Issue #2892 has been reported by lhmwzy. ---------------------------------------- Bug #2892: swap_pager:indefinite wait bufferf error http://bugs.dragonflybsd.org/issues/2892
* Author: lhmwzy * Status: New * Priority: Normal * Assignee: * Category: * Target version: ---------------------------------------- on my machine,the consle show "swap_pager:indefinite wait bufferf :offset 601985024,size:4096",the system is panic,only power off and reboot,then the system will goes well. # uname -a [pts/0][2:08:51pm] DragonFly fuhai.com 4.4-RELEASE DragonFly v4.4.1.12.g25e86-RELEASE #0: Tue Jan 19 08:42:18 CST 2016 [email protected]:/usr/obj/usr/src/sys/fuhai x86_64 dmesg: Copyright (c) 2003-2015 The DragonFly Project. Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. MPTABLE: use default configuration DragonFly v4.4.1.12.g25e86-RELEASE #0: Tue Jan 19 08:42:18 CST 2016 [email protected]:/usr/obj/usr/src/sys/fuhai TSC clock: 3200021008 Hz, i8254 clock: 1193148 Hz CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (3200.13-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0xf65 Stepping = 5 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe59d<SSE3,DTES64,MON,DS_CPL,EST,TM2,CNXT-ID,CX16,xTPR,PDCM> AMD Features=0x20100800<SYSCALL,NX,LM> AMD Features2=0x1<LAHF> real memory = 1037026304 (988 MB) Warning: nbufs capped at 7634 due to physmem avail memory = 936284160 (892 MB) lapic: divisor index 0, frequency 100003905 Hz Initialize MI interrupts VMM: VMX is not supported by this Intel CPU wdog: In-kernel automatic watchdog reset enabled kbd1 at kbdmux0 md0: Malloc disk ACPI: RSDP 0x00000000000FEBF0 000024 (v02 DELL ) ACPI: XSDT 0x00000000000FD07A 00005C (v01 DELL B8K 00000014 ASL 00000061) ACPI: FACP 0x00000000000FD192 0000F4 (v03 DELL B8K 00000014 ASL 00000061) ACPI: DSDT 0x00000000FFFCA3A8 0038C6 (v01 DELL dt_ex 00001000 INTL 20050624) ACPI: FACS 0x000000003DE5C800 000040 ACPI: FACS 0x000000003DE5C800 000040 ACPI: SSDT 0x00000000FFFCDD8F 0000AC (v01 DELL st_ex 00001000 INTL 20050624) ACPI: APIC 0x00000000000FD286 000092 (v01 DELL B8K 00000014 ASL 00000061) ACPI: BOOT 0x00000000000FD318 000028 (v01 DELL B8K 00000014 ASL 00000061) ACPI: MCFG 0x00000000000FD340 00003E (v01 DELL B8K 00000014 ASL 00000061) ACPI: HPET 0x00000000000FD37E 000038 (v01 DELL B8K 00000014 ASL 00000061) ACPI: SLIC 0x00000000000FD3B6 0000C0 (v01 DELL B8K 00000014 ASL 00000061) acpi0: <DELL B8K > on motherboard ACPI: 2 ACPI AML tables successfully acquired and loaded ACPI FADT: SCI testing interrupt mode ... ACPI FADT: SCI select level/low objcache_reclaimlist objcache_reclaimlist objcache_reclaimlist objcache_reclaimlist acpi0: Power Button (fixed) acpi_timer0 on acpi0 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 acpi_hpet0: frequency 14318180 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xec00-0xecff mem 0xdfdf0000-0xdfdfffff,0xd0000000-0xd7ffffff irq 17 at device 5.0 on pci1 vgapci0: Boot video device ahci0: <ATI-SB600-SATA> port 0xfec0-0xfecf,0xfe30-0xfe33,0xfe20-0xfe27,0xfe10-0xfe13,0xfe00-0xfe07 mem 0xdfff6c00-0xdfff6fff irq 23 at device 18.0 on pci0 ahci0: AHCI 1.1 cap 0xf722ff83<S64A,NCQ,SSNTF,SMPS,SALP,SAL,SCLO,SPM,PMD,SSC,PSC,CCCS>, 4 ports, 32 tags/port, gen 2 (3Gbps) ahci0.0: Caps 42006<HPCP,MPSS,POD,SUD> ahci0.1: Caps 42006<HPCP,MPSS,POD,SUD> ahci0.2: Caps 42006<HPCP,MPSS,POD,SUD> ahci0.3: Caps 42006<HPCP,MPSS,POD,SUD> ahci0.2: No device detected ahci0.3: No device detected ahci0.0: PMPROBE(2) No Port Multiplier was found. ahci0.1: PMPROBE(2) No