hi, sorry, i can't do traceback (process install fault ?)
no ddb prompt... :( machine reboot systematically after kernel panic on install process just after creating device node and before question "add special firmware ?" i can reinstall 4096 MB ram (on my amd64 install) and wait bug back for ddb prompt, but i think evenement (i have started after panic with boot sd2a:/bsd) appeared only on install process... Miod vallat explain me on fr.comp.os.bsd to work with 3072 MB... waiting your instructions... thx a lot, and sorry for my bad english. best regards, Olivier Burelli. Le Fri, 25 Nov 2011 07:02:02 -0700, Bob Beck <b...@ualberta.ca> a C)crit : > Please get a full traceback for us. Without that your report is > fascinating, but we probably > can't find the bug. > > On 24 November 2011 15:53, Olivier Burelli <oliv...@burelli.fr> wrote: > > > hello, > > > > sorry for my bad english. > > > > after 3 upgrade succesfull i decided a fresh install for > > OpenBSD-5.0 on my PC : > > > > Intel E8200 dual core 2, 4GB ram. > > RAID : Intel SRCS16 (ami) with 3 Western digital raptor (stripping) > > > > > > > > i boot OpenBSD-5.0-amd64 install Cd. > > > > installation started > > [...] > > Disk Setup succesfull. > > [...] > > fdisk and Disklabel sucessfull. > > [...] > > Installation media and file set succesfful. > > [...] > > > > > > Saving configuration files...done. > > Generating initial host.random file...done. > > Making all device nodes...done. > > > > > > PANIC: Non dma-reachable buffer at curraddr 0x12e5e3ba0(raw) > > syncing disk... 173 172 134 68 4 done > > > > > > I have installed succesfully later > > > > - OpenBSD-i386 with 4 096 MB > > - OpenBSD-amd64 with 3072 MB > > > > > > best regards, > > > > Olivier. > > > > ************************************************************************** > > > > dmesg : OpenBSD-amd64 with 4096 MB after boot cd and choose boot > > sd2a:/bsd : > > > > ************************************************************************** > > > > OpenBSD 5.0 (RAMDISK_CD) #53: Wed Aug 17 10:17:43 MDT 2011 > > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD > > real mem = 4293132288 (4094MB) > > avail mem = 4167008256 (3973MB) > > mainbus0 at root > > bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf06f0 (73 entries) > > bios0: vendor American Megatrends Inc. version "1004" date > > 02/22/2008 bios0: ASUSTeK Computer INC. P5K WS > > acpi0 at bios0: rev 2 > > acpi0: sleep states S0 S1 S3 S4 S5 > > acpi0: tables DSDT FACP APIC MCFG OEMB HPET > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > > cpu0 at mainbus0: apid 0 (boot processor) > > cpu0: Intel(R) Core(TM)2 Duo CPU E8200 @ 2.66GHz, 2671.91 MHz > > cpu0: > > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,S SSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG > > cpu0: 6MB 64b/line 16-way L2 cache cpu0: apic clock running at > > 333MHz cpu at mainbus0: not configured > > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > > ioapic1 at mainbus0: apid 3 pa 0xfec10000, version ff, 256 pins > > ioapic1: misconfigured as apic 15, can't remap to apid 3 > > acpiprt0 at acpi0: bus 0 (PCI0) > > acpiprt1 at acpi0: bus 1 (P0P2) > > acpiprt2 at acpi0: bus 8 (P0P1) > > acpiprt3 at acpi0: bus 7 (P0P4) > > acpiprt4 at acpi0: bus -1 (P0P5) > > acpiprt5 at acpi0: bus 4 (P0P6) > > acpiprt6 at acpi0: bus 6 (PXHA) > > acpiprt7 at acpi0: bus 3 (P0P7) > > acpiprt8 at acpi0: bus -1 (P0P8) > > acpiprt9 at acpi0: bus 2 (P0P9) > > pci0 at mainbus0 bus 0 > > pchb0 at pci0 dev 0 function 0 "Intel 82G33 Host" rev 0x02 > > ppb0 at pci0 dev 1 function 0 "Intel 82G33 PCIE" rev 0x02: msi > > pci1 at ppb0 bus 1 > > vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 8800 GTS" rev 0xa2 > > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > > uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 2 > > int 16 uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: > > apic 2 int 21 uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" > > rev 0x02: apic 2 int 18 ehci0 at pci0 dev 26 function 7 "Intel > > 82801I USB" rev 0x02: apic 2 int 18 usb0 at ehci0: USB revision 2.0 > > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > > "Intel 82801I HD Audio" rev 0x02 at pci0 dev 27 function 0 not > > configured ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev > > 0x02: msi pci2 at ppb1 bus 7 > > ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x02: msi > > pci3 at ppb2 bus 4 > > ppb3 at pci3 dev 0 function 0 "NEC PCIE-PCIX" rev 0x06 > > pci4 at ppb3 bus 6 > > ami0 at pci4 dev 1 function 0 "Symbios Logic MegaRAID" rev 0x01: > > apic 2 int 19 ami0: Intel RAID SRCS16, 32b, FW 713S, BIOS vG401, > > 64MB RAM ami0: 1 channels, 0 FC loops, 4 logical drives > > scsibus0 at ami0: 40 targets > > sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct > > fixed sd0: 39999MB, 512 bytes/sector, 81917952 sectors > > sd1 at scsibus0 targ 1 lun 0: <AMI, Host drive #01, > SCSI2 0/direct > > fixed sd1: 129999MB, 512 bytes/sector, 266237952 sectors > > sd2 at scsibus0 targ 2 lun 0: <AMI, Host drive #02, > SCSI2 0/direct > > fixed sd2: 19998MB, 512 bytes/sector, 40955904 sectors > > sd3 at scsibus0 targ 3 lun 0: <AMI, Host drive #03, > SCSI2 0/direct > > fixed sd3: 19998MB, 512 bytes/sector, 40955904 sectors > > scsibus1 at ami0: 16 targets > > ppb4 at pci3 dev 0 function 1 "NEC PCIE-PCIX" rev 0x06 > > pci5 at ppb4 bus 5 > > ppb5 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x02: msi > > pci6 at ppb5 bus 3 > > mskc0 at pci6 dev 0 function 0 "Marvell Yukon 88E8052" rev 0x21, > > Yukon-2 EC rev. A3 (0x2): apic 2 int 19 msk0 at mskc0 port A: > > address 00:1d:60:44:0c:fd eephy0 at msk0 