>Number: 6381
>Category: kernel
>Synopsis: kernel panics on insertion of USB mp3 player, mass storage
>Confidential: yes
>Severity: serious
>Priority: medium
>Responsible: bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: unknown
>Arrival-Date: Wed May 19 08:00:01 GMT 2010
>Closed-Date:
>Last-Modified:
>Originator:
>Release:
>Organization:
>Environment:
System : OpenBSD 4.7
Details : OpenBSD 4.7-current (GENERIC.MP) #229: Wed May 12
02:02:27 MDT 2010
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
Architecture: OpenBSD.amd64
Machine : amd64
>Description:
Sansa c250 mp3 player, which used to work fine, now causes a kernel
panic. Unfortunately, I have no exact recollection when I've used it
last time, but it did in fact work before.
I tried to "cd /usr/src/sys/; cvs up -D 'various dates in the past'"
And recompiled the kernel; I have to admit userland wasn't recompiled.
Same panic happens all the way back to November 1st, 2009. I haven't
gone passed that date, should I continue?
Panic happens right after I plug it in to USB port.
It doesn't cause a kernel panic in single user mode.
It does cause a kernel panic in multi user mode.
It causes panic on at least two machines, both dmesgs provided.
I also have a machine where it doesn't cause a kernel panic, if dmesg
of that machine is needed, I will provide it.
This mp3 player seems to work, when plugged in to other OS on the
same machine.
>How-To-Repeat:
Plug-in mp3 player in to a USB port.
>Fix:
None available.
I'll be happy to test any patches, or anything else that's needed
GENERIC.MP single user mode (no panic):
umass0 at uhub0 port 3 configuration 1 interface 0 "SanDisk SanDisk Sansa c250"
rev 2.00/d4.30 addr2
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd1 at scsibus3 targ 1 lun 0: <SanDisk, Sansa c250, v03.> SCSI0 0/direct
removable
sd1: 1949MB, 512 bytes/sec, 3992576 sec total
sd2 at scsibus3 targ 1 lun 1: <SanDisk, Sansa c250, v03.> SCSI0 0/direct
removable
sd2: drive offline
GENERIC.MP multi user mode (panics):
umass0 at uhub0 port 3 configuration 1 interface 0 "SanDisk SanDisk Sansa c250"
rev 2.00/d4.30 addr2
umass0: using SCSI over Bulk-Only
scsibus3 at umass0: 2 targets, initiator 0
sd1 at scsibus3 targ 1 lun 0: <SanDisk, Sansa c250, v03.> SCSI0 0/direct
removable
sd1: 1949MB, 512 bytes/sec, 3992576 sec total
sd2 at scsibus3 targ 1 lun 1: <SanDisk, Sansa c250, v03.> SCSI0 0/direct
removable
sd2: drive offline
usbd_transfer: has old buffer!
usb_insert_transfer: xfer=0xffff8000001d3200 not busy 0x4f4e5155
umass0: Invalud CSW: tag 57 should be 59
umass0: Invalud CSW: tag 59 should be 60
umass0: Invalud CSW: tag 60 should be 61
umass0: Invalud CSW: tag 61 should be 62
umass0: Invalud CSW: tag 62 should be 63
panic: ehci_device_clear_toggle: queue active
Stopped at Debugger+0x5: leave
RUN AT LEAST 'trace'.....
...
ddb{0}> _
dmesg of a Thinkpad T61, where panic happens:
OpenBSD 4.7-current (GENERIC.MP) #229: Wed May 12 02:02:27 MDT 2010
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2103115776 (2005MB)
avail mem = 2033324032 (1939MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe0010 (73 entries)
bios0: vendor LENOVO version "7LETC6WW (2.26 )" date 05/11/2009
bios0: LENOVO 7658CTO
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP SSDT ECDT TCPA APIC MCFG HPET SLIC BOOT ASF! SSDT SSDT
SSDT SSDT
acpi0: wakeup devices LID_(S3) SLPB(S3) LURT(S3) DURT(S3) IGBE(S4) EXP0(S4)
EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) PCI1(S4) USB0(S3) USB1(S3) USB2(S3)
USB3(S3) USB4(S3) EHC0(S3) EHC1(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz, 2394.44 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG
cpu0: 3MB 64b/line 8-way L2 cache
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz, 2394.00 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG
cpu1: 3MB 64b/line 8-way L2 cache
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 2, remapped to apid 1
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (AGP_)
acpiprt2 at acpi0: bus 2 (EXP0)
acpiprt3 at acpi0: bus 3 (EXP1)
acpiprt4 at acpi0: bus 4 (EXP2)
acpiprt5 at acpi0: bus 5 (EXP3)
acpiprt6 at acpi0: bus 13 (EXP4)
acpiprt7 at acpi0: bus 21 (PCI1)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpipwrres0 at acpi0: PUBS
acpitz0 at acpi0: critical temperature 127 degC
acpitz1 at acpi0: critical temperature 100 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "42T4530" serial 483 type LION oem "SANYO"
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
acpidock0 at acpi0: GDCK not docked (0)
