Dear Sir or Madam,
After many research I found your great tool on your site and spend =
several days on trying to recover my damaged external Western Digital =
hard drive. That being said, it seems like it is taking eternity for it =
complete therefore I hope if you could help me. I have stopped the =
process and restarted the PC but speed is still extremely slow.
GNU ddrescue 1.18.1
About to copy an unknown number of bytes from /dev/disk3s3 to =
/Users/kevin/Desktop/Rescue.dmg
Starting positions: infile =3D 0 B, outfile =3D 0 B
Copy block size: 4096 sectors Initial skip size: 128 sectors
Sector size: 512 Bytes
Press Ctrl-C to interrupt
Initial status (read from logfile)
rescued: 8716 MB, errsize: 6676 MB, errors: 2056
Current status
rescued: 9177 MB, errsize: 7092 MB, current rate: 0 B/s
ipos: 77938 MB, errors: 2142, average rate: 118 kB/s
opos: 77938 MB, run time: 1.07 h, successful read: 38 s =
ago
Copying non-tried blocks... Pass 1 (forwards)
Even with the incomplete the Rescue.dmg file I tried to use the below =
command to recover the files:
kevin$ sudo /opt/local/bin/ddrescue --force -v -c 4096 =
/Users/kevin/Desktop/Rescue.dmg /dev/rdisk4s2 =
/Users/kevin/Desktop/MPA/recovery.log
But without any luck. Any help you could provide is greatly appreciated.
Thank you and best regards,
Kevin
_______________________________________________
Bug-ddrescue mailing list
[email protected]
https://lists.gnu.org/mailman/listinfo/bug-ddrescue
