Hello, First of all, thank you for the immediate response. I am using slax in order to make my build and after searching a bit I found out that slax does not support IPv6. I assume that this will not affect my build, and IPv6 is going to work. Right?
On 09/03/2012, Simon Josefsson <[email protected]> wrote: > loytsos <[email protected]> writes: > >> Hello, >> >> I am building LFS 7.1 and I am facing a problem in chapter 6.34. >> This is the error I get after testing the compilation results: > ... >> PING 127.0.0.1 (127.0.0.1): 56 data bytes >> 64 bytes from 127.0.0.1: icmp_seq=0 ttl=64 time=0.048 ms >> --- 127.0.0.1 ping statistics --- >> 1 packets transmitted, 1 packets received, 0% packet loss >> round-trip min/avg/max/stddev = 0.048/0.048/0.048/0.000 ms >> Failed at pinging ::1. >> FAIL: ping-localhost.sh > > Hi! Is IPv6 working? The self-test tries to ping ::1. If that doesn't > work, for example if you haven't configured the interfaces correctly, > the self-test will fail. The rest of the build should be fine though. > > Probably the self-check should only test IPv6 if config.h defines IPV6. > > /Simon >
