Send buglog mailing list submissions to
[email protected]
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.openmoko.org/mailman/listinfo/buglog
or, via email, send a message with subject or body 'help' to
[EMAIL PROTECTED]
You can reach the person managing the list at
[EMAIL PROTECTED]
When replying, please edit your Subject line so it is more specific
than "Re: Contents of buglog digest..."
Today's Topics:
1. Re: Openmoko Bug #1597: after a long suspend time, kernel
thread events/0 sits eating 30% cpu (Openmoko Public Trac)
2. Re: Openmoko Bug #1597: after a long suspend time, kernel
thread events/0 sits eating 30% cpu (Openmoko Public Trac)
3. Re: Openmoko Bug #1597: after a long suspend time, kernel
thread events/0 sits eating 30% cpu (Openmoko Public Trac)
4. Re: Openmoko Bug #1597: after a long suspend time, kernel
thread events/0 sits eating 30% cpu (Openmoko Public Trac)
5. Re: Openmoko Bug #1991: [Suspend] unable to suspend, just
stay black screen after wake up by power button from suspend
(Openmoko Public Trac)
6. Re: Openmoko Bug #1653: [QT-Contacts] view contact info,
option menu covered "Hide" (Openmoko Public Trac)
7. Openmoko Bug #2063: mmcblk0: unknown partition table
(Openmoko Public Trac)
--- Begin Message ---
#1597: after a long suspend time, kernel thread events/0 sits eating 30% cpu
--------------------------------+-------------------------------------------
Reporter: raster | Owner: zecke
Type: defect | Status: in_testing
Priority: normal | Milestone:
Component: System Software | Version:
Severity: major | Resolution:
Keywords: | Blockedby:
Reproducible: | Blocking:
--------------------------------+-------------------------------------------
Comment(by lala):
I left my phone connected to the wall charger and it happened again over
night. In the morning the battery was 95% full (batmon). I've seen that
"SDIO Helper" also eat around 5% from CPU. In the /tmp/x.log I've seen
"CHANGE PW SAVE MODE TO 3 / 4" between a lot of "...caches flushed.".
So, by doing nothing I can reproduce this in less than 23 hours. I mean,
no gps activated, no gpsd started, no wifi, no bt, no phone calls received
or initiated, not playing with accelerometers. Just lunching clock
(qtopia), Settings-exposure (non-stop), batmon, dmesg, htop (non-stop),
xterm (non-stop) and pluging/unpluging into/from usb.
rootfs: Om2008.8-update (updated about 3 weeks ago)
kernel: Om2008.9-gta02-20080916.uImage.bin (has the same md5 like
Om2008.8-gta02-20080903.uImage.bin)
uboot: gta02v5_and_up-u-boot.bin from daily builds (2008.09.30)
--
Ticket URL: <https://docs.openmoko.org/trac/ticket/1597#comment:30>
docs.openmoko.org <http://docs.openmoko.org/trac/>
openmoko trac
--- End Message ---
--- Begin Message ---
#1597: after a long suspend time, kernel thread events/0 sits eating 30% cpu
--------------------------------+-------------------------------------------
Reporter: raster | Owner: zecke
Type: defect | Status: in_testing
Priority: normal | Milestone:
Component: System Software | Version:
Severity: major | Resolution:
Keywords: | Blockedby:
Reproducible: | Blocking:
--------------------------------+-------------------------------------------
Comment(by lala):
Is it possible to be from battery kernel-module?
One time I've seen a lot of errors in dmesg with the words "current",
"property", "power", "supply", "bat", from what I remember.
--
Ticket URL: <https://docs.openmoko.org/trac/ticket/1597#comment:31>
docs.openmoko.org <http://docs.openmoko.org/trac/>
openmoko trac
--- End Message ---
--- Begin Message ---
#1597: after a long suspend time, kernel thread events/0 sits eating 30% cpu
--------------------------------+-------------------------------------------
Reporter: raster | Owner: zecke
Type: defect | Status: in_testing
Priority: normal | Milestone:
Component: System Software | Version:
Severity: major | Resolution:
Keywords: | Blockedby:
Reproducible: | Blocking:
--------------------------------+-------------------------------------------
Comment(by lala):
I forgot to say: suspend was disabled with the wrench and screensaver was
disabled with "xset s off". I've also changed brightness and profile from
time to time.