phy 0: 88E1111 Gigabit > > PHY, rev. 2 ppb6 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev > > 0x02: msi pci7 at ppb6 bus 2 > > pciide0 at pci7 dev 0 function 0 "Marvell 88SE6121 SATA" rev 0xb1: > > DMA (unsupported), channel 0 configured to native-PCI, channel 1 > > configured to native-PCI pciide0: using apic 2 int 17 for > > native-PCI interrupt atapiscsi0 at pciide0 channel 0 drive 0 > > scsibus2 at atapiscsi0: 2 targets cd0 at scsibus2 targ 0 lun 0: > > <PIONEER, DVD-RW DVR-107D, 1.05> ATAPI 5/cdrom removable pciide0: > > channel 1 ignored (not responding; disabled or no drives?) uhci3 at > > pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 2 int 23 > > uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 2 > > int 19 uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: > > apic 2 int 18 ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" > > rev 0x02: apic 2 int 23 usb1 at ehci1: USB revision 2.0 uhub1 at > > usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb7 at pci0 dev 30 > > function 0 "Intel 82801BA Hub-to-PCI" rev 0x92 pci8 at ppb7 bus 8 > > "VIA VT6306 FireWire" rev 0xc0 at pci8 dev 7 function 0 not > > configured "Intel 82801IR LPC" rev 0x02 at pci0 dev 31 function 0 > > not configured pciide1 at pci0 dev 31 function 2 "Intel 82801I > > SATA" rev 0x02: DMA, channel 0 configured to native-PCI, channel 1 > > configured to native-PCI pciide1: using apic 2 int 22 for > > native-PCI interrupt "Intel 82801I SMBus" rev 0x02 at pci0 dev 31 > > function 3 not configured pciide2 at pci0 dev 31 function 5 "Intel > > 82801I SATA" rev 0x02: DMA, channel 0 wired to native-PCI, channel > > 1 wired to native-PCI pciide2: using apic 2 int 22 for native-PCI > > interrupt usb2 at uhci0: USB revision 1.0 uhub2 at usb2 "Intel UHCI > > root hub" rev 1.00/1.00 addr 1 usb3 at uhci1: USB revision 1.0 > > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at > > uhci2: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev > > 1.00/1.00 addr 1 usb5 at uhci3: USB revision 1.0 > > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > usb6 at uhci4: USB revision 1.0 > > uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > usb7 at uhci5: USB revision 1.0 > > uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > isa0 at mainbus0 > > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > > pckbc0 at isa0 port 0x60/5 > > pckbd0 at pckbc0 (kbd slot) > > pckbc0: using irq 1 for kbd slot > > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > > uhub8 at uhub6 port 2 "vendor 0x046d G15 Keyboard Hub" rev 1.10/0.20 > > addr 2 uhidev0 at uhub8 port 1 configuration 1 interface 0 "vendor > > 0x046d G15 Gaming Keyboard" rev 2.00/1.00 addr 3 uhidev0: iclass 3/1 > > ukbd0 at uhidev0 > > wskbd1 at ukbd0 mux 1 > > wskbd1: connecting to wsdisplay0 > > uhidev1 at uhub8 port 1 configuration 1 interface 1 "vendor 0x046d > > G15 Gaming Keyboard" rev 2.00/1.00 addr 3 uhidev1: iclass 3/0, 3 > > report ids uhid at uhidev1 reportid 1 not configured > > uhid at uhidev1 reportid 2 not configured > > uhid at uhidev1 reportid 3 not configured > > uhidev2 at uhub8 port 4 configuration 1 interface 0 "vendor 0x046d > > G15 GamePanel LCD" rev 2.00/0.20 addr 4 uhidev2: iclass 3/0, 3 > > report ids uhid at uhidev2 reportid 1 not configured > > uhid at uhidev2 reportid 2 not configured > > uhid at uhidev2 reportid 3 not configured > > uhidev3 at uhub7 port 1 configuration 1 interface 0 "Razer Razer > > Copperhead Laser Mouse" rev 2.00/21.00 addr 2 uhidev3: iclass 3/0 > > uhid at uhidev3 not configured > > uhidev4 at uhub7 port 1 configuration 1 interface 1 "Razer Razer > > Copperhead Laser Mouse" rev 2.00/21.00 addr 2 uhidev4: iclass 3/1 > > ukbd1 at uhidev4 > > wskbd2 at ukbd1 mux 1 > > wskbd2: connecting to wsdisplay0 > > softraid0 at root > > scsibus3 at softraid0: 256 targets > > root on rd0a swap on rd0b dump on rd0b > > panic: Non dma-reachable buffer at curaddr 0x12e5e3ba0(raw) > > syncing disks... 173 172 134 68 4 > > OpenBSD 5.0 (GENERIC) #53: Wed Aug 17 10:07:52 MDT 2011 > > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC > > real mem = 4293132288 (4094MB) > > avail mem = 4164763648 (3971MB) > > mainbus0 at root > > bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf06f0 (73 entries) > > bios0: vendor American Megatrends Inc. version "1004" date > > 02/22/2008 bios0: ASUSTeK Computer INC. P5K WS > > acpi0 at bios0: rev 2 > > acpi0: sleep states S0 S1 S3 S4 S5 > > acpi0: tables DSDT FACP APIC MCFG OEMB HPET > > acpi0: wakeup devices P0P2(S4) P0P1(S4) PS2K(S4) UAR1(S4) EUSB(S4) > > USBE(S4) P0P4(S4) P0P5(S4) P0P6(S4) P0P7(S4) P0P8(S4) P0P9(S4) > > GBEC(S4) USB0(S4) USB1(S4) USB2(S4) USB3(S4) USB4(S4) USB5(S4) > > USB6(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at > > acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot > > processor) cpu0: Intel(R) Core(TM)2 Duo CPU E8200 @ 2.66GHz, > > 2671.98 MHz cpu0: > > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,S SSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG > > cpu0: 6MB 64b/line 16-way L2 cache cpu0: apic clock running at > > 333MHz cpu at mainbus0: not configured > > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > > ioapic1 at mainbus0: apid 3 pa 0xfec10000, version ff, 256 pins > > ioapic1: misconfigured as apic 15, can't remap to apid 3 > > acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 > > acpihpet0 at acpi0: 14318179 Hz > > acpiprt0 at acpi0: bus 0 (PCI0) > > acpiprt1 at acpi0: bus 1 (P0P2) > > acpiprt2 at acpi0: bus 8 (P0P1) > > acpiprt3 at acpi0: bus 7 (P0P4) > > acpiprt4 at acpi0: bus -1 (P0P5) > > acpiprt5 at acpi0: bus 4 (P0P6) > > acpiprt6 at