Port Multiplier was found. ahci0.0: PMPROBE(2) No Port Multiplier was found. ahci0.1: PMPROBE(2) No Port Multiplier was found. ahci0.0: Found DISK "WDC WD800JD-75MSA3 10.01E04" serial="WD-WMAM9NY02964" ahci0.0: tags=32/32 satacap=0706 satacap2=0000 satafea=004c NCQ=YES capacity=76293.94MB ahci0.0: f85=7469 f86=3e01 f87=4023 WC=enabled RA=enabled SEC=frozen ahci0.1: Found ATAPI "TSSTcorpDVD-ROM TS-H353B D200" serial="" ahci0.1: tags=0/32 satacap=0002 satacap2=0000 satafea=0040 NCQ=NO capacity=1.00MB ahci0.1: f85=0000 f86=0000 f87=4000 WC=notsupp RA=notsupp SEC=notsupp ahci0.1: Cannot copy rfis, CCB slot 0 is not on-chip (state=6) ahci0.1: TFES: Unable to determine errored slot ahci0.1: Failing all commands: 00000020 ahci0.1: cmd 18: timeout ahci0.1: Cannot copy rfis, CCB slot 0 is not on-chip (state=6) ahci0.1: TFES: Unable to determine errored slot ahci0.1: Failing all commands: 00000040 ahci0.1: cmd 18: timeout ahci0.1: Cannot copy rfis, CCB slot 0 is not on-chip (state=6) ahci0.1: TFES: Unable to determine errored slot ahci0.1: Failing all commands: 00000080 ahci0.1: cmd 18: timeout ahci0.1: Cannot copy rfis, CCB slot 0 is not on-chip (state=6) ahci0.1: TFES: Unable to determine errored slot ahci0.1: Failing all commands: 00000100 ahci0.1: cmd 18: timeout ahci0.1: Cannot copy rfis, CCB slot 0 is not on-chip (state=6) ahci0.1: TFES: Unable to determine errored slot ahci0.1: Failing all commands: 00000200 ahci0.1: cmd 18: timeout ahci0.1: Cannot copy rfis, CCB slot 0 is not on-chip (state=6) ahci0.1: TFES: Unable to determine errored slot ahci0.1: Failing all commands: 00000400 ahci0.1: cmd 0: timeout ohci0: <OHCI (generic) USB controller> mem 0xdfff7000-0xdfff7fff irq 16 at device 19.0 on pci0 usbus0 on ohci0 ohci1: <OHCI (generic) USB controller> mem 0xdfff8000-0xdfff8fff irq 17 at device 19.1 on pci0 usbus0: 12Mbps Full Speed USB v1.0 ugen0.1: <ATI> at usbus0 uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 usbus1 on ohci1 ohci2: <OHCI (generic) USB controller> mem 0xdfff9000-0xdfff9fff irq 18 at device 19.2 on pci0 usbus1: 12Mbps Full Speed USB v1.0 ugen1.1: <ATI> at usbus1 uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 uhub0: 2 ports with 2 removable, self powered usbus2 on ohci2 ohci3: <OHCI (generic) USB controller> mem 0xdfffa000-0xdfffafff irq 17 at device 19.3 on pci0 usbus2: 12Mbps Full Speed USB v1.0 ugen2.1: <ATI> at usbus2 uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 uhub1: 2 ports with 2 removable, self powered usbus3 on ohci3 ohci4: <OHCI (generic) USB controller> mem 0xdfffb000-0xdfffbfff irq 18 at device 19.4 on pci0 usbus3: 12Mbps Full Speed USB v1.0 ugen3.1: <ATI> at usbus3 uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3 uhub2: 2 ports with 2 removable, self powered usbus4 on ohci4 ehci0: <EHCI (generic) USB 2.0 controller> mem 0xdfff6900-0xdfff69ff irq 19 at device 19.5 on pci0 ehci0: AMD SB600/700 quirk applied usbus5: EHCI version 1.0 usbus4: 12Mbps Full Speed USB v1.0 ugen4.1: <ATI> at usbus4 uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 usbus5 on ehci0 pci0: <serial bus, SMBus> (vendor 0x1002, dev 0x4385) at device 20.0 atapci0: <ATI SB600 UDMA133 controller> port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 16 at device 20.1 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 pci0: <multimedia, HDA> (vendor 0x1002, dev 0x4383) at device 20.2 irq 16 isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib2: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pci2: <ACPI PCI bus> on pcib2 bfe0: <Broadcom BCM4401-B0 Fast Ethernet> mem 0xdfcfe000-0xdfcfffff irq 21 at device 9.0 on pci2 miibus0: <MII bus> on bfe0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto usbus5: 480Mbps High Speed USB v2.0 uhub3: 2 ports with 2 removable, self powered bfe0: MAC address: 00:1a:a0:24:d1:de cpu0: <ACPI CPU> on acpi0 cpu_cst0: <ACPI CPU C-State> on cpu0 clockmod0: <CPU clock modulation> on cpu0 ACPI: Enabled 1 GPEs in block 00 to 1F cryptosoft0: <software crypto> on motherboard orm0: <ISA Option ROMs> at iomem 0xc0000-0xc9fff,0xca000-0xcbfff on isa0 pmtimer0 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> ugen5.1: <ATI> at usbus5 uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5 CAM: Configuring 4 busses ahci0.1: Cannot copy rfis, CCB slot 0 is not on-chip (state=6) ahci0.1: TFES: Unable to determine errored slot ahci0.1: Failing all commands: 00000800 ahci0.1: cmd 0: timeout ahci0.1: Cannot copy rfis, CCB slot 0 is not on-chip (state=6) ahci0.1: TFES: Unable to determine errored slot ahci0.1: Failing all commands: 00001000 ahci0.1: cmd 0: timeout ahci0.1: Cannot copy rfis, CCB slot 0 is not on-chip (state=6) ahci0.1: TFES: Unable to determine errored slot ahci0.1: Failing all commands: 00002000 ahci0.1: cmd 0: timeout uhub4: 2 ports with 2 removable, self powered ahci0.1: Cannot copy rfis, CCB slot 0 is not on-chip (state=6) ahci0.1: TFES: Unable to determine errored slot ahci0.1: Failing all commands: 00004000 ahci0.1: cmd 0: timeout ahci0.1: Cannot copy rfis, CCB slot 0 is not on-chip (state=6) ahci0.1: TFES: Unable to determine errored slot ahci0.1: Failing all commands: 00008000 ahci0.1: cmd 0: timeout ahci0.1: Cannot copy rfis, CCB slot 0 is not on-chip (state=6) ahci0.1: TFES: Unable to determine errored slot ahci0.1: Failing all commands: 00040000 ahci0.1: cmd 18: timeout ahci0.1: Cannot copy rfis, CCB slot 0 is not on-chip (state=6) ahci0.1: TFES: Unable to determine errored slot ahci0.1: Failing all commands: 00080000 ahci0.1: cmd 18: timeout ahci0.1: Cannot copy rfis, CCB slot 0 is not on-chip (state=6) ahci0.1: TFES: Unable to determine errored slot ahci0.1: Failing all commands: 00100000 ahci0.1: cmd 18: timeout ahci0.1: Cannot copy rfis, CCB slot 0 is not on-chip (state=6) ahci0.1: TFES: Unable to determine errored slot ahci0.1: Failing all commands: 00200000 ahci0.1: cmd 18: timeout ahci0.1: Cannot copy rfis, CCB slot 0 is not on-chip (state=6) ahci0.1: TFES: Unable to determine errored slot ahci0.1: Failing all commands: 00400000 ahci0.1: cmd 18: timeout CAM: finished configuring all busses da0 at ahci0 bus 0 target 0 lun 0 da0: <SATA WDC WD800JD-75MS 10.0> Fixed Direct Access SCSI-4 device da0: Serial Number WD-WMAM9NY02964 da0: 300.000MB/s transfers da0: 76293MB (156250000 512 byte sectors: 255H 63S/T 9726C) uhub5: 10 ports with 10 removable, self powered no B_DEVMAGIC (bootdev=0) Mounting root from hammer:serno/WD-WMAM9NY02964.s1d HAMMER(ROOT) recovery check seqno=0aa1c660 HAMMER(ROOT) recovery range 3000000002d94358-3000000002d94358 HAMMER(ROOT) recovery nexto 3000000002d94358 endseqno=0aa1c661 HAMMER(ROOT) mounted clean, no recovery needed DMA space used: 6288k, remaining available: 61064k Mounting devfs swap low/high-water marks set to 20970/31455 my custom kernel config: -- You have received this notification because you have either subscribed to it, or are involved in it. To change your notification preferences, please click here: http://bugs.dragonflybsd.org/my/account
