Send buglog mailing list submissions to
[email protected]
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.openmoko.org/mailman/listinfo/buglog
or, via email, send a message with subject or body 'help' to
[EMAIL PROTECTED]
You can reach the person managing the list at
[EMAIL PROTECTED]
When replying, please edit your Subject line so it is more specific
than "Re: Contents of buglog digest..."
Today's Topics:
1. Re: Openmoko Bug #1852: Can't register on GSM Network
(Openmoko Public Trac)
2. Re: Openmoko Bug #1863: illume-config package does not
provide the spanner/wrench (Openmoko Public Trac)
3. Openmoko Bug #1944: [Location] The tag saved at wrong place
while moving (Openmoko Public Trac)
4. Re: Openmoko Bug #1522: Update packages (Openmoko Public Trac)
5. Re: Openmoko Bug #1863: illume-config package does not
provide the spanner/wrench (Openmoko Public Trac)
6. Re: Openmoko Bug #1635: [Dialer] An outgoing call is not
established (connected) but goes from the dialing state directly
to disconnected (Openmoko Public Trac)
7. Openmoko Bug #1945: om2008.8: Sometimes I can't call my
FreeRunner when it is in suspend (with logread/x.log/dmesg)
(Openmoko Public Trac)
8. Re: Openmoko Bug #1928: Settings don't change the suspend
time (Openmoko Public Trac)
--- Begin Message ---
#1852: Can't register on GSM Network
-------------------------+--------------------------------------------------
Reporter: jonquark | Owner: openmoko-devel
Type: defect | Status: assigned
Priority: normal | Milestone: Om2008.9
Component: Distro | Version: GTA02v6
Severity: normal | Resolution:
Keywords: | Blockedby:
Reproducible: always | Blocking:
-------------------------+--------------------------------------------------
Comment(by graeme):
Hi, I just went out and purchased a O2 SIM pre-pay.
Using qtopia-x11 it registers to the network and I can make/receive calls
fine.
--
Ticket URL: <https://docs.openmoko.org/trac/ticket/1852#comment:7>
docs.openmoko.org <http://docs.openmoko.org/trac/>
openmoko trac
--- End Message ---
--- Begin Message ---
#1863: illume-config package does not provide the spanner/wrench
---------------------------+------------------------------------------------
Reporter: Yorick | Owner: raster
Type: defect | Status: closed
Priority: normal | Milestone: Om2008.8
Component: E - Illume | Version: GTA02v5
Severity: normal | Resolution: invalid
Keywords: | Blockedby:
Reproducible: always | Blocking:
---------------------------+------------------------------------------------
Comment(by flamma):
Isn't there a way to call the configuration application from the terminal?
--
Ticket URL: <https://docs.openmoko.org/trac/ticket/1863#comment:7>
docs.openmoko.org <http://docs.openmoko.org/trac/>
openmoko trac
--- End Message ---
--- Begin Message ---
#1944: [Location] The tag saved at wrong place while moving
------------------------+---------------------------------------------------
Reporter: wendy_hung | Owner: jeremy
Type: defect | Status: new
Priority: highest | Milestone: Om2008.9
Component: Locations | Version: Om2008.8
Severity: blocker | Keywords:
Blockedby: | Reproducible: always
Blocking: |
------------------------+---------------------------------------------------
kernel:20080826-asu.stable-uImage.bin
root file system:20080829-asu.stable-rootfs.jffs2
summary:
The tag saved at wrong place while moving
Steps+current results:
1) launch location and get GPS fix
2) let the device moving (jump into a car or walking)
3) try to save a tag while moving
4) "Touch Me" at place A,typing tag also moving. Save the tag at place B,
the tag won't log the place as A but B.
5) It will have a very big gap if you're moving fast but typing slow....
Expected:
save the location when you click the red spot, not when you press "Save"
--
Ticket URL: <https://docs.openmoko.org/trac/ticket/1944>
docs.openmoko.org <http://docs.openmoko.org/trac/>
openmoko trac
--- End Message ---
--- Begin Message ---
#1522: Update packages
----------------------------+-----------------------------------------------
Reporter: wendy_hung | Owner: tick
Type: enhancement | Status: in_testing
Priority: high | Milestone: Om2008.9
Component: Installer | Version:
Severity: normal | Resolution:
Keywords: must have | Blockedby:
Reproducible: | Blocking:
----------------------------+-----------------------------------------------
Comment(by wendy_hung):
tested with the image:
kernel:20080826-asu.stable-uImage.bin
root file system:20080901-asu.stable-rootfs.jffs2
Still can't test with this now, keep watching this and test later.
--
Ticket URL: <https://docs.openmoko.org/trac/ticket/1522#comment:13>
docs.openmoko.org <http://docs.openmoko.org/trac/>
openmoko trac
--- End Message ---
--- Begin Message ---
#1863: illume-config package does not provide the spanner/wrench
---------------------------+------------------------------------------------
Reporter: Yorick | Owner: raster
Type: defect | Status: closed
Priority: normal | Milestone: Om2008.8
Component: E - Illume | Version: GTA02v5
Severity: normal | Resolution: invalid
Keywords: | Blockedby:
Reproducible: always | Blocking:
---------------------------+------------------------------------------------
Comment(by raster):
no :( e was designed so it always had a gui way to rescue you. if you can
change it in the gui. but e for asu has basically had that bit removed.
the problem is the config panel is not a core e function - it is a
function that is provided by a module - illume provides a replacement for
the default e one. so i could add it - but it really is not intended to
work that way. check in fso space for updates/changes here (think of it
this way - if you removed the preferences menu from gimp... in a .rc file
- and then wondered why u couldnt access the preferences option to re-
enable it in the gui? :) u can get it back - u just have to fille with
configs. config are binary - they can be decompiled to text and recompiled
(eet the tool does that), but its easier just to have a set of system
profiels that expose these and flip to them).