cpu0: Enhanced SpeedStep 2394 MHz: speeds: 2401, 2400, 2000, 1600, 1200, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel GM965 Host" rev 0x0c
vga1 at pci0 dev 2 function 0 "Intel GM965 Video" rev 0x0c
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0 at vga1: apic 1 int 16 (irq 10)
drm0 at inteldrm0
"Intel GM965 Video" rev 0x0c at pci0 dev 2 function 1 not configured
em0 at pci0 dev 25 function 0 "Intel ICH8 IGP M AMT" rev 0x03: apic 1 int 20
(irq 11), address 00:1c:25:76:fa:ea
uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x03: apic 1 int 20 (irq
11)
uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x03: apic 1 int 21 (irq
11)
ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x03: apic 1 int 22 (irq
11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x03: apic 1 int
17 (irq 11)
azalia0: codecs: Analog Devices AD1984, Conexant/0x2bfa, using Analog Devices
AD1984
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x03: apic 1 int 20 (irq
11)
pci1 at ppb0 bus 2
ppb1 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x03: apic 1 int 21 (irq
11)
pci2 at ppb1 bus 3
iwn0 at pci2 dev 0 function 0 "Intel Wireless WiFi Link 4965" rev 0x61: apic 1
int 17 (irq 11), MIMO 2T3R, MoW1, address 00:1f:3b:03:b1:59
ppb2 at pci0 dev 28 function 2 "Intel 82801H PCIE" rev 0x03: apic 1 int 22 (irq
11)
pci3 at ppb2 bus 4
ppb3 at pci0 dev 28 function 3 "Intel 82801H PCIE" rev 0x03: apic 1 int 23 (irq
11)
pci4 at ppb3 bus 5
ppb4 at pci0 dev 28 function 4 "Intel 82801H PCIE" rev 0x03: apic 1 int 20 (irq
11)
pci5 at ppb4 bus 13
uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x03: apic 1 int 16 (irq
10)
uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x03: apic 1 int 17 (irq
11)
uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x03: apic 1 int 18 (irq
11)
ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x03: apic 1 int 19 (irq
11)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf3
pci6 at ppb5 bus 21
cbb0 at pci6 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 1 int 16
(irq 10)
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 22 device 0 cacheline 0x8, lattimer 0xb0
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0 "Intel 82801HEM LPC" rev 0x03
pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x03: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD/CDRW UJDA775, CB03> ATAPI 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801HBM AHCI" rev 0x03: apic 1 int 16
(irq 10), AHCI 1.1
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, FUJITSU MHW2160B, 0084> SCSI3 0/direct fixed
sd0: 152627MB, 512 bytes/sec, 312581808 sec total
ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x03: apic 1 int 23
(irq 11)
iic0 at ichiic0
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
dmesg of a second machine where same exact panic happens:
OpenBSD 4.7-current (GENERIC.MP) #227: Wed Apr 28 11:55:45 MDT 2010
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 3756523520 (3582MB)
avail mem = 3642810368 (3474MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf06e0 (71 entries)
bios0: vendor American Megatrends Inc. version "1202" date 09/08/2008
bios0: ASUSTeK Computer INC. P5K-E
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC MCFG OEMB HPET OSFR
acpi0: wakeup devices P0P2(S4) P0P1(S4) UAR1(S4) PS2K(S4) EUSB(S4) USBE(S4)
P0P4(S4) P0P5(S4) P0P6(S4) P0P7(S4) P0P8(S4) P0P9(S4) GBEC(S4) USB0(S4)
USB1(S4) USB2(S4) USB3(S4) USB4(S4) USB5(S4) USB6(S4) MBT4(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz, 2671.94 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG
cpu0: 4MB 64b/line 16-way L2 cache
cpu0: apic clock running at 347MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz, 2778.47 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG
cpu1: 4MB 64b/line 16-way L2 cache
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (P0P2)
acpiprt2 at acpi0: bus 5 (P0P1)
acpiprt3 at acpi0: bus 4 (P0P4)
acpiprt4 at acpi0: bus -1 (P0P6)
acpiprt5 at acpi0: bus -1 (P0P7)
acpiprt6 at acpi0: bus 3 (P0P8)
acpiprt7 at acpi0: bus 2 (P0P9)
acpicpu0 at acpi0: PSS
acpicpu1 at acpi0: PSS
aibs0 at acpi0
acpibtn0 at acpi0: PWRB
cpu0: Enhanced SpeedStep 2778 MHz: speeds: 2664, 1998 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82G33 Host" rev 0x02
ppb0 at pci0 dev 1 function 0 "Intel 82G33 PCIE" rev 0x02: apic 2 int 16 (irq
11)
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon X600 (RV370)" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
radeondrm0 at vga1: apic 2 int 16 (irq 11)
drm0 at radeondrm0
"ATI Radeon X600 Sec" rev 0x00 at pci1 dev 0 function 1 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 2 int 16 (irq
