system checks.
/dev/sd0a (47cb5ea7ef5a98c2.a): file system is clean; not checking
/dev/sd0g (47cb5ea7ef5a98c2.g): file system is clean; not checking
/dev/sd2a (2dce0ce367914de1.a): file system is clean; not checking
/dev/sd1d (ee13f17952d170d9.d): file system is clean; not checking
/dev/sd0f (47cb5ea7ef5a98c2.f): file system is clean; not checking
/dev/sd3a (70f6a84cebc310ed.a): file system is clean; not checking
/dev/sd0d (47cb5ea7ef5a98c2.d): file system is clean; not checking
/dev/sd0e (47cb5ea7ef5a98c2.e): file syste
then the machine freezes; at the middle of the sentence
If I switch of the machine from the power button the fsck will
complain about inconsistencies and fix them. For some reason
the fsck does not freeze at this time and machine boots up
to the logon prompt.
I have 4 disks and all first partitions in them start at offset 0
(not at offset 63). It does not help whether I have 1 or
4 disks in bays.
At one instance I got continuous printout saying
"ohci2: xxx scheduling overruns"
but have not been able to repeat it.
-pekka-
------ fstab -----------
e8af59fead537ab0.b none swap sw
e8af59fead537ab0.a / ffs rw 1 1
ee13f17952d170d9.d /altroot ffs rw,nodev,nosuid 1 2
ee13f17952d170d9.e /backups ffs rw,nodev,nosuid 1 2
2dce0ce367914de1.d /data ffs rw,nodev,nosuid 1 2
e8af59fead537ab0.h /home ffs rw,nodev,nosuid 1 2
e8af59fead537ab0.i /home/sftpuser ffs rw,nodev,nosuid 1 2
e8af59fead537ab0.f /tmp ffs rw,nodev,nosuid 1 2
e8af59fead537ab0.d /usr ffs rw,nodev 1 2
e8af59fead537ab0.e /usr/local ffs rw,nodev 1 2
e8af59fead537ab0.g /var ffs rw,nodev,nosuid 1 2
70f6a84cebc310ed.d /vmware ffs rw,nodev,nosuid 1 2
------ dmesg starts -----
console is /ebus@1f,464000/serial@2,80
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2013 OpenBSD. All rights reserved.
http://www.OpenBSD.org
OpenBSD 5.3 (GENERIC.MP) #0: Mon May 27 21:49:52 EEST 2013
real mem = 8589934592 (8192MB)
avail mem = 8443371520 (8052MB)
mainbus0 at root: Sun Ultra 45 Workstation
cpu0 at mainbus0: SUNW,UltraSPARC-IIIi (rev 3.4) @ 1600 MHz
cpu0: physical 32K instruction (32 b/l), 64K data (32 b/l), 1024K external
(64 b/l)
cpu1 at mainbus0: SUNW,UltraSPARC-IIIi (rev 3.4) @ 1600 MHz
cpu1: physical 32K instruction (32 b/l), 64K data (32 b/l), 1024K external
(64 b/l)
"memory-controller" at mainbus0 not configured
"memory-controller" at mainbus0 not configured
pyro0 at mainbus0: "Fire", rev 3, ign 780, bus A 2 to 12
pyro0: dvma map c0000000-ffffffff
pci0 at pyro0
ppb0 at pci0 dev 0 function 0 "PLX PEX 8532" rev 0xaa
pci1 at ppb0 bus 3
ppb1 at pci1 dev 1 function 0 "PLX PEX 8532" rev 0xaa
pci2 at ppb1 bus 4
ppb2 at pci2 dev 0 function 0 "Acer Labs M5249 PCI-PCI" rev 0x00
pci3 at ppb2 bus 5
ohci0 at pci3 dev 28 function 0 "Acer Labs M5237 USB" rev 0x03: ivec
0x780, version 1.0, legacy support
ohci1 at pci3 dev 28 function 1 "Acer Labs M5237 USB" rev 0x03: ivec
0x780, version 1.0, legacy support
ohci2 at pci3 dev 28 function 2 "Acer Labs M5237 USB" rev 0x03: ivec
0x780, version 1.0, legacy support
ehci0 at pci3 dev 28 function 3 "Acer Labs M5239 USB2" rev 0x01: ivec 0x781
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Acer Labs EHCI root hub" rev 2.00/1.00 addr 1
auacer0 at pci3 dev 29 function 0 "Acer Labs M5455 Audio" rev 0x21: ivec
0x785
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auacer0
alipm0 at pci3 dev 30 function 1 "Acer Labs M7101 Power" rev 0x00: can't
map i/o space
pciide0 at pci3 dev 31 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc8:
DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using ivec 0x784 for native-PCI interrupt
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <MATSHITA, DVD-RAM UJ-845S, D100> ATAPI
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci2: USB revision 1.0
uhub3 at usb3 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
ppb3 at pci1 dev 2 function 0 "PLX PEX 8532" rev 0xaa
pci4 at ppb3 bus 6
ppb4 at pci4 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb3
pci5 at ppb4 bus 7
bge0 at pci5 dev 4 function 0 "Broadcom BCM5715" rev 0xa2, BCM5715 A1
(0x9001): ivec 0x796, address 00:14:4f:1f:58:ca
brgphy0 at bge0 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
bge1 at pci5 dev 4 function 1 "Broadcom BCM5715" rev 0xa2, BCM5715 A1
(0x9001): ivec 0x797, address 00:14:4f:1f:58:cb
brgphy1 at bge1 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
ppb5 at pci1 dev 3 function 0 "PLX PEX 8532" rev 0xaa: msi
pci6 at ppb5 bus 8
ppb6 at pci1 dev 8 function 0 "PLX PEX 8532" rev 0xaa: msi
pci7 at ppb6 bus 9
ppb7 at pci1 dev 9 function 0 "PLX PEX 8532" rev 0xaa
pci8 at ppb7 bus 10
ppb8 at pci8 dev 0 function 0 "Intel 41210 PCIE-PCIX" rev 0x09
pci9 at ppb8 bus 11
mpi0 at pci9 dev 1 function 0 "Symbios Logic SAS1064" rev 0x02: msi
scsibus1 at mpi0: 63 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, HITACHI HDS7225S, A7BA> SCSI3 0/direct
fixed naa.5000cca316f3f414
sd0: 238471MB, 512 bytes/sector, 488390625 sectors
sd1 at scsibus1 targ 1 lun 0: <ATA, WDC WD7500AADS-0, 0A01> SCSI3 0/direct
fixed naa.50014ee2588aa89c
sd1: 715404MB, 512 bytes/sector, 1465149168 sectors
sd2 at scsibus1 targ 2 lun 0: <ATA, WDC WD1001FALS-0, 0K05> SCSI3 0/direct
fixed naa.50014ee056b9165c
sd2: 953869MB, 512 bytes/sector, 1953525168 sectors
sd3 at scsibus1 targ 3 lun 0: <ATA, ST2000DM001-1CH1, CC24> SCSI3 0/direct
fixed naa.5000c5005c0e35c2
sd3: 1907729MB, 512 bytes/sector, 3907029168 sectors
ppb9 at pci8 dev 0 function 2 "Intel 41210 PCIE-PCIX" rev 0x09
pci10 at ppb9 bus 12
pyro1 at mainbus0: "Fire", rev 3, ign 7c0, bus B 2 to 255
pyro1: dvma map c0000000-ffffffff
pci11 at pyro1
ebus0 at mainbus0
"flashprom" at ebus0 addr 0-1fffff not configured
rtc0 at ebus0 addr 100000-10000f: bq4802
com0 at ebus0 addr 80-87 ivec 0x7c8: ns16550a, 16 byte fifo
com0: console
com1 at ebus0 addr 0-7 ivec 0x7c8: ns16550a, 16 byte fifo
com1: probed fifo depth: 0 bytes
"env-monitor" at ebus0 addr 0-41 not configured
pcfiic0 at ebus0 addr 80-81 ivec 0x7c1
iic0 at pcfiic0
"pca9556" at iic0 addr 0x18 not configured
lmtemp0 at iic0 addr 0x2b: lm76
lmtemp1 at iic0 addr 0x48: lm76, fails to respond
lmtemp2 at iic0 addr 0x4f: lm76
"adt7462" at iic0 addr 0x58 not configured
power0 at ebus0 addr e0-e1 ivec 0x7c3
"i2c" at mainbus0 not configured
"i2c" at mainbus0 not configured
"i2c" at mainbus0 not configured
"ppm" at mainbus0 not configured
uhub4 at uhub0 port 7 "Standard Microsystems product 0x2502" rev 2.00/0.01
addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
bootpath: /pci@1e,600000/pci@0,0/pci@9,**0/pci@0,0/scsi@1,0/disk@0,0
root on sd0a (e8af59fead537ab0.a) swap on sd0b dump on sd0b
WARNING: / was not properly unmounted
umass0 at uhub4 port 1 configuration 1 interface 0 "Kingston DataTraveler
SE9" rev 2.00/1.00 addr 3
umass0: using SCSI over Bulk-Only
scsibus4 at umass0: 2 targets, initiator 0
sd4 at scsibus4 targ 1 lun 0: <Kingston, DataTraveler SE9, 1.00> SCSI0
0/direct removable serial.09511689FBA01AFA339B
sd4: 3824MB, 512 bytes/sector, 7831552 sectors
--- dmesg stops ---
