2009/10/19 Tomaž Borštnar <[email protected]>: > Hello! > > I have a HP DL360G4p machine with 5 gigs of RAM, internal SATA disk > and HP SmartArray 6400 controller (2 channels) with 6400EM card (additional > 2 channels attached as daughter card) with MSA20 enclosure with SATA disks - > configured as 4 volumes. Install went fine, but dmesg prints some errors > (full dmesg output attached), but here are relevant parts: > > bge0: <Broadcom BCM5704C Dual Gigabit Ethernet> mem 0xfddf0000-0xfddfffff > irq 7 at device 2.0 on pci2 > bge0: CHIP ID 0x21000000; ASIC REV 0x02; CHIP REV 0x21; PCI-X > alignment check failed > miibus0: <MII bus> on bge0 > brgphy0: <BCM5704 10/100/1000baseT PHY> on miibus0 > brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, > 1000baseT-FDX, auto > bge0: MAC address: 00:15:60:0f:b0:e8 > bge1: <Broadcom BCM5704C Dual Gigabit Ethernet> mem 0xfdde0000-0xfddeffff > irq 7 at device 2.1 on pci2 > bge1: CHIP ID 0x21000000; ASIC REV 0x02; CHIP REV 0x21; PCI-X > alignment check failed > alignment check failed > miibus1: <MII bus> on bge1 > brgphy1: <BCM5704 10/100/1000baseT PHY> on miibus1 > brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, > 1000baseT-FDX, auto > bge1: MAC address: 00:15:60:0f:b0:e7
I think you mean the "alignment check failed", it is quite common and you can jut ignore them Best Regards, sephe -- Live Free or Die