acpi0: bus 6 (PXHA) > > acpiprt7 at acpi0: bus 3 (P0P7) > > acpiprt8 at acpi0: bus -1 (P0P8) > > acpiprt9 at acpi0: bus 2 (P0P9) > > acpicpu0 at acpi0 > > aibs0 at acpi0: RTMP RVLT RFAN GGRP GITM SITM > > acpibtn0 at acpi0: PWRB > > cpu0: unknown Enhanced SpeedStep CPU, msr 0x061a082006000820 > > cpu0: using only highest and lowest power states > > cpu0: Enhanced SpeedStep 2671 MHz: speeds: 2667, 2000 MHz > > pci0 at mainbus0 bus 0 > > pchb0 at pci0 dev 0 function 0 "Intel 82G33 Host" rev 0x02 > > ppb0 at pci0 dev 1 function 0 "Intel 82G33 PCIE" rev 0x02: msi > > pci1 at ppb0 bus 1 > > vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 8800 GTS" rev 0xa2 > > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > > uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 2 > > int 16 uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: > > apic 2 int 21 uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" > > rev 0x02: apic 2 int 18 ehci0 at pci0 dev 26 function 7 "Intel > > 82801I USB" rev 0x02: apic 2 int 18 usb0 at ehci0: USB revision 2.0 > > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > > azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x02: > > msi azalia0: codecs: Realtek ALC888 > > audio0 at azalia0 > > ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: msi > > pci2 at ppb1 bus 7 > > ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x02: msi > > pci3 at ppb2 bus 4 > > ppb3 at pci3 dev 0 function 0 "NEC PCIE-PCIX" rev 0x06 > > pci4 at ppb3 bus 6 > > ami0 at pci4 dev 1 function 0 "Symbios Logic MegaRAID" rev 0x01: > > apic 2 int 19 ami0: Intel RAID SRCS16, 32b, FW 713S, BIOS vG401, > > 64MB RAM ami0: 1 channels, 0 FC loops, 4 logical drives > > scsibus0 at ami0: 40 targets > > sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct > > fixed sd0: 39999MB, 512 bytes/sector, 81917952 sectors > > sd1 at scsibus0 targ 1 lun 0: <AMI, Host drive #01, > SCSI2 0/direct > > fixed sd1: 129999MB, 512 bytes/sector, 266237952 sectors > > sd2 at scsibus0 targ 2 lun 0: <AMI, Host drive #02, > SCSI2 0/direct > > fixed sd2: 19998MB, 512 bytes/sector, 40955904 sectors > > sd3 at scsibus0 targ 3 lun 0: <AMI, Host drive #03, > SCSI2 0/direct > > fixed sd3: 19998MB, 512 bytes/sector, 40955904 sectors > > scsibus1 at ami0: 16 targets > > ppb4 at pci3 dev 0 function 1 "NEC PCIE-PCIX" rev 0x06 > > pci5 at ppb4 bus 5 > > ppb5 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x02: msi > > pci6 at ppb5 bus 3 > > mskc0 at pci6 dev 0 function 0 "Marvell Yukon 88E8052" rev 0x21, > > Yukon-2 EC rev. A3 (0x2): apic 2 int 19 msk0 at mskc0 port A: > > address 00:1d:60:44:0c:fd eephy0 at msk0 phy 0: 88E1111 Gigabit > > PHY, rev. 2 ppb6 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev > > 0x02: msi pci7 at ppb6 bus 2 > > pciide0 at pci7 dev 0 function 0 "Marvell 88SE6121 SATA" rev 0xb1: > > DMA (unsupported), channel 0 configured to native-PCI, channel 1 > > configured to native-PCI pciide0: using apic 2 int 17 for > > native-PCI interrupt atapiscsi0 at pciide0 channel 0 drive 0 > > scsibus2 at atapiscsi0: 2 targets cd0 at scsibus2 targ 0 lun 0: > > <PIONEER, DVD-RW DVR-107D, 1.05> ATAPI 5/cdrom removable pciide0: > > channel 1 ignored (not responding; disabled or no drives?) uhci3 at > > pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 2 int 23 > > uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 2 > > int 19 uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: > > apic 2 int 18 ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" > > rev 0x02: apic 2 int 23 usb1 at ehci1: USB revision 2.0 uhub1 at > > usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb7 at pci0 dev 30 > > function 0 "Intel 82801BA Hub-to-PCI" rev 0x92 pci8 at ppb7 bus 8 > > "VIA VT6306 FireWire" rev 0xc0 at pci8 dev 7 function 0 not > > configured pcib0 at pci0 dev 31 function 0 "Intel 82801IR LPC" rev > > 0x02 pciide1 at pci0 dev 31 function 2 "Intel 82801I SATA" rev > > 0x02: DMA, channel 0 configured to native-PCI, channel 1 configured > > to native-PCI pciide1: using apic 2 int 22 for native-PCI interrupt > > ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: > > apic 2 int 18 iic0 at ichiic0 spdmem0 at iic0 addr 0x50: 1GB DDR2 > > SDRAM non-parity PC2-6400CL5 spdmem1 at iic0 addr 0x51: 1GB DDR2 > > SDRAM non-parity PC2-6400CL5 spdmem2 at iic0 addr 0x52: 1GB DDR2 > > SDRAM non-parity PC2-6400CL5 spdmem3 at iic0 addr 0x53: 1GB DDR2 > > SDRAM non-parity PC2-6400CL5 pciide2 at pci0 dev 31 function 5 > > "Intel 82801I SATA" rev 0x02: DMA, channel 0 wired to native-PCI, > > channel 1 wired to native-PCI pciide2: using apic 2 int 22 for > > native-PCI interrupt usb2 at uhci0: USB revision 1.0 uhub2 at usb2 > > "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci1: USB > > revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr > > 1 usb4 at uhci2: USB revision 1.0 > > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > usb5 at uhci3: USB revision 1.0 > > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > usb6 at uhci4: USB revision 1.0 > > uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > usb7 at uhci5: USB revision 1.0 > > uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > isa0 at pcib0 > > isadma0 at isa0 > > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > > pckbc0 at isa0 port 0x60/5 > > pckbd0 at pckbc0 (kbd slot) > > pckbc0: using irq 1 for kbd slot > > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > > pcppi0 at isa0 port 0x61 > > spkr0 at pcppi0 > > wbsio0 at isa0 port 0x2e/2: W83627DHG rev 0x23 > > lm1 at wbsio0 port 0x290/8: W83627DHG > > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 > > mtrr: Pentium Pro