>Synopsis: panic: ipintr no HDR
>Category: kernel amd64
>Environment:
System : OpenBSD 5.7
Details : OpenBSD 5.7-current (GENERIC.MP) #919: Mon Apr 13
21:03:43 MDT 2015
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
Architecture: OpenBSD.amd64
Machine : amd64
>Description:
I use security/vpnc to connect to my university network via WIFI, using
$ dmesg | grep athn0
athn0 at pci2 dev 0 function 0 "Atheros AR5418" rev 0x01: apic 1 int 17
athn0: MAC AR5418 rev 2, RF AR5133 (2T3R), ROM rev 4, address 00:1b:63:02:1c:22
and try to download my mail using mail/offlineimap. With both GENERIC and
GENERIC.MP from the April 14 snapshot, running mail/offlineimap triggers the
following panic (transcribed by hand below).
panic: ipintr no HDR
Stopped at Debugger + 0x9: leave
RUN AT LEAST ...
ddb> trace
Debugger() at Debugger + 0x9
panic() at panic + 0xfe
ipintr() at ipintr + 0x3f
netintr() at netintr + 0x85
softintr_dispatch at softintr_dispatch + 0x7f
Xsoftnet() at Xsoftnet + 0x2d
--- interrupt ---
end trace frame: 0x0, count -6
__ALIGN_SIZE + 0x1800
ddb> ps
PID PPID PGRP UID S FLAGS WAIT COMMAND
13743 7862 13743 1000 3 0x83 select python
2.7
15190 7862 13743 1000 3 0x400083 thrsleep python
2.7
21094 7862 13743 1000 3 0x400083 thrsleep python
2.7
9340 7862 13743 1000 3 0x400083 thrsleep python
2.7
24442 7862 13743 1000 3 0x400083 poll python
2.7
30711 7862 13743 1000 3 0x400083 thrsleep python
2.7
*22792 1 22792 0 7 0x0 vpnc
27605 1 27605 77 3 0x90 poll dhclient
22932 1 22392 0 3 0x80 poll dhclient
11828 1 11828 0 3 0x83 ttyin getty
3636 1 3636 0 3 0x83 ttyin getty
25678 1 25678 0 3 0x83 ttyin getty
15010 1 15010 0 3 0x83 ttyin getty
7862 1 7862 1000 3 0x8b pause zsh
4779 1 4779 0 3 0x80 poll cron
20988 1 20988 0 3 0x80 select sshd
19340 18093 18093 0 3 0x80 bpf pflogd
18093 1 18093 0 3 0x80 netio pflogd
11198 6394 6394 73 3 0x90 kqread syslogd
6394 1670 6394 0 3 0x80 netio syslogd
1670 0 0 0 3 0x14200 pgzero
zerothread
26492 0 0 0 3 0x14200 aiodoned aiodoned
14706 0 0 0 3 0x14200 syncer update
26121 0 0 0 3 0x14200 cleaner cleaner
29431 0 0 0 3 0x14200 reaper reaper
10920 0 0 0 3 0x14200 pgdaemon
pagedaemon
6007 0 0 0 3 0x14200 bored srdis
25225 0 0 0 3 0x14200 bored crypto
17126 0 0 0 3 0x14200 pftm pfpurge
32558 0 0 0 3 0x14200 usbtsk usbtask
4497 0 0 0 3 0x14200 usbatsk usbatsk
18769 0 0 0 3 0x40014200 acpi0 acpi0
17854 0 0 0 3 0x14200 bored sensors
7148 0 0 0 3 0x14200 bored softnet
15860 0 0 0 3 0x14200 bored systqmp
22674 0 0 0 3 0x14200 bored systq
21836 0 0 0 3 0x40014200 bored idle0
1 0 1 0 3 0x82 wait init
0 -1 0 0 3 0x10200 scheduler swapper
ddb> boot sync
>How-To-Repeat:
The panic appears both with GENERIC and GENERIC.MP kernels whenever I
to connect my laptop to the WLAN as usual and try to run offlineimap and
vpnc as follows:
$ cat .offlineimaprc
[general]
accounts = main
[Account main]
localrepository = main-local
remoterepository = main-remote
status_backend = sqlite
[Repository main-local]
type = Maildir
localfolders = /home/theo/.Maildir
[Repository main-remote]
type = IMAP
remotehost = mail.ethz.ch
remoteuser = <my user>
remoteport = 993
ssl = yes
cert_fingerprint = b8e69443b92a4134c0becd1bdf7198f8b79cc1fb
$ cat /etc/vpnc/ethz.conf
Interface name tun0
IKE DH Group dh2
IPSec gateway <gateway>
IPSec ID <ipsec-id>
IPSec secret <ipsec-secret>
Xauth username <username>
$ # the following is done according to security/vpnc/pkg/MESSAGE:
$ sudo sysctl net.inet.esp.enable=0 net.inet.esp.udpencap=0
net.inet.esp.enable: 1 -> 0
net.inet.esp.udpencap: 1 -> 0
$ sudo vpnc ethz
Enter password for <username>@<gateway>:
[...]
