It might be my untrained eye, but to me this also very much looks like the errors I was getting installing and booting the HURD on a brand new IDE.
------8<------- > hd0: irq timeout: status=0x58 { DriveReady SeekComplete DataRequest } > hd0: irq timeout: status=0x58 { DriveReady SeekComplete } > hd0: irq timeout: status=0x58 { DriveReady SeekComplete DataRequest } > ide0: reset: success > hd0: irq timeout: status=0x58 { DriveReady SeekComplete } > hd0: irq timeout: status=0x58 { DriveReady SeekComplete } > hd0: irq timeout: status=0x58 { DriveReady SeekComplete } > hd0: irq timeout: status=0x58 { DriveReady SeekComplete DataRequest } > ide0: reset: success > hd0: irq timeout: status=0x58 { DriveReady SeekComplete } > end_request: I/O error, dev 03:00, sector 2 ------8<------- Thread: Debian Hurd Installer problems. Best wishes, Alex Samuel Thibault writes: > Riccardo Mottola, le Mon 11 Feb 2013 19:28:32 +0100, a écrit : >> hd0: dma_intr: status=0x51 { DriveReady SeekCompleteError } >> hd0: dma_intr: error=0x40 { UncorrectableError }, LBAsect=44914186, >> sector=27804896 >> end_request: I/O error, dev 03:07, sector 27804896 >> >> I hope my drive is not failing and that it is some kind of hardware error? > > Well, IIRC this precise kind of error (SeekCompleteError) means the disk > could not find the sector. So it likely means a hardware issue. > > Samuel