Hi: I got to install Debian GNU/Hurd in my T410 using the installer, but without rumpdisk and setting SATA interface in compatibility mode to emulate IDE device.
But, when i set the interface in AHCI mode, and i execute the installer with "noide" flag, this doesn't detect the cdrom. This is the problem El domingo 10 de marzo de 2024, jbra...@dismail.de escribió: > March 9, 2024 at 6:32 PM, "Almudena Garcia" <liberamenso10...@gmail.com> > wrote: > > > > > > > I've just found other capture, of the step which fails > > > I don't know, but it'll probably be much simpler to debug from an > > > installed system. > > > > But, how can I install the system in real hardware without using the > > installer? > > I tried to install it in a harddisk through a VM, connecting the harddisk > > using a USB dock. But the system didn't even boot. > > And I think that the img file doesn't have rumpdisk configured. > > > > El dom, 10 mar 2024 a las 0:24, Samuel Thibault (<samuel.thiba...@gnu.org>) > > escribió: > > > > > > > > Almudena Garcia, le dim. 10 mars 2024 00:21:51 +0100, a ecrit: > > > > Ok. Then I will wait some time until get a more stable image. I'm > > > > making some > > > > test to check the rumpdisk support. > > > > In Qemu and VirtualBox, rumpdisk detect the SATA CDROM and HDD > > > > successfully, > > > > but in my Thinkpad laptops the CDROM unit seems not be detected. > > > > Even in the installer shell, the cdrom unit are not listed. I don't > > > > know the > > > > reason of this issue. > > > > > > > > But the only error that I found is this. > > > > > > > > imagen.png > > > > > > By the way, did you get the Hurd to run bare metal on the T410? > > Joshu -- Enviado desde mi dispositivo Sailfish