MTRR support > > uhub8 at uhub6 port 2 "Logitech G15 Keyboard Hub" rev 1.10/0.20 > > addr 2 uhidev0 at uhub8 port 1 configuration 1 interface 0 > > "Logitech G15 Gaming Keyboard" rev 2.00/1.00 addr 3 uhidev0: iclass > > 3/1 ukbd0 at uhidev0: 8 modifier keys, 6 key codes > > wskbd1 at ukbd0 mux 1 > > wskbd1: connecting to wsdisplay0 > > uhidev1 at uhub8 port 1 configuration 1 interface 1 "Logitech G15 > > Gaming Keyboard" rev 2.00/1.00 addr 3 uhidev1: iclass 3/0, 3 report > > ids uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0 > > uhid1 at uhidev1 reportid 2: input=7, output=0, feature=0 > > uhid2 at uhidev1 reportid 3: input=1, output=20, feature=1 > > uhidev2 at uhub8 port 4 configuration 1 interface 0 "Logitech G15 > > GamePanel LCD" rev 2.00/0.20 addr 4 uhidev2: iclass 3/0, 3 report > > ids uhid3 at uhidev2 reportid 1: input=6, output=0, feature=0 > > uhid4 at uhidev2 reportid 2: input=4, output=6, feature=3 > > uhid5 at uhidev2 reportid 3: input=0, output=991, feature=0 > > uhidev3 at uhub7 port 1 configuration 1 interface 0 "Razer Razer > > Copperhead Laser Mouse" rev 2.00/21.00 addr 2 uhidev3: iclass 3/0 > > ums0 at uhidev3: 7 buttons, Z dir > > wsmouse0 at ums0 mux 0 > > uhidev4 at uhub7 port 1 configuration 1 interface 1 "Razer Razer > > Copperhead Laser Mouse" rev 2.00/21.00 addr 2 uhidev4: iclass 3/1 > > ukbd1 at uhidev4: 8 modifier keys, 6 key codes > > wskbd2 at ukbd1 mux 1 > > wskbd2: connecting to wsdisplay0 > > vscsi0 at root > > scsibus3 at vscsi0: 256 targets > > softraid0 at root > > scsibus4 at softraid0: 256 targets > > root on sd2a (c33e43edb729ece8.a) swap on sd2b dump on sd2b > > WARNING: /mnt was not properly unmounted > > > > > > **************************************************************************** > > > > dmesg, same Pc, i386 install with 4096 MB > > > > > > **************************************************************************** > > > > > > OpenBSD 5.0 (GENERIC.MP) #59: Wed Aug 17 10:19:44 MDT 2011 > > dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP > > cpu0: Intel(R) Core(TM)2 Duo CPU E8200 @ 2.66GHz ("GenuineIntel" > > 686-class) 2.68 GHz cpu0: > > > > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,S SSE3,CX16,xTPR,PDCM,SSE4.1 > > real mem = 3488395264 (3326MB) avail mem = 3421270016 (3262MB) > > mainbus0 at root > > bios0 at mainbus0: AT/286+ BIOS, date 02/22/08, BIOS32 rev. 0 @ > > 0xf0010, SMBIOS rev. 2.4 @ 0xf06f0 (73 entries) bios0: vendor > > American Megatrends Inc. version "1004" date 02/22/2008 bios0: > > ASUSTeK Computer INC. P5K WS acpi0 at bios0: rev 2 > > acpi0: sleep states S0 S1 S3 S4 S5 > > acpi0: tables DSDT FACP APIC MCFG OEMB HPET > > acpi0: wakeup devices P0P2(S4) P0P1(S4) PS2K(S4) UAR1(S4) EUSB(S4) > > USBE(S4) P0P4(S4) P0P5(S4) P0P6(S4) P0P7(S4) P0P8(S4) P0P9(S4) > > GBEC(S4) USB0(S4) USB1(S4) USB2(S4) USB3(S4) USB4(S4) USB5(S4) > > USB6(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at > > acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot > > processor) cpu0: apic clock running at 333MHz cpu1 at mainbus0: > > apid 1 (application processor) cpu1: Intel(R) Core(TM)2 Duo CPU > > E8200 @ 2.66GHz ("GenuineIntel" 686-class) 2.68 GHz cpu1: > > > > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,S SSE3,CX16,xTPR,PDCM,SSE4.1 > > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > > ioapic1 at mainbus0: apid 3 pa 0xfec10000, version ff, 256 pins > > ioapic1: misconfigured as apic 15, can't remap to apid 3 acpimcfg0 > > at acpi0 addr 0xe0000000, bus 0-255 acpihpet0 at acpi0: 14318179 Hz > > acpiprt0 at acpi0: bus 0 (PCI0) > > acpiprt1 at acpi0: bus 1 (P0P2) > > acpiprt2 at acpi0: bus 8 (P0P1) > > acpiprt3 at acpi0: bus 7 (P0P4) > > acpiprt4 at acpi0: bus -1 (P0P5) > > acpiprt5 at acpi0: bus 4 (P0P6) > > acpiprt6 at acpi0: bus 6 (PXHA) > > acpiprt7 at acpi0: bus 3 (P0P7) > > acpiprt8 at acpi0: bus -1 (P0P8) > > acpiprt9 at acpi0: bus 2 (P0P9) > > acpicpu0 at acpi0 > > acpicpu1 at acpi0 > > aibs0 at acpi0: RTMP RVLT RFAN GGRP GITM SITM > > acpibtn0 at acpi0: PWRB > > bios0: ROM list: 0xc0000/0xd200 0xcd800/0x3400 0xd1000/0x2400 > > cpu0: unknown Enhanced SpeedStep CPU, msr 0x061a082006000820 > > cpu0: using only highest and lowest power states > > cpu0: Enhanced SpeedStep 2672 MHz: speeds: 2667, 2000 MHz > > pci0 at mainbus0 bus 0: configuration mode 1 (bios) > > pchb0 at pci0 dev 0 function 0 "Intel 82G33 Host" rev 0x02 > > ppb0 at pci0 dev 1 function 0 "Intel 82G33 PCIE" rev 0x02: apic 2 > > int 16 pci1 at ppb0 bus 1 > > vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 8800 GTS" rev 0xa2 > > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > > uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 2 > > int 16 uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: > > apic 2 int 21 uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" > > rev 0x02: apic 2 int 18 ehci0 at pci0 dev 26 function 7 "Intel > > 82801I USB" rev 0x02: apic 2 int 18 usb0 at ehci0: USB revision 2.0 > > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > > azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x02: > > msi azalia0: codecs: Realtek ALC888 > > audio0 at azalia0 > > ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: apic 2 > > int 17 pci2 at ppb1 bus 7 > > ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x02: apic 2 > > int 18 pci3 at ppb2 bus 4 > > ppb3 at pci3 dev 0 function 0 "NEC PCIE-PCIX" rev 0x06 > > pci4 at ppb3 bus 6 > > ami0 at pci4 dev 1 function 0 "Symbios Logic MegaRAID" rev 0x01: > > apic 2 int 19 ami0: Intel RAID SRCS16, 32b, FW 713S, BIOS vG401, > > 64MB RAM ami0: 1 channels, 0 FC loops, 4 logical drives > > scsibus0 at ami0: 40 targets > > sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct > > fixed sd0: 39999MB, 512 bytes/sector, 81917952 sectors > > sd1 at scsibus0 targ 1 lun 0: <AMI, Host drive #01, > SCSI2 0/direct > > fixed sd1: 129999MB, 512 bytes/sector, 266237952 sectors > > sd2 at scsibus0 targ 2 lun 0: <AMI, Host drive #02, > SCSI2 0/direct > > fixed sd2: 19998MB, 512 bytes/sector, 40955904 sectors > > sd3 at scsibus0 targ 3 lun 0: <AMI, Host drive #03, > SCSI2 0/direct > > fixed sd3: 19998MB, 512 bytes/sector, 40955904 sectors > > scsibus1 at ami0: 16 targets > > ppb4 at pci3 dev 0 function 1 "NEC PCIE-PCIX" rev 0x06 > > pci5 at ppb4 bus 5 > > ppb5 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x02: apic 2 > > int 19 pci6 at ppb5 bus 3 > > mskc0 at pci6 dev 0 function 0 "Marvell Yukon 88E8052" rev 0x21, > > Yukon-2 EC rev. A3 (0x2): apic 2 int 19 msk0 at mskc0 port A: > > address 00:1d:60:44:0c:fd eephy0 at msk0 phy 0: 88E1111 Gigabit > > PHY, rev. 2 ppb6 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev > > 0x02: apic 2 int 16 pci7 at ppb6 bus 2 > > pciide0 at pci7 dev 0 function 0 "Marvell 88SE6121 SATA" rev 0xb1: > > DMA (unsupported), channel 0 configured to native-PCI, channel 1 > > configured to native-PCI pciide0: using apic 2 int 17 for > > native-PCI interrupt atapiscsi0 at pciide0 channel 0 drive 0 > > scsibus2 at atapiscsi0: 2 targets cd0 at scsibus2 targ 0 lun 0: > > <PIONEER, DVD-RW DVR-107D, 1.05> ATAPI 5/cdrom removable pciide0: > > channel 1 ignored (not responding; disabled or no drives?) uhci3 at > > pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 2 int 23 > > uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 2 > > int 19 uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: > > apic 2 int 18 ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" > > rev 0x02: apic 2 int 23 usb1 at ehci1: USB revision 2.0 uhub1 at > > usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb7 at pci0 dev 30 > > function 0 "Intel 82801BA Hub-to-PCI" rev 0x92 pci8 at ppb7 bus 8 > > "VIA VT6306 FireWire" rev 0xc0 at pci8 dev 7 function 0 not > > configured ichpcib0 at pci0 dev 31 function 0 "Intel 82801IR LPC" > > rev 0x02: PM disabled pciide1 at pci0 dev 31 function 2 "Intel > > 82801I SATA" rev 0x02: DMA, channel 0 configured to native-PCI, > > channel 1 configured to native-PCI pciide1: using apic 2 int 22 for > > native-PCI interrupt ichiic0 at pci0 dev 31 function 3 "Intel > > 82801I SMBus" rev 0x02: apic 2 int 18 iic0 at ichiic0 spdmem0 at > > iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5 spdmem1 at > > iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-6400CL5 spdmem2 at > > iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-6400CL5 spdmem3 at > > iic0 addr 0x53: 1GB DDR2 SDRAM non-parity PC2-6400CL5 pciide2 at > > pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x02: DMA, channel 0 > > wired to native-PCI, channel 1 wired to native-PCI pciide2: using > > apic 2 int 22 for native-PCI interrupt usb2 at uhci0: USB revision > > 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 > > at uhci1: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev > > 1.00/1.00 addr 1 usb4 at uhci2: USB revision 1.0 > > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > usb5 at uhci3: USB revision 1.0 > > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > usb6 at uhci4: USB revision 1.0 > > uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > usb7 at uhci5: USB revision 1.0 > > uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > isa0 at ichpcib0 > > isadma0 at isa0 > > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > > pckbc0 at isa0 port 0x60/5 > > pckbd0 at pckbc0 (kbd slot) > > pckbc0: using irq 1 for kbd slot > > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > > pcppi0 at isa0 port 0x61 > > spkr0 at pcppi0 > > wbsio0 at isa0 port 0x2e/2: W83627DHG rev 0x23 > > lm1 at wbsio0 port 0x290/8: W83627DHG > > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 > > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 > > mtrr: Pentium Pro MTRR support > > uhub8 at uhub6 port 2 "Logitech G15 Keyboard Hub" rev 1.10/0.20 > > addr 2 uhidev0 at uhub8 port 1 configuration 1 interface 0 > > "Logitech G15 Gaming Keyboard" rev 2.00/1.00 addr 3 uhidev0: iclass > > 3/1 ukbd0 at uhidev0: 8 modifier keys, 6 key codes > > wskbd1 at ukbd0 mux 1 > > wskbd1: connecting to wsdisplay0 > > uhidev1 at uhub8 port 1 configuration 1 interface 1 "Logitech G15 > > Gaming Keyboard" rev 2.00/1.00 addr 3 uhidev1: iclass 3/0, 3 report > > ids uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0 > > uhid1 at uhidev1 reportid 2: input=7, output=0, feature=0 > > uhid2 at uhidev1 reportid 3: input=1, output=20, feature=1 > > uhidev2 at uhub8 port 4 configuration 1 interface 0 "Logitech G15 > > GamePanel LCD" rev 2.00/0.20 addr 4 uhidev2: iclass 3/0, 3 report > > ids uhid3 at uhidev2 reportid 1: input=6, output=0, feature=0 > > uhid4 at uhidev2 reportid 2: input=4, output=6, feature=3 > > uhid5 at uhidev2 reportid 3: input=0, output=991, feature=0 > > uhidev3 at uhub7 port 1 configuration 1 interface 0 "Razer Razer > > Copperhead Laser Mouse" rev 2.00/21.00 addr 2 uhidev3: iclass 3/0 > > ums0 at uhidev3: 7 buttons, Z dir > > wsmouse0 at ums0 mux 0 > > uhidev4 at uhub7 port 1 configuration 1 interface 1 "Razer Razer > > Copperhead Laser Mouse" rev 2.00/21.00 addr 2 uhidev4: iclass 3/1 > > ukbd1 at uhidev4: 8 modifier keys, 6 key codes > > wskbd2 at ukbd1 mux 1 > > wskbd2: connecting to wsdisplay0 > > vscsi0 at root > > scsibus3 at vscsi0: 256 targets > > softraid0 at root > > scsibus4 at softraid0: 256 targets > > root on sd2a (92e2252ceb7c8b90.a) swap