--
Ticket URL: <https://docs.openmoko.org/trac/ticket/1597#comment:32>
docs.openmoko.org <http://docs.openmoko.org/trac/>
openmoko trac
--- End Message ---
--- Begin Message ---
#1597: after a long suspend time, kernel thread events/0 sits eating 30% cpu
--------------------------------+-------------------------------------------
Reporter: raster | Owner: zecke
Type: defect | Status: in_testing
Priority: normal | Milestone:
Component: System Software | Version:
Severity: major | Resolution:
Keywords: | Blockedby:
Reproducible: | Blocking:
--------------------------------+-------------------------------------------
Comment(by lala):
I left my phone connected to the wall charger and it happened again over
night. In the morning the battery was 95% full (batmon). I've seen that
"SDIO Helper" also eat around 5% from CPU. In the /tmp/x.log I've seen
"CHANGE PW SAVE MODE TO 3 / 4" between a lot of "...caches flushed.".
So, by doing nothing I can reproduce this in less than 23 hours. I mean,
no gps activated, no gpsd started, no wifi, no bt, no phone calls received
or initiated, not playing with accelerometers. Just lunching clock
(qtopia), Settings-exposure (non-stop), batmon, dmesg, htop (non-stop),
xterm (non-stop) and pluging/unpluging into/from usb.
rootfs: Om2008.8-update (updated about 3 weeks ago)
kernel: Om2008.9-gta02-20080916.uImage.bin (has the same md5 like
Om2008.8-gta02-20080903.uImage.bin)
uboot: gta02v5_and_up-u-boot.bin from daily builds (2008.09.30)
--
Ticket URL: <https://docs.openmoko.org/trac/ticket/1597#comment:30>
docs.openmoko.org <http://docs.openmoko.org/trac/>
openmoko trac
--- End Message ---
--- Begin Message ---
#1991: [Suspend] unable to suspend, just stay black screen after wake up by
power
button from suspend
--------------------------------+-------------------------------------------
Reporter: regina_kim | Owner: matt_hsu
Type: defect | Status: assigned
Priority: high | Milestone: Om2008.10
Component: System Software | Version:
Severity: critical | Resolution:
Keywords: | Blockedby:
Reproducible: sometimes | Blocking:
--------------------------------+-------------------------------------------
Changes (by wendy_hung):
* owner: openmoko-kernel => matt_hsu
* status: new => assigned
Comment:
Tested with the base image, still sometimes happen like that.
Had shown this to Matt.
Tested day:2008.10.07
sorry already updated so can't attach a opkg list_installed...
Will keep track on this bug. :)
--
Ticket URL: <https://docs.openmoko.org/trac/ticket/1991#comment:8>
docs.openmoko.org <http://docs.openmoko.org/trac/>
openmoko trac
--- End Message ---
--- Begin Message ---
#1653: [QT-Contacts] view contact info, option menu covered "Hide"
---------------------------+------------------------------------------------
Reporter: wendy_hung | Owner: zecke
Type: defect | Status: reopened
Priority: normal | Milestone:
Component: Qtopia | Version:
Severity: normal | Resolution:
Keywords: | Blockedby:
Reproducible: always | Blocking:
---------------------------+------------------------------------------------
Changes (by wendy_hung):
* reproducible: => always
* status: closed => reopened
* resolution: fixed =>
* milestone: Om2008.8 =>
Comment:
Tested with base image,
Tested day: 2008.10.08
Opkg installed list: attach later
It happen again....and it's not only happen in contact also happen with
other application which need option menu.
