Issue #2585 has been updated by swildner.
On Tue, 08 Oct 2013 21:45:49 +0200, wrote: > > Issue #2585 has been updated by yggdrasil. > > > swildner wrote: >> Please try >> http://leaf.dragonflybsd.org/~swildner/0001-WIP-ciss-4-Bring-in-some-FreeBSD-fixes.patch > > I hope I applied the patch and followed man build correctly, but this > didn't change anything. For now, I replaced the card with a 3ware, here > at least the passthrough works properly, only the 3dm2 tool to manage it > seg faults on start. Can you please try it with "hw.ciss.force_interrupt=1" in /boot/loader.conf? Sascha ---------------------------------------- Bug #2585: Dfly 3.4.3 on ESXi 5.1, HP Smart Array P410 passthrough recognised, but not functioning http://bugs.dragonflybsd.org/issues/2585#change-11598 * Author: yggdrasil * Status: New * Priority: Normal * Assignee: swildner * Category: * Target version: ---------------------------------------- Just installed 3.4.3 in an ESXi on Proliant DL180G6. I wanted to use 3 disks attached to the Smart Array P410 in RAID5 mode solely for Dfly/HAMMER for backup purposes, so I configured it as passthrough in ESXi, rebooted and installed Dfly. Neither during installation, nor afterwards could I access the RAID5 array on the P410. ciss0 gets created, but seems to be malfunctioning. During boot, Dfly waits for some time after the line ciss0: PERFORMANT Transport before continuing. Could #1579 be related? All the best -- You have received this notification because you have either subscribed to it, or are involved in it. To change your notification preferences, please click here: http://bugs.dragonflybsd.org/my/account