VPNC started in background (pid: 26106)...
$ offlineimap
Offlineimap 6.5.6
Licensed ...
*** Processing account main
Establishing connection to mail.ethz.ch:993
panic: ipintr no HDR
...
>Fix/Workaround:
It seems likely that the panic has to do with this commit:
https://marc.info/?l=openbsd-cvs&m=142867432629365&w=2
see also:
http://cvsweb.openbsd.org/cgi-bin/cvsweb/src/sys/netinet/ip_input.c.diff?r1=1.247&r2=1.248&f=h
I have a GENERIC.MP kernel compiled from freshly updated sources just two hours
before this commit with which I am unable to reproduce this panic.
dmesg:
OpenBSD 5.7-current (GENERIC.MP) #919: Mon Apr 13 21:03:43 MDT 2015
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2634596352 (2512MB)
avail mem = 2550886400 (2432MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe0000 (37 entries)
bios0: vendor Apple Inc. version "MB21.88Z.00A5.B07.0706270922" date 06/27/07
bios0: Apple Inc. MacBook2,1
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP HPET APIC MCFG ASF! SBST ECDT SSDT SSDT SSDT
acpi0: wakeup devices ADP1(S3) LID0(S3) PXS1(S4) PXS2(S4) USB1(S3) USB2(S3)
USB3(S3) USB4(S3) USB7(S3) EC__(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz, 1995.33 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF
cpu0: 4MB 64b/line 16-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 166MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz, 1995.01 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF
cpu1: 4MB 64b/line 16-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 1
acpimcfg0 at acpi0 addr 0xf0000000, bus 0-255
acpiec0 at acpi0
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (RP01)
acpiprt2 at acpi0: bus 2 (RP02)
acpiprt3 at acpi0: bus 3 (PCIB)
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PWRB
acpibtn2 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "15253732082930497" type 15253732284385612 oem
"15253732284387396"
acpivideo0 at acpi0: GFX0
cpu0: Enhanced SpeedStep 1995 MHz: speeds: 2000, 1833, 1667, 1500, 1333, 1000
MHz
memory map conflict 0x9ef00000/0x100000
memory map conflict 0x9f000000/0x1000000
memory map conflict 0xf00f8000/0x1000
memory map conflict 0xfed1c000/0x4000
memory map conflict 0xfffb0000/0x30000
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
intagp0 at vga1
agp0 at intagp0: aperture at 0xa0000000, size 0x10000000
inteldrm0 at vga1
drm0 at inteldrm0
inteldrm0: 1280x800
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
vendor "Intel", unknown product 0x27a3 (class DASP subclass Time and Frequency,
rev 0x03) at pci0 dev 7 function 0 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi
azalia0: codecs: Sigmatel STAC9220/1
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: msi
pci1 at ppb0 bus 1
mskc0 at pci1 dev 0 function 0 "Marvell Yukon 88E8053" rev 0x22, Yukon-2 EC
rev. A3 (0x2): apic 1 int 16
msk0 at mskc0 port A: address 00:19:e3:38:6c:56
eephy0 at msk0 phy 0: 88E1111 Gigabit PHY, rev. 2
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: msi
pci2 at ppb1 bus 2
athn0 at pci2 dev 0 function 0 "Atheros AR5418" rev 0x01: apic 1 int 17
athn0: MAC AR5418 rev 2, RF AR5133 (2T3R), ROM rev 4, address 00:1b:63:02:1c:22
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 1 int 21
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 1 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 1 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 1 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 1 int 21
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci3 at ppb2 bus 3
"AT&T/Lucent FW322 1394" rev 0x61 at pci3 dev 3 function 0 not configured
pcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <MATSHITA, DVD-R UJ-857D, KBVB> ATAPI 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA, channel
0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 1 int 19 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 1: <TOSHIBA MK1234GSX>
wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
wd0(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 1 int 19
iic0 at ichiic0
iic0: addr 0x48 00=43 01=00 02=4b 03=50 words 00=4300 01=00ff 02=4b00 03=5000
04=ffff 05=ffff 06=ffff 07=ffff
spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
spdmem1 at iic0 addr 0x52: 512MB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
drm: render error detected, EIR: 0x00000010
drm: page table error
drm: PGTBL_ER: 0x00000102
error: [drm:pid0:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010,
masking
drm: render error detected, EIR: 0x00000010
drm: page table error
drm: PGTBL_ER: 0x00000102
uhub5 at uhub0 port 1 "Genesys Logic USB2.0 Hub" rev 2.00/32.98 addr 2
uhub6 at uhub5 port 1 "Apple, Inc. Keyboard Hub" rev 2.00/94.15 addr 3
uhidev0 at uhub6 port 2 configuration 1 interface 0 "Apple, Inc Apple Keyboard"
rev 2.00/0.69 addr 4
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 5 key codes, country code 13
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub6 port 2 configuration 1 interface 1 "Apple, Inc Apple Keyboard"
rev 2.00/0.69 addr 4
uhidev1: iclass 3/0
uhid0 at uhidev1: input=1, output=0, feature=0
uhidev2 at uhub6 port 3 configuration 1 interface 0 "Logitech USB Optical
Mouse" rev 2.00/43.01 addr 5
uhidev2: iclass 3/1
ums0 at uhidev2: 8 buttons, Z dir
wsmouse0 at ums0 mux 0
uvideo0 at uhub0 port 4 configuration 1 interface 0 "Micron Built-in iSight"
rev 2.00/1.84 addr 6
video0 at uvideo0
uhidev3 at uhub1 port 2 configuration 1 interface 0 "Apple Computer Apple
Internal Keyboard / Trackpad" rev 2.00/0.18 addr 2
uhidev3: iclass 3/1
ukbd1 at uhidev3: 8 variable keys, 5 key codes, country code 13
wskbd1 at ukbd1 mux 1
wskbd1: connecting to wsdisplay0
uhidev4 at uhub1 port 2 configuration 1 interface 1 "Apple Computer Apple
Internal Keyboard / Trackpad" rev 2.00/0.18 addr 2
uhidev4: iclass 3/1, 5 report ids
ums1 at uhidev4 reportid 2: 3 buttons
wsmouse1 at ums1 mux 0
ums2 at uhidev4 reportid 5
ums2: mouse has no X report
uhidev5 at uhub1 port 2 configuration 1 interface 2 "Apple Computer Apple
Internal Keyboard / Trackpad" rev 2.00/0.18 addr 2
uhidev5: iclass 3/0
uhid1 at uhidev5: input=1, output=0, feature=0
uhidev6 at uhub3 port 2 configuration 1 interface 0 "Apple Computer, Inc. IR
Receiver" rev 2.00/1.10 addr 2
uhidev6: iclass 3/0, 38 report ids
uhid2 at uhidev6 reportid 36: input=4, output=0, feature=0
uhid3 at uhidev6 reportid 37: input=4, output=0, feature=0
uhid4 at uhidev6 reportid 38: input=4, output=0, feature=0
uhidev7 at uhub4 port 1 configuration 1 interface 0 "Apple Computer HID-proxy"
rev 2.00/19.65 addr 2
uhidev7: iclass 3/1
ukbd2 at uhidev7: 8 variable keys, 6 key codes
wskbd2 at ukbd2 mux 1
wskbd2: connecting to wsdisplay0
uhidev8 at uhub4 port 1 configuration 1 interface 1 "Apple Computer HID-proxy"
rev 2.00/19.65 addr 2
uhidev8: iclass 3/1
ums3 at uhidev8: 5 buttons
wsmouse2 at ums3 mux 0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd0 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed
sd0: 114470MB, 512 bytes/sector, 234435953 sectors
root on sd0a (aee63bc24d6d3bf5.a) swap on sd0b dump on sd0b
usbdevs:
Controller /dev/usb0:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 addr 2: high speed, self powered, config 1, USB2.0 Hub(0x0610), Genesys
Logic(0x05e3), rev 32.98
port 1 addr 3: high speed, power 300 mA, config 1, Keyboard Hub(0x1006),
Apple, Inc.(0x05ac), rev 94.15, iSerialNumber 000000000000
port 1 powered
port 2 addr 4: low speed, power 20 mA, config 1, Apple Keyboard(0x0221),
Apple, Inc(0x05ac), rev 0.69
port 3 addr 5: low speed, power 100 mA, config 1, USB Optical Mouse(0xc019),
Logitech(0x046d), rev 43.01
port 2 powered
port 2 powered
port 3 powered
port 4 addr 6: high speed, power 100 mA, config 1, Built-in iSight(0x8501),
Micron(0x05ac), rev 1.84
port 5 powered
port 6 powered
port 7 powered
port 8 powered
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 addr 2: full speed, power 40 mA, config 1, Apple Internal Keyboard /
Trackpad(0x021b), Apple Computer(0x05ac), rev 0.18
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb3:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 addr 2: full speed, power 100 mA, config 1, IR Receiver(0x8240), Apple
Computer, Inc.(0x05ac), rev 1.10
Controller /dev/usb4:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 addr 2: full speed, self powered, config 1, HID-proxy(0x1000), Apple
Computer(0x05ac), rev 19.65
port 2 powered