--
Ticket URL: <https://docs.openmoko.org/trac/ticket/1863#comment:8>
docs.openmoko.org <http://docs.openmoko.org/trac/>
openmoko trac
--- End Message ---
--- Begin Message ---
#1635: [Dialer] An outgoing call is not established (connected) but goes from
the
dialing state directly to disconnected
---------------------------+------------------------------------------------
Reporter: regina_kim | Owner: zecke
Type: defect | Status: in_testing
Priority: high | Milestone: Om2008.9
Component: Qtopia | Version:
Severity: critical | Resolution:
Keywords: must have | Blockedby:
Reproducible: | Blocking:
---------------------------+------------------------------------------------
Changes (by erin_yueh):
* status: new => in_testing
Comment:
from the attached log file, it looks like we have problem on retrieving
all messages.
in the beginning, the modem works just fine, but after send this AT
command 'AT+CGML=4', it goes to crazy and returns different cme error
codes. I guess it probably stores a lot of SMS message in this SIM card.
23:50:58 om-gta02 user.notice root: AtChat : T : "AT+CMGL=4"
Aug 25 23:50:58 om-gta02 user.notice root: AtChat : F : "+CMS ERROR: 320"
my suggestion is to modify this AT command, if it makes modem go crazy. We
could separate it to 4 commands. Like 'AT+CMGL=0', 'AT+CMGL=1',
'AT+CMGL=2', and 'AT+CMGL=3'.
from 3GPP spec TS 27.005:
0 "REC UNREAD" received unread message (i.e. new message)
1 "REC READ" received read message
2 "STO UNSENT" stored unsent message (only applicable to SMs)
3 "STO SENT" stored sent message (only applicable to SMs)
4 "ALL" all messages (only applicable to +CMGL command)
also, we would need testing team helps to verify this bug again, since the
subject is about the dialer, not messaging. also, please try to use a SIM
card with lots of SIM SMS inside.
--
Ticket URL: <https://docs.openmoko.org/trac/ticket/1635#comment:13>
docs.openmoko.org <http://docs.openmoko.org/trac/>
openmoko trac
--- End Message ---
--- Begin Message ---
#1945: om2008.8: Sometimes I can't call my FreeRunner when it is in suspend
(with
logread/x.log/dmesg)
---------------------+------------------------------------------------------
Reporter: dolfje | Owner: julian_chu
Type: defect | Status: new
Priority: highest | Milestone:
Component: Distro | Version:
Severity: blocker | Keywords: suspend om2008.8
Blockedby: | Reproducible: always
Blocking: |
---------------------+------------------------------------------------------
If I put suspend mode on on the om 2008.8 distro, I (and others) sometimes
can't call my FreeRunner.
Steps for reproduce:
1. put the software to suspend in 10sec
2. Call my FreeRunner
3. if it succeed, leave it alone and let it suspend again
4. wait for a couple minutes (sometimes 2 min, sometimes 30 min)
5. goto step 2
Expected result:
- You should be able to keep on calling the FreeRunner.
Actual result:
- The last time I called, it didn't resume on calling (around 10h03 ) and
I get the voice mail on the other phone. I hang up and my FreeRunner wakes
up and says I've missed a phone call.
u-boot: 1.3.2-moko12
(http://downloads.openmoko.org/releases/Om2008.8-update/gta02v5_and_up-u-boot.bin)
kernel:
http://downloads.openmoko.org/releases/Om2008.8-update/Om2008.8-gta02-20080826.uImage.bin
rootfs:
http://downloads.openmoko.org/releases/Om2008.8-update/Om2008.8-gta02-20080830.rootfs.jffs2
dmesg, logread and x.log attached. (ps. The problem is around 10h03, then
I've called it and it didn't resume)
reproducible: always, but sometimes it takes longer before it don't resume
on phone-call.
--
Ticket URL: <https://docs.openmoko.org/trac/ticket/1945>
docs.openmoko.org <http://docs.openmoko.org/trac/>
openmoko trac
--- End Message ---
--- Begin Message ---
#1928: Settings don't change the suspend time
-------------------------+--------------------------------------------------
Reporter: wilk | Owner: marek
Type: defect | Status: accepted
Priority: normal | Milestone: Om2008.9
Component: Settings | Version:
Severity: blocker | Resolution:
Keywords: | Blockedby:
Reproducible: always | Blocking:
-------------------------+--------------------------------------------------
Comment(by flamma):
I have noticed today that when I stop the xserver, I can see in the phone
screen, in the console, a lot of messages like "xset: cannot open
display", or similar (now my screen doesn't turn on). I don't know if that
is related. This time several wake up didn't brought up the black screen,
but the desktop. Also don't know if that has relationship.
--
Ticket URL: <https://docs.openmoko.org/trac/ticket/1928#comment:10>
docs.openmoko.org <http://docs.openmoko.org/trac/>
openmoko trac
--- End Message ---
_______________________________________________
buglog mailing list
[email protected]
http://lists.openmoko.org/mailman/listinfo/buglog
