Hi,
I can't use the Trendnet Ethernet USB.
The device : trendnet TU2-ETG
`uname -a` : OpenBSD puffy49.my.domain 4.9 GENERIC.MP#794 i386
`ifconfig axe0 media` :
axe0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr 00:50:b6:4e:5a:c9
priority: 0
media: Ethernet none (none)
supported media:
media none
Here the dmesg:
OpenBSD 4.9 (GENERIC.MP) #794: Wed Mar 2 07:19:02 MST 2011
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
RTC BIOS diagnostic error a9<clock_battery,config_unit,fixed_disk>
cpu0: Intel(R) Core(TM) i5-2415M CPU @ 2.30GHz ("GenuineIntel" 686-class)
2.30 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,XSAVE,AVX
real mem = 2047651840 (1952MB)
avail mem = 2003992576 (1911MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 07/29/05, SMBIOS rev. 2.4 @ 0xe0000
(61 entries)
bios0: vendor Apple Inc. version "MM51.88Z.0075.B00.1106271442" date
06/27/2011
bios0: Apple Inc. Macmini5,1
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET APIC SBST ECDT SSDT SSDT SSDT SSDT SSDT SSDT
SSDT SSDT SSDT MCFG SSDT SSDT SSDT
acpi0: wakeup devices P0P2(S4) GFX0(S4) PEG1(S4) EC__(S4) GMUX(S3)
HDEF(S4) GIGE(S4) SDXC(S3) RP01(S4) ARPT(S4) RP02(S4) RP03(S4) EHC1(S3)
EHC2(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: unknown i686 model 0x2a, can't get bus clock (0x0)
cpu0: apic clock running at 99MHz
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i5-2415M CPU @ 2.30GHz ("GenuineIntel" 686-class)
2.30 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,XSAVE,AVX
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM) i5-2415M CPU @ 2.30GHz ("GenuineIntel" 686-class)
2.30 GHz
cpu2:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,XSAVE,AVX
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i5-2415M CPU @ 2.30GHz ("GenuineIntel" 686-class)
2.30 GHz
cpu3:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,XSAVE,AVX
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
acpiec0 at acpi0
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-155
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (P0P2)
acpiprt2 at acpi0: bus 5 (PEG1)
acpiprt3 at acpi0: bus 2 (RP01)
acpiprt4 at acpi0: bus -1 (RP02)
acpiprt5 at acpi0: bus 3 (RP03)
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpicpu2 at acpi0: C3, C2, C1, PSS
acpicpu3 at acpi0: C3, C2, C1, PSS
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: SLPB
acpivideo0 at acpi0: IGPU
acpivout0 at acpivideo0: DD02
bios0: ROM list: 0xc0000/0xee00
cpu0: Enhanced SpeedStep 2295 MHz: speeds: 2301, 2300, 2200, 2100, 2000,
1900, 1800, 1700, 1600, 1500, 1400, 1300, 1200, 1100, 1000, 900, 800 MHz
memory map conflict 0xe00f8000/0x1000
memory map conflict 0xfed1c000/0x4000
memory map conflict 0xffed0000/0x30000
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 vendor "Intel", unknown product 0x0104 rev
0x09
ppb0 at pci0 dev 1 function 0 vendor "Intel", unknown product 0x0101 rev
0x09: apic 2 int 16 (irq 255)
pci1 at ppb0 bus 1
ppb1 at pci0 dev 1 function 1 vendor "Intel", unknown product 0x0105 rev
0x09: apic 2 int 16 (irq 255)
pci2 at ppb1 bus 5
ppb2 at pci2 dev 0 function 0 vendor "Intel", unknown product 0x1513 rev
0x00
pci3 at ppb2 bus 6
ppb3 at pci3 dev 0 function 0 vendor "Intel", unknown product 0x1513 rev
0x00: apic 2 int 17 (irq 255)
pci4 at ppb3 bus 7
vendor "Intel", unknown product 0x1513 (class system subclass
miscellaneous, rev 0x00) at pci4 dev 0 function 0 not configured
ppb4 at pci3 dev 3 function 0 vendor "Intel", unknown product 0x1513 rev
0x00: apic 2 int 16 (irq 255)
pci5 at ppb4 bus 8
ppb5 at pci3 dev 4 function 0 vendor "Intel", unknown product 0x1513 rev
0x00: apic 2 int 17 (irq 255)
pci6 at ppb5 bus 9
ppb6 at pci3 dev 5 function 0 vendor "Intel", unknown product 0x1513 rev
0x00: apic 2 int 18 (irq 255)
pci7 at ppb6 bus 58
ppb7 at pci3 dev 6 function 0 vendor "Intel", unknown product 0x1513 rev
0x00: apic 2 int 19 (irq 255)
pci8 at ppb7 bus 107
vga1 at pci0 dev 2 function 0 vendor "Intel", unknown product 0x0126 rev
0x09
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp at vga1 not configured
vendor "Intel", unknown product 0x1c3a (class communications subclass
miscellaneous, rev 0x04) at pci0 dev 22 function 0 not configured
uhci0 at pci0 dev 26 function 0 vendor "Intel", unknown product 0x1c2c rev
0x05: apic 2 int 21 (irq 10)
ehci0 at pci0 dev 26 function 7 vendor "Intel", unknown product 0x1c2d rev
0x05: apic 2 int 23 (irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 vendor "Intel", unknown product 0x1c20
rev 0x05: apic 2 int 22 (irq 11)
azalia0: codecs: Cirrus Logic/0x4206, Intel/0x2805, using Cirrus
Logic/0x4206
audio0 at azalia0
ppb8 at pci0 dev 28 function 0 vendor "Intel", unknown product 0x1c10 rev
0xb5: apic 2 int 16 (irq 255)
pci9 at ppb8 bus 2
"Broadcom BCM57765" rev 0x10 at pci9 dev 0 function 0 not configured
sdhc0 at pci9 dev 0 function 1 "Broadcom SD Host Controller" rev 0x10:
apic 2 int 17 (irq 11)
sdhc0 at 0x10: can't map registers
ppb9 at pci0 dev 28 function 2 vendor "Intel", unknown product 0x1c14 rev
0xb5: apic 2 int 18 (irq 255)
pci10 at ppb9 bus 3
ppb10 at pci10 dev 0 function 0 vendor "TI", unknown product 0x823e rev
0x01
pci11 at ppb10 bus 4
vendor "TI", unknown product 0x823f (class serial bus subclass Firewire,
rev 0x01) at pci11 dev 0 function 0 not configured
uhci1 at pci0 dev 29 function 0 vendor "Intel", unknown product 0x1c27 rev
0x05: apic 2 int 19 (irq 11)
ehci1 at pci0 dev 29 function 7 vendor "Intel", unknown product 0x1c26 rev
0x05: apic 2 int 22 (irq 11)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 vendor "Intel", unknown product 0x1c49 rev
0x05
pciide0 at pci0 dev 31 function 2 vendor "Intel", unknown product 0x1c01
rev 0x05: DMA (unsupported), channel 0 configured to native-PCI, channel 1
configured to native-PCI
pciide0: using apic 2 int 19 (irq 11) for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <Hitachi HTS547550A9E384>
wd0: 16-sector PIO, LBA48, 476940MB, 976773168 sectors
pciide0: channel 1 ignored (not responding; disabled or no drives?)
vendor "Intel", unknown product 0x1c22 (class serial bus subclass SMBus,
rev 0x05) at pci0 dev 31 function 3 not configured
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
nvram: invalid checksum
uhub4 at uhub0 port 1 "Standard Microsystems product 0x2513" rev 2.00/b.b3
addr 2
axe0 at uhub4 port 2 configuration 1 interface 0 "ASIX Electronics
AX88178" rev 2.00/0.01 addr 3
axe0: AX88178, address 00:50:b6:4e:5a:c9
uhub5 at uhub1 port 1 "Standard Microsystems product 0x2513" rev 2.00/b.b3
addr 2
uhidev0 at uhub5 port 1 configuration 1 interface 0 "Apple Computer, Inc.