on sd2b dump on sd2b > > > > ************************************************************************ > > > > dmesg, same Pc amd64 install with 3072 MB > > > > ************************************************************************ > > > > OpenBSD 5.0 (RAMDISK_CD) #53: Wed Aug 17 10:17:43 MDT 2011 > > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD > > real mem = 3219390464 (3070MB) > > avail mem = 3121913856 (2977MB) > > mainbus0 at root > > bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf06f0 (73 entries) > > bios0: vendor American Megatrends Inc. version "1004" date > > 02/22/2008 bios0: ASUSTeK Computer INC. P5K WS > > acpi0 at bios0: rev 2 > > acpi0: sleep states S0 S1 S3 S4 S5 > > acpi0: tables DSDT FACP APIC MCFG OEMB HPET > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > > cpu0 at mainbus0: apid 0 (boot processor) > > cpu0: Intel(R) Core(TM)2 Duo CPU E8200 @ 2.66GHz, 2671.98 MHz > > cpu0: > > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,S SSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG > > cpu0: 6MB 64b/line 16-way L2 cache cpu0: apic clock running at > > 333MHz cpu at mainbus0: not configured > > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > > ioapic1 at mainbus0: apid 3 pa 0xfec10000, version ff, 256 pins > > ioapic1: misconfigured as apic 15, can't remap to apid 3 > > acpiprt0 at acpi0: bus 0 (PCI0) > > acpiprt1 at acpi0: bus 1 (P0P2) > > acpiprt2 at acpi0: bus 8 (P0P1) > > acpiprt3 at acpi0: bus 7 (P0P4) > > acpiprt4 at acpi0: bus -1 (P0P5) > > acpiprt5 at acpi0: bus 4 (P0P6) > > acpiprt6 at acpi0: bus 6 (PXHA) > > acpiprt7 at acpi0: bus 3 (P0P7) > > acpiprt8 at acpi0: bus -1 (P0P8) > > acpiprt9 at acpi0: bus 2 (P0P9) > > pci0 at mainbus0 bus 0 > > pchb0 at pci0 dev 0 function 0 "Intel 82G33 Host" rev 0x02 > > ppb0 at pci0 dev 1 function 0 "Intel 82G33 PCIE" rev 0x02: msi > > pci1 at ppb0 bus 1 > > vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 8800 GTS" rev 0xa2 > > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > > uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 2 > > int 16 uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: > > apic 2 int 21 uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" > > rev 0x02: apic 2 int 18 ehci0 at pci0 dev 26 function 7 "Intel > > 82801I USB" rev 0x02: apic 2 int 18 usb0 at ehci0: USB revision 2.0 > > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > > "Intel 82801I HD Audio" rev 0x02 at pci0 dev 27 function 0 not > > configured ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev > > 0x02: msi pci2 at ppb1 bus 7 > > ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x02: msi > > pci3 at ppb2 bus 4 > > ppb3 at pci3 dev 0 function 0 "NEC PCIE-PCIX" rev 0x06 > > pci4 at ppb3 bus 6 > > ami0 at pci4 dev 1 function 0 "Symbios Logic MegaRAID" rev 0x01: > > apic 2 int 19 ami0: Intel RAID SRCS16, 32b, FW 713S, BIOS vG401, > > 64MB RAM ami0: 1 channels, 0 FC loops, 4 logical drives > > scsibus0 at ami0: 40 targets > > sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct > > fixed sd0: 39999MB, 512 bytes/sector, 81917952 sectors > > sd1 at scsibus0 targ 1 lun 0: <AMI, Host drive #01, > SCSI2 0/direct > > fixed sd1: 129999MB, 512 bytes/sector, 266237952 sectors > > sd2 at scsibus0 targ 2 lun 0: <AMI, Host drive #02, > SCSI2 0/direct > > fixed sd2: 19998MB, 512 bytes/sector, 40955904 sectors > > sd3 at scsibus0 targ 3 lun 0: <AMI, Host drive #03, > SCSI2 0/direct > > fixed sd3: 19998MB, 512 bytes/sector, 40955904 sectors > > scsibus1 at ami0: 16 targets > > ppb4 at pci3 dev 0 function 1 "NEC PCIE-PCIX" rev 0x06 > > pci5 at ppb4 bus 5 > > ppb5 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x02: msi > > pci6 at ppb5 bus 3 > > mskc0 at pci6 dev 0 function 0 "Marvell Yukon 88E8052" rev 0x21, > > Yukon-2 EC rev. A3 (0x2): apic 2 int 19 msk0 at mskc0 port A: > > address 00:1d:60:44:0c:fd eephy0 at msk0 phy 0: 88E1111 Gigabit > > PHY, rev. 2 ppb6 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev > > 0x02: msi pci7 at ppb6 bus 2 > > pciide0 at pci7 dev 0 function 0 "Marvell 88SE6121 SATA" rev 0xb1: > > DMA (unsupported), channel 0 configured to native-PCI, channel 1 > > configured to native-PCI pciide0: using apic 2 int 17 for > > native-PCI interrupt atapiscsi0 at pciide0 channel 0 drive 0 > > scsibus2 at atapiscsi0: 2 targets cd0 at scsibus2 targ 0 lun 0: > > <PIONEER, DVD-RW DVR-107D, 1.05> ATAPI 5/cdrom removable pciide0: > > channel 1 ignored (not responding; disabled or no drives?) uhci3 at > > pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 2 int 23 > > uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 2 > > int 19 uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: > > apic 2 int 18 ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" > > rev 0x02: apic 2 int 23 usb1 at ehci1: USB revision 2.0 uhub1 at > > usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb7 at pci0 dev 30 > > function 0 "Intel 82801BA Hub-to-PCI" rev 0x92 pci8 at ppb7 bus 8 > > "VIA VT6306 FireWire" rev 0xc0 at pci8 dev 7 function 0 not > > configured "Intel 82801IR LPC" rev 0x02 at pci0 dev 31 function 0 > > not configured pciide1 at pci0 dev 31 function 2 "Intel 82801I > > SATA" rev 0x02: DMA, channel 0 configured to native-PCI, channel 1 > > configured to native-PCI pciide1: using apic 2 int 22 for > > native-PCI interrupt "Intel 82801I SMBus" rev 0x02 at pci0 dev 31 > > function 3 not configured pciide2 at pci0 dev 31 function 5 "Intel > > 82801I SATA" rev 0x02: DMA, channel 0 wired to native-PCI, channel > > 1 wired to native-PCI pciide2: using apic 2 int 22 for native-PCI > > interrupt usb2 at uhci0: USB revision 