Jean-Philippe BATTU <[EMAIL PROTECTED]> [2002-09-04 15:41:49 +0200]: > I used a scsi tape driver (/dev/st2) on a red hat 7.2 system ia64. > when I rewind first the tape, it is ok. > > when I write a long file on the tape (dump 0f /dev/st2 /dev/sda3), > dump seems to be ok, but the next rewind operation ( mt rewind ) > gives an error message : > /dev/st2: Input/output error > and , in the /var/log/messages, I get : > kernel: st2: Error 26030000 (sugg. bt 0x20, driver bt 0x6, host bt 0x3).
I can't imagine what could be the problem there. But the fileutils bug list is probably not the place to get information on your problem since you are not using any of the fileutils. Sorry, wrong list. I suggest one of the news groups such as comp.os.linux.misc might be better since you have not figured out what the problem is yet. That is the best I can suggest. Good Luck Bob > but when I wrote a little file (tar cvf /dev/st2 /etc/passwd) > the next rewind operation will be ok. > > I have no scsi conflict on my SCSI chains and I put a > terminator at the end of it. > > Is it a problem with dump and mt or with my scsi device driver. > > Any suggestions would be greatly appreciated > > Thanks ! > > > -- > > > > -- > > --------------------------------------------------------------------- > Jean-Philippe BATTU Phone : (33) 04 76 29 73 43 > Localisation: B1/403 Fax : (33) 04 76 29 75 18 > Mail : [EMAIL PROTECTED] > > Bull, 01 Rue de Provence > B.P. 208 > 38432 Echirolles FRANCE > --------------------------------------------------------------------- _______________________________________________ Bug-fileutils mailing list [EMAIL PROTECTED] http://mail.gnu.org/mailman/listinfo/bug-fileutils
