Hi,
this machine booted fine with a kernel from Februar, now it just hangs.
(boot dka0.0.0.17.0 -flags A)
block 0 of dka0.0.0.17.0 is a valid boot block
reading 15 blocks from dka0.0.0.17.0
bootstrap code read in
base = 200000, image_start = 0, image_bytes = 1e00(7680)
initializing HWRPB at 2000
initializing page table at 3ff2e000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
OpenBSD/Alpha Primary Boot
OpenBSD/alpha boot 1.10
VMS PAL rev: 0x1005200010161
OSF PAL rev: 0x100480002015b
Switch to OSF PAL code succeeded.
Loading bsd...
8131552+610336 [96+395136+254187]=0x8f5050
[ using 650320 bytes of bsd ELF symbol table ]
consinit: not using prom console
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2014 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 5.6-current (GENERIC) #169: Thu Nov 27 05:04:41 MST 2014
dera...@alpha.openbsd.org:/usr/src/sys/arch/alpha/compile/GENERIC
AlphaServer DS10L 617 MHz
8192 byte page size, 1 processor.
real mem = 1073741824 (1024MB)
rsvd mem = 2965504 (2MB)
avail mem = 1045348352 (996MB)
mainbus0 at root
cpu0 at mainbus0: ID 0 (primary), 21264A-14 (pass 2.6)
cpu0: architecture extensions: 307<PAT,MVI,CIX,FIX,BWX>
tsc0 at mainbus0: 21272 Chipset, Cchip rev 0
tsc0: 2 Dchips, 1 memory bus of 16 bytes
tsc0: arrays present: 1024MB, 0MB, 0MB, 0MB, Dchip 0 rev 1
tsp0 at tsc0 hose 0
pci0 at tsp0 bus 0
0:9:0: io address conflict 0x10100/0x80
0:9:0: mem address conflict 0x10a1000/0x400
0:11:0: io address conflict 0x10180/0x80
0:11:0: mem address conflict 0x10a1400/0x400
0:13:0: io address conflict 0x1f0/0x10
0:13:0: io address conflict 0x3f4/0x4
0:13:0: io address conflict 0x170/0x10
0:13:0: io address conflict 0x374/0x4
0:13:0: io address conflict 0x10210/0x10
0:17:0: io address conflict 0x10000/0x100
0:17:0: mem address conflict 0x10a0000/0x1000
sio0 at pci0 dev 7 function 0 "Acer Labs M1533 ISA" rev 0xc3
dc0 at pci0 dev 9 function 0 "DEC 21142/3" rev 0x41: can't map i/o space
dc1 at pci0 dev 11 function 0 "DEC 21142/3" rev 0x41: can't map i/o space
pciide0 at pci0 dev 13 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc1: DMA,
unused (couldn't map registers), channel 0 wired to compatibility, channel 1
wired to compatibility
===hang===
older kernel:
OpenBSD 5.5-beta (GENERIC) #107: Wed Feb 5 22:04:54 MST 2014
t...@alpha.openbsd.org:/usr/src/sys/arch/alpha/compile/GENERIC
AlphaServer DS10L 617 MHz
8192 byte page size, 1 processor.
real mem = 1073741824 (1024MB)
rsvd mem = 2965504 (2MB)
avail mem = 1045733376 (997MB)
rsvd mem = 2965504 (2MB)
[0/568]
avail mem = 1045733376 (997MB)
mainbus0 at root
cpu0 at mainbus0: ID 0 (primary), 21264A-14 (pass 2.6)
cpu0: architecture extensions: 307<PAT,MVI,CIX,FIX,BWX>
tsc0 at mainbus0: 21272 Chipset, Cchip rev 0
tsc0: 2 Dchips, 1 memory bus of 16 bytes
tsc0: arrays present: 1024MB, 0MB, 0MB, 0MB, Dchip 0 rev 1
tsp0 at tsc0 hose 0
pci0 at tsp0 bus 0
sio0 at pci0 dev 7 function 0 "Acer Labs M1533 ISA" rev 0xc3
dc0 at pci0 dev 9 function 0 "DEC 21142/3" rev 0x41: dec 6600 irq 29, address
00:02:a5:c6:
7c:9d
dcphy0 at dc0 phy 31: internal PHY
dc1 at pci0 dev 11 function 0 "DEC 21142/3" rev 0x41: dec 6600 irq 30, address
00:02:a5:c6
:7c:9c
dcphy1 at dc1 phy 31: internal PHY
pciide0 at pci0 dev 13 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc1: DMA,
channel 0 wire
d to compatibility, channel 1 wired to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
ahc0 at pci0 dev 17 function 0 "Adaptec AHA-29160 U160" rev 0x02: dec 6600 irq
47
scsibus0 at ahc0: 16 targets, initiator 7
sd0 at scsibus0 targ 0 lun 0: <FUJITSU, MAW3073NP, 5803> SCSI3 0/direct fixed
serial.FUJIT
SU_MAW3073NP_DAS3P6200246
sd0: 70007MB, 512 bytes/sector, 143374650 sectors
isa0 at sio0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x3bc/4 irq 7
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
mcclock0 at isa0 port 0x70/2: mc146818 or compatible
stray isa irq 3
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
ahc0: target 0 using 16bit transfers
ahc0: target 0 synchronous at 20.0MHz, offset = 0x7f
ahc0: target 0 using 16bit transfers
ahc0: target 0 synchronous at 20.0MHz, offset = 0x7f
root on sd0a (f52fb5aa583a7e47.a) swap on sd0b dump on sd0b
ahc0: target 0 using 16bit transfers
ahc0: target 0 synchronous at 20.0MHz, offset = 0x7f
ahc0: target 0 using 16bit transfers
ahc0: target 0 synchronous at 20.0MHz, offset = 0x7f
ahc0: target 0 using 16bit transfers
ahc0: target 0 synchronous at 20.0MHz, offset = 0x7f
Process (pid 1) got signal 9
panic: init died (signal 0, exit 6)