11)
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 2 int 21 (irq
3)
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x02: apic 2 int 18 (irq
5)
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: apic 2 int 18 (irq
5)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x02: apic 2 int
22 (irq 15)
azalia0: codecs: Analog Devices AD1988B
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: apic 2 int 17 (irq
10)
pci2 at ppb1 bus 4
ppb2 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x02: apic 2 int 17 (irq
10)
pci3 at ppb2 bus 3
jmb0 at pci3 dev 0 function 0 "JMicron JMB363 IDE/SATA" rev 0x03
ahci0 at jmb0: apic 2 int 16 (irq 11), AHCI 1.0
scsibus0 at ahci0: 32 targets
pciide0 at jmb0: DMA, channel 0 wired to native-PCI, channel 1 wired to
native-PCI
pciide0: using apic 2 int 16 (irq 11) for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <ST3250820A>
wd0: 16-sector PIO, LBA48, 238475MB, 488397168 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 disabled (no drives)
ppb3 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev 0x02: apic 2 int 16 (irq
11)
pci4 at ppb3 bus 2
mskc0 at pci4 dev 0 function 0 "Marvell Yukon 88E8056" rev 0x12, Yukon-2 EC
Ultra rev. B0 (0x3): apic 2 int 17 (irq 10)
msk0 at mskc0 port A: address 00:1e:8c:6f:7a:e3
eephy0 at msk0 phy 0: 88E1149 Gigabit PHY, rev. 1
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 2 int 23 (irq
7)
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 2 int 19 (irq
14)
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: apic 2 int 18 (irq
5)
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 2 int 23 (irq
7)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
pci5 at ppb4 bus 5
em0 at pci5 dev 1 function 0 "Intel PRO/1000GT (82541GI)" rev 0x05: apic 2 int
17 (irq 10), address 00:1b:21:37:d7:99
pcib0 at pci0 dev 31 function 0 "Intel 82801IR LPC" rev 0x02
pciide1 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA, channel 0
configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 2 int 22 (irq 15) for native-PCI interrupt
atapiscsi0 at pciide1 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <LITE-ON, DVDRW LH-20A1S, 9L08> ATAPI 5/cdrom
removable
cd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic 2 int 18
(irq 5)
iic0 at ichiic0
spdmem0 at iic0 addr 0x51: 2GB DDR2 SDRAM non-parity PC2-6400CL5
spdmem1 at iic0 addr 0x53: 2GB DDR2 SDRAM non-parity PC2-6400CL5
pciide2 at pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x02: DMA, channel 0
wired to native-PCI, channel 1 wired to native-PCI
pciide2: using apic 2 int 22 (irq 15) for native-PCI interrupt
wd1 at pciide2 channel 1 drive 0: <ST3120026AS>
wd1: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
wd1(pciide2:1:0): using PIO mode 4, Ultra-DMA mode 6
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
wbsio0 at isa0 port 0x2e/2: W83627DHG rev 0x23
lm1 at wbsio0 port 0x290/8: W83627DHG
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
mtrr: Pentium Pro MTRR support
umass0 at uhub0 port 5 configuration 1 interface 0 "Generic Mass Storage
Device" rev 2.00/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd0 at scsibus2 targ 1 lun 0: <Generic, USB SD Reader, 1.00> SCSI0 0/direct
removable
sd0: drive offline
sd1 at scsibus2 targ 1 lun 1: <Generic, USB CF Reader, 1.01> SCSI0 0/direct
removable
sd1: drive offline
sd2 at scsibus2 targ 1 lun 2: <Generic, USB SM Reader, 1.02> SCSI0 0/direct
removable
sd2: drive offline
sd3 at scsibus2 targ 1 lun 3: <Generic, USB MS Reader, 1.03> SCSI0 0/direct
removable
sd3: drive offline
uhub8 at uhub1 port 4 "Terminus Technology USB 2.0 Hub [MTT]" rev 2.00/1.00
addr 2
uhub9 at uhub8 port 1 "Terminus Technology USB 2.0 Hub [MTT]" rev 2.00/1.00
addr 3
uhidev0 at uhub9 port 4 configuration 1 interface 0 "BTC USB Multimedia
Keyboard" rev 1.10/1.00 addr 4
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub9 port 4 configuration 1 interface 1 "BTC USB Multimedia
Keyboard" rev 1.10/1.00 addr 4
uhidev1: iclass 3/0, 3 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=3, output=0, feature=0
uhid2 at uhidev1 reportid 3: input=3, output=0, feature=8
uhidev2 at uhub8 port 4 configuration 1 interface 0 "Logitech USB Laser Mouse"
rev 2.00/56.00 addr 5
uhidev2: iclass 3/1
ums0 at uhidev2: 8 buttons, Z dir
wsmouse0 at ums0 mux 0
ugen0 at uhub6 port 1 "American Power Conversion Back-UPS XS 1200 FW:8.g1 .D
USB FW:g1" rev 1.10/1.06 addr 2
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
>Release-Note:
>Audit-Trail:
>Unformatted:
