Hi, Is it possible to have the diff file to apply to 4.9 kernel source ? I need OpenBSD 4.9 running on the machine.
I have a Kernel panic on OpenBSD 4.9 with an Apple mac mini (new generation , Model : A1347 ; Core i5, thunderbolt Technology, HD 500Go) At installation using 4.9 RELEASE : It takes a long time to format slides. At the reboot : i have a kernel panic just after "starting network" So i tried to use 5.0 RELEASE. This time, it formats quickly. But it is the same way : kernel panic when it starts the network. a "show panic" at the ddb prompt: mii_phy_setmedia Here is the 'ps' message : http://i43.tinypic.com/mkufyo.jpg Here is the 'trace' message : http://i40.tinypic.com/25syfxf.jpg here is the dmesg issue : boot on bsd.rd : OpenBSD 5.0 (RAMDISK_CD) #36: Wed Aug 17 10:27:31 MDT 2011 dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/RAMDISK_CD RTC BIOS diagnostic error a9 cpu0: Intel(R) Core(TM) i5-2415M CPU @ 2.30GHz ("GenuineIntel" 686-class) 2.30 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,XSAVE,AVX real mem = 2047619072 (1952MB) avail mem = 2007117824 (1914MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 07/29/05, SMBIOS rev. 2.4 @ 0xe0000 (61 entries) bios0: vendor Apple Inc. version "MM51.88Z.0075.B00.1106271442" date 06/27/2011 bios0: Apple Inc. Macmini5,1 acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP HPET APIC SBST ECDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT MCFG SSDT SSDT SSDT acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 99MHz cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 2 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (P0P2) acpiprt2 at acpi0: bus 5 (PEG1) acpiprt3 at acpi0: bus 2 (RP01) acpiprt4 at acpi0: bus -1 (RP02) acpiprt5 at acpi0: bus 3 (RP03) bios0: ROM list: 0xc0000/0xee00 memory map conflict 0xe00f8000/0x1000 memory map conflict 0xfed1c000/0x4000 memory map conflict 0xffed0000/0x30000 pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09 ppb0 at pci0 dev 1 function 0 "Intel Core 2G PCIE" rev 0x09: apic 2 int 16 pci1 at ppb0 bus 1 ppb1 at pci0 dev 1 function 1 "Intel Core 2G PCIE" rev 0x09: apic 2 int 16 pci2 at ppb1 bus 5 ppb2 at pci2 dev 0 function 0 vendor "Intel", unknown product 0x1513 rev 0x00 pci3 at ppb2 bus 6 ppb3 at pci3 dev 0 function 0 vendor "Intel", unknown product 0x1513 rev 0x00: apic 2 int 17 pci4 at ppb3 bus 7 vendor "Intel", unknown product 0x1513 (class system subclass miscellaneous, rev 0x00) at pci4 dev 0 function 0 not configured ppb4 at pci3 dev 3 function 0 vendor "Intel", unknown product 0x1513 rev 0x00: apic 2 int 16 pci5 at ppb4 bus 8 ppb5 at pci3 dev 4 function 0 vendor "Intel", unknown product 0x1513 rev 0x00: apic 2 int 17 pci6 at ppb5 bus 9 ppb6 at pci3 dev 5 function 0 vendor "Intel", unknown product 0x1513 rev 0x00: apic 2 int 18 pci7 at ppb6 bus 58 ppb7 at pci3 dev 6 function 0 vendor "Intel", unknown product 0x1513 rev 0x00: apic 2 int 19 pci8 at ppb7 bus 107 vga1 at pci0 dev 2 function 0 "Intel GT2+ Video" rev 0x09 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) "Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured uhci0 at pci0 dev 26 function 0 vendor "Intel", unknown product 0x1c2c rev 0x05: apic 2 int 21 ehci0 at pci0 dev 26 function 7 "Intel 6 Series USB" rev 0x05: apic 2 int 23 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 "Intel 6 Series HD Audio" rev 0x05 at pci0 dev 27 function 0 not configured ppb8 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb5: apic 2 int 16 pci9 at ppb8 bus 2 bge0 at pci9 dev 0 function 0 "Broadcom BCM57765" rev 0x10, unknown BCM57765 (0x57785100): apic 2 int 16, address 3c:07:54:0c:6b:b7 ukphy0 at bge0 phy 1: Generic IEEE 802.3u media interface, rev. 4: OUI 0x00d897, model 0x0024 "Broadcom SD Host Controller" rev 0x10 at pci9 dev 0 function 1 not configured ppb9 at pci0 dev 28 function 2 "Intel 6 Series PCIE" rev 0xb5: apic 2 int 18 pci10 at ppb9 bus 3 ppb10 at pci10 dev 0 function 0 vendor "TI", unknown product 0x823e rev 0x01 pci11 at ppb10 bus 4 vendor "TI", unknown product 0x823f (class serial bus subclass Firewire, rev 0x01) at pci11 dev 0 function 0 not configured uhci1 at pci0 dev 29 function 0 vendor "Intel", unknown product 0x1c27 rev 0x05: apic 2 int 19 ehci1 at pci0 dev 29 function 7 "Intel 6 Series USB" rev 0x05: apic 2 int 22 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1 pcib0 at pci0 dev 31 function 0 "Intel HM65 LPC" rev 0x05 pciide0 at pci0 dev 31 function 2 "Intel 6 Series SATA" rev 0x05: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide0: using apic 2 int 19 for native-PCI interrupt wd0 at pciide0 channel 0 drive 0: wd0: 16-sector PIO, LBA48, 476940MB, 976773168 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6 "Intel 6 Series SMBus" rev 0x05 at pci0 dev 31 function 3 not configured usb2 at uhci0: USB revision 1.0 uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 usb3 at uhci1: USB revision 1.0 uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 uhub4 at uhub0 port 1 "vendor 0x0424 product 0x2513" rev 2.00/b.b3 addr 2 uhub5 at uhub1 port 1 "vendor 0x0424 product 0x2513" rev 2.00/b.b3 addr 2 uhidev0 at uhub5 port 1 configuration 1 interface 0 "Apple Computer, Inc. IR Receiver" rev 2.00/0.16 addr 3 uhidev0: iclass 3/0, 38 report ids uhid at uhidev0 reportid 36 not configured uhid at uhidev0 reportid 37 not configured uhid at uhidev0 reportid 38 not configured uhidev1 at uhub5 port 3 configuration 1 interface 0 "BTC USB Multimedia Keyboard" rev 1.10/1.00 addr 4 uhidev1: iclass 3/1 ukbd0 at uhidev1 wskbd0 at ukbd0: console keyboard, using wsdisplay0 uhidev2 at uhub5 port 3 configuration 1 interface 1 "BTC USB Multimedia Keyboard" rev 1.10/1.00 addr 4 uhidev2: iclass 3/0, 3 report ids uhid at uhidev2 reportid 1 not configured uhid at uhidev2 reportid 2 not configured uhid at uhidev2 reportid 3 not configured softraid0 at root scsibus0 at softraid0: 256 targets root on rd0a swap on rd0b dump on rd0b umass0 at uhub5 port 2 configuration 1 interface 0 "JetFlash Mass Storage Device" rev 2.00/11.00 addr 5 umass0: using SCSI over Bulk-Only scsibus1 at umass0: 2 targets, initiator 0 sd0 at scsibus1 targ 1 lun 0: SCSI0 0/direct removable serial.85641000IT7IZ4KWB0DL sd0: 7728MB, 512 bytes/sector, 15826944 sectors Thank you very much for your help, your good work. Regards, Wesley MOUEDINE ASSABY www.mouedine.net