--
Ticket URL: <https://docs.openmoko.org/trac/ticket/1653#comment:6>
docs.openmoko.org <http://docs.openmoko.org/trac/>
openmoko trac
--- End Message ---
--- Begin Message ---
#2063: mmcblk0: unknown partition table
---------------------+------------------------------------------------------
Reporter: goldie | Owner: openmoko-devel
Type: defect | Status: new
Priority: normal | Milestone:
Component: unknown | Version:
Severity: normal | Keywords:
Blockedby: | Reproducible:
Blocking: |
---------------------+------------------------------------------------------
After removing the SD card from GTA02-V5 to check possible problems in
#1691 and reinserting it back i've run into problems with my SD card (now
I have no GSM WIFI and SD after upgrade from 2007.x). First i've got:
{{{
glamo-mci glamo-mci.0: powered (vdd = 15) clk: 195kHz div=255 (req:
195kHz). Bus width=0
glamo-mci glamo-mci.0: powered (vdd = 15) clk: 195kHz div=255 (req:
195kHz). Bus width=0
glamo-mci glamo-mci.0: powered (vdd = 15) clk: 195kHz div=255 (req:
195kHz). Bus width=0
glamo-mci glamo-mci.0: powered (vdd = 15) clk: 195kHz div=255 (req:
195kHz). Bus width=0
glamo-mci glamo-mci.0: powered (vdd = 15) clk: 195kHz div=255 (req:
195kHz). Bus width=0
glamo-mci glamo-mci.0: powered (vdd = 15) clk: 16666kHz div=2 (req:
16666kHz). Bus width=0
glamo-mci glamo-mci.0: powered (vdd = 15) clk: 16666kHz div=2 (req:
16666kHz). Bus width=2
mmc0: new high speed SDHC card at address d555
mmcblk1: mmc0:d555 SU08G 7977472KiB
mmcblk1: p1
EXT3-fs error (device mmcblk1): ext3_check_descriptors: Block bitmap for
group 1 not in group (block 0)!
EXT3-fs: group descriptors corrupted!
FAT: bogus number of reserved sectors
VFS: Can't find a valid FAT filesystem on dev mmcblk1p1.
FAT: bogus number of reserved sectors
VFS: Can't find a valid FAT filesystem on dev mmcblk1p1.
}}}
After halt:
{{{
glamo-mci glamo-mci.0: powered (vdd = 15) clk: 195kHz div=255 (req:
195kHz). Bus width=0
glamo-mci glamo-mci.0: powered (vdd = 15) clk: 195kHz div=255 (req:
195kHz). Bus width=0
glamo-mci glamo-mci.0: powered (vdd = 15) clk: 195kHz div=255 (req:
195kHz). Bus width=0
glamo-mci glamo-mci.0: powered (vdd = 15) clk: 195kHz div=255 (req:
195kHz). Bus width=0
glamo-mci glamo-mci.0: powered (vdd = 15) clk: 195kHz div=255 (req:
195kHz). Bus width=0
glamo-mci glamo-mci.0: powered (vdd = 15) clk: 16666kHz div=2 (req:
16666kHz). Bus width=0
glamo-mci glamo-mci.0: powered (vdd = 15) clk: 16666kHz div=2 (req:
16666kHz). Bus width=2
mmc0: new high speed SDHC card at address d555
neo1973-pm-gps neo1973-pm-gps.0: FIC Neo1973 GPS Power
Managerment:starting
APM Battery Driver
bq27000-battery bq27000-battery.0: BQ27000 Battery Driver (C) 2008
Openmoko, Inc
power_supply bat: driver failed to report `status' property
mmcblk0: mmc0:d555 SU08G 7977472KiB
mmcblk0: unknown partition table
S3c2440 SDIO Host controller
pnp: the driver 'sdio_s3c24xx_hcd' has been registered
mapped channel 0 to 0
S3c24xx SDIO: IRQ:37 Detect IRQ:0 DMA channel:0 [EMAIL PROTECTED] [EMAIL
PROTECTED]
kHz
sdio_s3c24xx_hcd 00:00: driver attached
sdio_s3c24xx_hcd 00:00: SDIO device, IDs SD_0008 (active)
}}}
I've dd-ed the first 256k bytes from mmcbkl0, dmesgs, messages, list of
packages - look at http://goldie.drama.pl/openmoko/sd_card_died/
If you need more info, tell me.
--
Ticket URL: <https://docs.openmoko.org/trac/ticket/2063>
docs.openmoko.org <http://docs.openmoko.org/trac/>
openmoko trac
--- End Message ---
_______________________________________________
buglog mailing list
[email protected]
http://lists.openmoko.org/mailman/listinfo/buglog
