Thanks, I'll check it out. Douglas
On Tue, Oct 27, 2020, 12:25 PM Julien Lepiller <[email protected]> wrote: > Hi Douglas, > > I think I've seen this before and the solution was to use the latest > image, instead of the latest release because this issue was fixed after the > last release. You can find more info on the latest installer at > http://guix.gnu.org/en/download/latest/ > > Please tell us if it solves your issue or not! > > Le 27 octobre 2020 10:23:07 GMT-04:00, Douglas Linford <[email protected]> > a écrit : >> >> Good day, >> I am new to Guix, but not Linux, so I am familiar with Linux and it's >> structures. >> Upon my initial install of Guix, the boot will start, but always hangs. >> The last four lines in the boot messages are as follows... >> >> 1. populating /etc from >> /gnu/store/mfmgcsra291k3psl7mippy53fhqkf912-etc... >> 2. error in finalization thread: Success >> 3. [ 4.190744] udevd[217]: no sender credentials received, message >> ignored >> 4. [ 5.889796] Error: Driver 'pcspkr' is already registered, >> aborting... >> >> And the boot process stops. It seems it would be a hardware issue. >> My enclosed screenshot shows the /gnu/store folder. >> And as you see, all modify times show a date of Dec 31 1969. >> So, am I seeing a corrupted store, or maybe a corrupted install usb >> stick...or?Any thoughts or resolutions? >> >> Respectfully, >> Douglas Linford >> >> >> [image: Sent from Mailspring] > >
