Ludovic Courtès <l...@gnu.org> skribis: > The ISO installer image as produced on commit > 4a0b87f0ec5b6c2dcf82b372dd20ca7ea6acdd9c by > > guix system disk-image --file-system-type=iso9660 \ > -s i686-linux gnu/system/install.scm > > contains unreadable file(s), at least /var/guix/db/db.sqlite.
I can reproduce the I/O error by mounting the image: --8<---------------cut here---------------start------------->8--- ludo@ribbon ~/src/guix$ sudo losetup /dev/loop0 /gnu/store/1yanxg3cz5wi6vhpvhipxvmjwm201fbm-image.iso ludo@ribbon ~/src/guix$ sudo mount -t iso9660 /dev/loop /mnt/disk/ mount: /mnt/disk: WARNING: device write-protected, mounted read-only. ludo@ribbon ~/src/guix$ cat < /mnt/disk/var/guix/db/db.sqlite > /dev/null cat: -: Eraro de en-eligo ludo@ribbon ~/src/guix$ dmesg |tail [ 41.186408] shepherd[1]: Service guix-daemon has been started. [ 45.725418] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [ 45.933911] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready [ 49.496112] e1000e: enp0s31f6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 49.496165] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready [ 203.358136] ISO 9660 Extensions: RRIP_1991A [ 215.199352] attempt to access beyond end of device [ 215.199357] loop0: rw=524288, want=1903876, limit=1899264 [ 215.199362] attempt to access beyond end of device [ 215.199363] loop0: rw=0, want=1903532, limit=1899264 --8<---------------cut here---------------end--------------->8--- So the problems lies with the VM that creates the image. Ludo’.