IR Receiver" rev 2.00/0.16 addr 3
uhidev0: iclass 3/0, 38 report ids
uhid0 at uhidev0 reportid 36: input=4, output=0, feature=0
uhid1 at uhidev0 reportid 37: input=4, output=0, feature=0
uhid2 at uhidev0 reportid 38: input=4, output=0, feature=0
uhidev1 at uhub5 port 3 configuration 1 interface 0 "BTC USB Multimedia
Keyboard" rev 1.10/1.00 addr 4
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev2 at uhub5 port 3 configuration 1 interface 1 "BTC USB Multimedia
Keyboard" rev 1.10/1.00 addr 4
uhidev2: iclass 3/0, 3 report ids
uhid3 at uhidev2 reportid 1: input=1, output=0, feature=0
uhid4 at uhidev2 reportid 2: input=3, output=0, feature=0
uhid5 at uhidev2 reportid 3: input=3, output=0, feature=8
vscsi0 at root
scsibus0 at vscsi0: 256 targets
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
clock: unknown CMOS layout
cpu1: unknown i686 model 0x2a, can't get bus clock (0x0)
cpu2: unknown i686 model 0x2a, can't get bus clock (0x0)
cpu3: unknown i686 model 0x2a, can't get bus clock (0x0)
ukbd0: was console keyboard
wskbd0 detached
ukbd0 detached
uhidev1 detached
uhid3 detached
uhid4 detached
uhid5 detached
uhidev2 detached
umass0 at uhub5 port 2 configuration 1 interface 0 "JetFlash Mass Storage
Device" rev 2.00/1.00 addr 4
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <JetFlash, Transcend 8GB, 8.07> SCSI2
0/direct removable
sd0: 7660MB, 512 bytes/sec, 15687680 sec total
uhidev1 at uhub5 port 3 configuration 1 interface 0 "BTC USB Multimedia
Keyboard" rev 1.10/1.00 addr 5
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev2 at uhub5 port 3 configuration 1 interface 1 "BTC USB Multimedia
Keyboard" rev 1.10/1.00 addr 5
uhidev2: iclass 3/0, 3 report ids
uhid3 at uhidev2 reportid 1: input=1, output=0, feature=0
uhid4 at uhidev2 reportid 2: input=3, output=0, feature=0
uhid5 at uhidev2 reportid 3: input=3, output=0, feature=8
sd0 detached
scsibus1 detached
umass0 detached
umass0 at uhub5 port 2 configuration 1 interface 0 "JetFlash Mass Storage
Device" rev 2.00/1.00 addr 4
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <JetFlash, Transcend 8GB, 8.07> SCSI2
0/direct removable
sd0: 7660MB, 512 bytes/sec, 15687680 sec total
Thank you very much for your helps.
Cheers,
Wesley.
On Thu, 22 Dec 2011 03:07:56 +1100, Jonathan Gray <j...@goblin.cx> wrote:
> The man page is not an exhaustive list, include the full dmesg
> with the device plugged in for a start and the output of
> "ifconfig axe0 media"
>
> On Wed, Dec 21, 2011 at 04:24:58PM +0400, Wesley M. wrote:
>> i read man page axe(4) there's no my model trendnet TU2-ETG :(
>> So i suppose that it is not compatible :(
>>
>> Wesley.
>>
>> On Wed, 21 Dec 2011 16:10:35 +0400, "Wesley M."
<open...@e-solutions.re>
>> wrote:
>> > tried on OpenBSD 5.0 : same problem
>> > ifconfig show :
>> > media : Ethernet none (none)
>> >
>> > On Wed, 21 Dec 2011 16:04:36 +0400, "Wesley M."
>> > <open...@e-solutions.re>
>> > wrote:
>> >> I plug on my OpenBSD 4.9 (fresh install) :Ethernet USB Device,
>> >> trendnet
>> >> TU2-ETG
>> >> It detects axe0, i configured it using dhcp, it doesn't
>> >> work.
>> >> Manually also doesn't work. Pf disabled, no traffic out
>> >>
>> >> any issue ?
>> >>
>> >>
>> >> Here dmesg | grep axe0 :
>> >>
>> >> axe0 at uhub5 port 2 configuration 1 interface
>> >> 0 "ASIX Electronics AX88178" rev 2.00/0.01 addr 5
>> >> axe0: AX88178, address
>> >> 00:50:b6:4e:5a:c9
