M 17M 879M 2% /mnt/3 /dev/hda8 1,1G 33M 958M 4% /mnt/4 /dev/hda9 912M 17M 849M 2% /mnt/5 /dev/hda10 857M 17M 798M 2% /mnt/6 server:/# df -m Dateisystem 1M-Blöcke Benutzt Verfügbar Ben% Eingehängt auf /dev/hda3 1018 472 536 47% / tmpfs 504 0 504 0% /dev/shm /dev/hda1 54 8 45 16% /boot /dev/hda5 958 17 893 2% /mnt/1 /dev/hda6 1027 33 943 4% /mnt/2 /dev/hda7 942 17 879 2% /mnt/3 /dev/hda8 1043 33 958 4% /mnt/4 /dev/hda9 912 17 849 2% /mnt/5 /dev/hda10 857 17 798 2% /mnt/6 server:/# df -H Dateisystem Größe Benut Verf Ben% Eingehängt auf /dev/hda3 1,1G 495M 562M 47% / tmpfs 529M 0 529M 0% /dev/shm /dev/hda1 56M 8,4M 47M 16% /boot /dev/hda5 1,1G 17M 937M 2% /mnt/1 /dev/hda6 1,1G 34M 989M 4% /mnt/2 /dev/hda7 988M 17M 921M 2% /mnt/3 /dev/hda8 1,1G 34M 1,1G 4% /mnt/4 /dev/hda9 956M 17M 890M 2% /mnt/5 /dev/hda10 899M 17M 837M 2% /mnt/6 server:/# df Dateisystem 1K-Blöcke Benutzt Verfügbar Ben% Eingehängt auf /dev/hda3 1041744 482824 548320 47% / tmpfs 515716 0 515716 0% /dev/shm /dev/hda1 54416 8175 45680 16% /boot /dev/hda5 980308 16428 914084 2% /mnt/1 /dev/hda6 1051472 32828 965232 4% /mnt/2 /dev/hda7 964500 16428 899076 2% /mnt/3 /dev/hda8 1067288 32828 980244 4% /mnt/4 /dev/hda9 932880 16428 869064 2% /mnt/5 /dev/hda10 877544 16428 816540 2% /mnt/6 -----Ursprüngliche Nachricht----- Von: Paul Eggert [mailto:[EMAIL PROTECTED] Gesendet: Freitag, 2. September 2005 21:03 An: Matzwelt.info Cc: bug-coreutils@gnu.org Betreff: Re: df: Wrong Gigabyte-Output "Matzwelt.info" <[EMAIL PROTECTED]> writes: > ich saw this Problem after Dist-Upgrade (aptitude) from Debian 3.0 (woody) > to Debian 3.1 (sarge). 3304 MB must be output 3,2(265625) GB on df -h. I don't see a bug here. As I understand it, you had 3,463,516,160 bytes on your partition, which is about 3303.07 MiB (one MiB == 2**20 bytes). df always rounds up (POSIX requires this) so it rounds up the total to 3304 MiB-blocks. That same total is also equal to about 3.23 GiB (one GiB == 2**30 bytes), so df -h's "3,3G" is also correctly rounded up. Also, df -H's "3,5G" is also correctly rounded up, since the actual value is about 3.46 GB. Does this explain what you observed? If not, please clarify. Thanks. _______________________________________________ Bug-coreutils mailing list Bug-coreutils@gnu.org http://lists.gnu.org/mailman/listinfo/bug-coreutils
