Send buglog mailing list submissions to
[email protected]
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.openmoko.org/mailman/listinfo/buglog
or, via email, send a message with subject or body 'help' to
[EMAIL PROTECTED]
You can reach the person managing the list at
[EMAIL PROTECTED]
When replying, please edit your Subject line so it is more specific
than "Re: Contents of buglog digest..."
Today's Topics:
1. Your Bugzilla buglist needs attention. ([EMAIL PROTECTED])
2. [Bug 560] Removing battery from Neo makes nasty noise
([EMAIL PROTECTED])
3. [Bug 887] U-Boot initialization race condition: Hangs on boot
([EMAIL PROTECTED])
--- Begin Message ---
[This e-mail has been automatically generated.]
You have one or more bugs assigned to you in the Bugzilla
bugsystem (http://bugzilla.openmoko.org/cgi-bin/bugzilla/) that require
attention.
All of these bugs are in the NEW state, and have not been touched
in 7 days or more. You need to take a look at them, and
decide on an initial action.
Generally, this means one of three things:
(1) You decide this bug is really quick to deal with (like, it's INVALID),
and so you get rid of it immediately.
(2) You decide the bug doesn't belong to you, and you reassign it to someone
else. (Hint: if you don't know who to reassign it to, make sure that
the Component field seems reasonable, and then use the "Reassign bug to
owner of selected component" option.)
(3) You decide the bug belongs to you, but you can't solve it this moment.
Just use the "Accept bug" command.
To get a list of all NEW bugs, you can use this URL (bookmark it if you like!):
http://bugzilla.openmoko.org/cgi-bin/bugzilla/buglist.cgi?bug_status=NEW&[EMAIL
PROTECTED]
Or, you can use the general query page, at
http://bugzilla.openmoko.org/cgi-bin/bugzilla/query.cgi.
Appended below are the individual URLs to get to all of your NEW bugs that
haven't been touched for a week or more.
You will get this message once a day until you've dealt with these bugs!
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=934
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=935
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=1012
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=1081
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=1089
--- End Message ---
--- Begin Message ---
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=560
[EMAIL PROTECTED] changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEW |ASSIGNED
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
--- End Message ---
--- Begin Message ---
http://bugzilla.openmoko.org/cgi-bin/bugzilla/show_bug.cgi?id=887
------- Additional Comments From [EMAIL PROTECTED] 2007-12-16 08:48 -------
I can add some information to this (not sure if it's more relevant here or for
#874, so I'm picking the one with the higher priority).
Using my own builds (with MokoMakefile) of:
uImage-2.6.22.5-moko11+svnr3238-r10-neo1973.bin
u-boot-gta01bv4-1.3.0+git20071214+svnr3648-1.bin
my Neo does not hang on boot _if_ I have the u-boot stdin/stdout/stderr set to
"serial". If they are set to "usbtty" then the Neo hangs at the u-boot splash
screen. Booting through the "Aux" menu always works.
This was tested with no debug-board or USB cable connected to the Neo. In my
earlier debug-board testing with these software versions, I never saw any of the
"oops" messages mentioned in this bug report (regardless of which console I
used).
My u-boot environment is shown below.
GTA01Bv4 # printenv
bootcmd=setenv bootargs ${bootargs_base} ${mtdparts}; nand read.e 0x32000000
kernel; bootm 0x32000000
baudrate=115200
usbtty=cdc_acm
mtdids=nand0=neo1973-nand
bootargs=rootfstype=jffs2 root=/dev/mtdblock4 console=ttySAC0,115200
console=tty0 loglevel=8
mtdparts=mtdparts=neo1973-nand:0x00040000(u-boot),0x00004000(u-boot_env),0x00200000(kernel),0x000a0000(splash),0x03d1c000(rootfs)
splashimage=nand read.e 0x32000000 splash;unzip 0x32000000 0x33d00000
bootargs_base=rootfstype=jffs2 root=/dev/mtdblock4 console=tty0 loglevel=8
quiet=1
bootdelay=10
menu_2=SerConsole:setenv stdin serial;setenv stdout serial;setenv stderr
serial;saveenv
menu_3=USBConsole:setenv stdin usbtty;setenv stdout usbtty;setenv stderr
usbtty;saveenv
menu_4=ForceChg:neo1973 charger fast
menu_5=Poweroff:neo1973 power-off
menu_1=SDBoot:setenv bootargs console=tty0 loglevel=8 rootdelay=5
root=/dev/mmcblk0p1 ${mtdparts};mmcinit;ext2load mmc 0 0x32000000 /uImage;bootm
0x32000000
stdin=usbtty
stdout=usbtty
stderr=usbtty
partition=nand0,0
mtddevnum=0
mtddevname=u-boot
pcf50606_int1=0x4a
Environment size: 1060/16380 bytes
------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.
--- End Message ---
_______________________________________________
buglog mailing list
[email protected]
http://lists.openmoko.org/mailman/listinfo/buglog
