On Wed, Jul 8, 2009 at 3:48 AM, Adam Kirchhoff (via DragonFly issue tracker)<[email protected]> wrote: > > Adam Kirchhoff <[email protected]> added the comment: > > I recently installed 2.2.1 on a Dell Precision 490. It has one bge0 nic. It > works fine with the GENERIC UP kernel. When I rebooted into an SMP kernel > that > I built, though, I started getting the watchdog timeout errors. I found this > report and set hw.bge0.tx_coal_ticks to 400 in sysctl.conf, but that didn't > change anything. > > Anything else I can test? The NIC in question: > > b...@pci11:0:0: class=0x020000 card=0x01c11028 chip=0x160014e4 rev=0x02 > hdr=0x00 > vendor = 'Broadcom Corporation' > device = 'BCM5752 NetXtreme BCM5752 Gigabit Ethernet PCI Express' > class = network > subclass = ethernet
Did you have APIC_IO in your kernel configure? If "yes", then try removing APIC_IO and try again. Best Regards, sephe -- Live Free or Die