1.0 uhub2 at usb2 "Intel UHCI > > root hub" rev 1.00/1.00 addr 1 usb3 at uhci1: USB revision 1.0 > > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb4 at > > uhci2: USB revision 1.0 uhub4 at usb4 "Intel UHCI root hub" rev > > 1.00/1.00 addr 1 usb5 at uhci3: USB revision 1.0 > > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > usb6 at uhci4: USB revision 1.0 > > uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > usb7 at uhci5: USB revision 1.0 > > uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > isa0 at mainbus0 > > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > > pckbc0 at isa0 port 0x60/5 > > pckbd0 at pckbc0 (kbd slot) > > pckbc0: using irq 1 for kbd slot > > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > > uhub8 at uhub6 port 2 "vendor 0x046d G15 Keyboard Hub" rev 1.10/0.20 > > addr 2 uhidev0 at uhub8 port 1 configuration 1 interface 0 "vendor > > 0x046d G15 Gaming Keyboard" rev 2.00/1.00 addr 3 uhidev0: iclass 3/1 > > ukbd0 at uhidev0 > > wskbd1 at ukbd0 mux 1 > > wskbd1: connecting to wsdisplay0 > > uhidev1 at uhub8 port 1 configuration 1 interface 1 "vendor 0x046d > > G15 Gaming Keyboard" rev 2.00/1.00 addr 3 uhidev1: iclass 3/0, 3 > > report ids uhid at uhidev1 reportid 1 not configured > > uhid at uhidev1 reportid 2 not configured > > uhid at uhidev1 reportid 3 not configured > > uhidev2 at uhub8 port 4 configuration 1 interface 0 "vendor 0x046d > > G15 GamePanel LCD" rev 2.00/0.20 addr 4 uhidev2: iclass 3/0, 3 > > report ids uhid at uhidev2 reportid 1 not configured > > uhid at uhidev2 reportid 2 not configured > > uhid at uhidev2 reportid 3 not configured > > uhidev3 at uhub7 port 1 configuration 1 interface 0 "Razer Razer > > Copperhead Laser Mouse" rev 2.00/21.00 addr 2 uhidev3: iclass 3/0 > > uhid at uhidev3 not configured > > uhidev4 at uhub7 port 1 configuration 1 interface 1 "Razer Razer > > Copperhead Laser Mouse" rev 2.00/21.00 addr 2 uhidev4: iclass 3/1 > > ukbd1 at uhidev4 > > wskbd2 at ukbd1 mux 1 > > wskbd2: connecting to wsdisplay0 > > softraid0 at root > > scsibus3 at softraid0: 256 targets > > root on rd0a swap on rd0b dump on rd0b > > syncing disks... > > OpenBSD 5.0 (GENERIC.MP) #63: Wed Aug 17 10:14:30 MDT 2011 > > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > > real mem = 3219390464 (3070MB) > > avail mem = 3119632384 (2975MB) > > mainbus0 at root > > bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf06f0 (73 entries) > > bios0: vendor American Megatrends Inc. version "1004" date > > 02/22/2008 bios0: ASUSTeK Computer INC. P5K WS > > acpi0 at bios0: rev 2 > > acpi0: sleep states S0 S1 S3 S4 S5 > > acpi0: tables DSDT FACP APIC MCFG OEMB HPET > > acpi0: wakeup devices P0P2(S4) P0P1(S4) PS2K(S4) UAR1(S4) EUSB(S4) > > USBE(S4) P0P4(S4) P0P5(S4) P0P6(S4) P0P7(S4) P0P8(S4) P0P9(S4) > > GBEC(S4) USB0(S4) USB1(S4) USB2(S4) USB3(S4) USB4(S4) USB5(S4) > > USB6(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at > > acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot > > processor) cpu0: Intel(R) Core(TM)2 Duo CPU E8200 @ 2.66GHz, > > 2671.95 MHz cpu0: > > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,S SSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG > > cpu0: 6MB 64b/line 16-way L2 cache cpu0: apic clock running at > > 333MHz cpu1 at mainbus0: apid 1 (application processor) > > cpu1: Intel(R) Core(TM)2 Duo CPU E8200 @ 2.66GHz, 2671.60 MHz > > cpu1: > > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,S SSE3,CX16,xTPR,PDCM,SSE4.1,NXE,LONG > > cpu1: 6MB 64b/line 16-way L2 cache ioapic0 at mainbus0: apid 2 pa > > 0xfec00000, version 20, 24 pins ioapic1 at mainbus0: apid 3 pa > > 0xfec10000, version ff, 256 pins ioapic1: misconfigured as apic 15, > > can't remap to apid 3 acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 > > acpihpet0 at acpi0: 14318179 Hz > > acpiprt0 at acpi0: bus 0 (PCI0) > > acpiprt1 at acpi0: bus 1 (P0P2) > > acpiprt2 at acpi0: bus 8 (P0P1) > > acpiprt3 at acpi0: bus 7 (P0P4) > > acpiprt4 at acpi0: bus -1 (P0P5) > > acpiprt5 at acpi0: bus 4 (P0P6) > > acpiprt6 at acpi0: bus 6 (PXHA) > > acpiprt7 at acpi0: bus 3 (P0P7) > > acpiprt8 at acpi0: bus -1 (P0P8) > > acpiprt9 at acpi0: bus 2 (P0P9) > > acpicpu0 at acpi0 > > acpicpu1 at acpi0 > > aibs0 at acpi0: RTMP RVLT RFAN GGRP GITM SITM > > acpibtn0 at acpi0: PWRB > > cpu0: unknown Enhanced SpeedStep CPU, msr 0x061a082006000820 > > cpu0: using only highest and lowest power states > > cpu0: Enhanced SpeedStep 2671 MHz: speeds: 2667, 2000 MHz > > pci0 at mainbus0 bus 0 > > pchb0 at pci0 dev 0 function 0 "Intel 82G33 Host" rev 0x02 > > ppb0 at pci0 dev 1 function 0 "Intel 82G33 PCIE" rev 0x02: msi > > pci1 at ppb0 bus 1 > > vga1 at pci1 dev 0 function 0 "NVIDIA GeForce 8800 GTS" rev 0xa2 > > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > > uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 2 > > int 16 uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: > > apic 2 int 21 uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" > > rev 0x02: apic 2 int 18 ehci0 at pci0 dev 26 function 7 "Intel > > 82801I USB" rev 0x02: apic 2 int 18 usb0 at ehci0: USB revision 2.0 > > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > > azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x02: > > msi azalia0: codecs: Realtek ALC888 > > audio0 at azalia0 > > ppb1 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: msi > > pci2 at ppb1 bus 7 > > ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x02: msi > > pci3 at ppb2 bus 4 > > ppb3 at pci3 dev 0 function 0 "NEC PCIE-PCIX" rev 0x06 > > pci4 at ppb3 bus 6 > > ami0 at pci4 dev 1 function 0 "Symbios Logic MegaRAID" rev 0x01: > > apic 2 int 19 ami0: Intel RAID SRCS16, 32b, FW 713S, BIOS vG401, > > 64MB RAM ami0: 1 channels, 0 FC loops, 4 logical drives > > scsibus0 at ami0: 40 targets > > sd0 at scsibus0 targ 0 lun 0: <AMI, Host drive #00, > SCSI2 0/direct > > fixed sd0: 39999MB, 512 bytes/sector, 81917952 sectors > > sd1 at scsibus0 targ 1 lun 0: <AMI, Host drive #01, > SCSI2 0/direct > > fixed sd1: 129999MB, 512 bytes/sector, 266237952 sectors > > sd2 at scsibus0 targ 2 lun 0: <AMI, Host drive #02, > SCSI2 0/direct > > fixed sd2: 19998MB, 512 bytes/sector, 40955904 sectors > > sd3 at scsibus0 targ 3 lun 0: <AMI, Host drive #03, > SCSI2 0/direct > > fixed sd3: 19998MB, 512 bytes/sector, 40955904 sectors > > scsibus1 at ami0: 16 targets > > ppb4 at pci3 dev 0 function 1 "NEC PCIE-PCIX" rev 0x06 > > pci5 at ppb4 bus 5 > > ppb5 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x02: msi > > pci6 at ppb5 bus 3 > > mskc0 at pci6 dev 0 function 0 "Marvell Yukon 88E8052" rev 0x21, > > Yukon-2 EC rev. A3 (0x2): apic 2 int 19 msk0 at mskc0 port A: > > address 00:1d:60:44:0c:fd eephy0 at msk0 phy 0: 88E1111 Gigabit > > PHY, rev. 2 ppb6 at pci0 dev 28 function 5 "Intel 82801I PCIE" rev > > 0x02: msi pci7 at ppb6 bus 2 > > pciide0 at pci7 dev 0 function 0 "Marvell 88SE6121 SATA" rev 0xb1: > > DMA (unsupported), channel 0 configured to native-PCI, channel 1 > > configured to native-PCI pciide0: using apic 2 int 17 for > > native-PCI interrupt atapiscsi0 at pciide0 channel 0 drive 0 > > scsibus2 at atapiscsi0: 2 targets cd0 at scsibus2 targ 0 lun 0: > > <PIONEER, DVD-RW DVR-107D, 1.05> ATAPI 5/cdrom removable pciide0: > > channel 1 ignored (not responding; disabled or no drives?) uhci3 at > > pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 2 int 23 > > uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 2 > > int 19 uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: > > apic 2 int 18 ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" > > rev 0x02: apic 2 int 23 usb1 at ehci1: USB revision 2.0 uhub1 at > > usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 ppb7 at pci0 dev 30 > > function 0 "Intel 82801BA Hub-to-PCI" rev 0x92 pci8 at ppb7 bus 8 > > "VIA VT6306 FireWire" rev 0xc0 at pci8 dev 7 function 0 not > > configured pcib0 at pci0 dev 31 function 0 "Intel 82801IR LPC" rev > > 0x02 pciide1 at pci0 dev 31 function 2 "Intel 82801I SATA" rev > > 0x02: DMA, channel 0 configured to native-PCI, channel 1 configured > > to native-PCI pciide1: using apic 2 int 22 for native-PCI interrupt > > ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: > > apic 2 int 18 iic0 at ichiic0 spdmem0 at iic0 addr 0x51: 1GB DDR2 > > SDRAM non-parity PC2-6400CL5 spdmem1 at iic0 addr 0x52: 1GB DDR2 > > SDRAM non-parity PC2-6400CL5 spdmem2 at iic0 addr 0x53: 1GB DDR2 > > SDRAM non-parity PC2-6400CL5 pciide2 at pci0 dev 31 function 5 > > "Intel 82801I SATA" rev 0x02: DMA, channel 0 wired to native-PCI, > > channel 1 wired to native-PCI pciide2: using apic 2 int 22 for > > native-PCI interrupt usb2 at uhci0: USB revision 1.0 uhub2 at usb2 > > "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci1: USB > > revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr > > 1 usb4 at uhci2: USB revision 1.0 > > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > usb5 at uhci3: USB revision 1.0 > > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > usb6 at uhci4: USB revision 1.0 > > uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > usb7 at uhci5: USB revision 1.0 > > uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > > isa0 at pcib0 > > isadma0 at isa0 > > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > > pckbc0 at isa0 port 0x60/5 > > pckbd0 at pckbc0 (kbd slot) > > pckbc0: using irq 1 for kbd slot > > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > > pcppi0 at isa0 port 0x61 > > spkr0 at pcppi0 > > wbsio0 at isa0 port 0x2e/2: W83627DHG rev 0x23 > > lm1 at wbsio0 port 0x290/8: W83627DHG > > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 > > mtrr: Pentium Pro MTRR support > > uhub8 at uhub6 port 2 "Logitech G15 Keyboard Hub" rev 1.10/0.20 > > addr 2 uhidev0 at uhub8 port 1 configuration 1 interface 0 > > "Logitech G15 Gaming Keyboard" rev 2.00/1.00 addr 3 uhidev0: iclass > > 3/1 ukbd0 at uhidev0: 8 modifier keys, 6 key codes > > wskbd1 at ukbd0 mux 1 > > wskbd1: connecting to wsdisplay0 > > uhidev1 at uhub8 port 1 configuration 1 interface 1 "Logitech G15 > > Gaming Keyboard" rev 2.00/1.00 addr 3 uhidev1: iclass 3/0, 3 report > > ids uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0 > > uhid1 at uhidev1 reportid 2: input=7, output=0, feature=0 > > uhid2 at uhidev1 reportid 3: input=1, output=20, feature=1 > > uhidev2 at uhub8 port 4 configuration 1 interface 0 "Logitech G15 > > GamePanel LCD" rev 2.00/0.20 addr 4 uhidev2: iclass 3/0, 3 report > > ids uhid3 at uhidev2 reportid 1: input=6, output=0, feature=0 > > uhid4 at uhidev2 reportid 2: input=4, output=6, feature=3 > > uhid5 at uhidev2 reportid 3: input=0, output=991, feature=0 > > uhidev3 at uhub7 port 1 configuration 1 interface 0 "Razer Razer > > Copperhead Laser Mouse" rev 2.00/21.00 addr 2 uhidev3: iclass 3/0 > > ums0 at uhidev3: 7 buttons, Z dir > > wsmouse0 at ums0 mux 0 > > uhidev4 at uhub7 port 1 configuration 1 interface 1 "Razer Razer > > Copperhead Laser Mouse" rev 2.00/21.00 addr 2uhidev4: iclass 3/1 > > ukbd1 at uhidev4: 8 modifier keys, 6 key codes > > wskbd2 at ukbd1 mux 1 > > wskbd2: connecting to wsdisplay0 > > vscsi0 at root > > scsibus3 at vscsi0: 256 targets > > softraid0 at root > > scsibus4 at softraid0: 256 targets > > root on sd2a (9c0293fac0ad6951.a) swap on sd2b dump on sd2b