Hello.
Today I tried updating my home firewall to -current and ran into a
kernel panic. Below are the console outputs from bsd.rd, bsd, and a
working bsd-current from March.
The system is an older Portwell NAD-2074 appliance.
Thank you in advance for your help!
--
Andre
bsd.rd:
~~~~~~~
>> OpenBSD/i386 BOOT 3.26...........
boot> boot bsd.rd
booting hd0a:bsd.rd: 3175988+1310272+2057216+0+425984
[72+247664+237984]=0x71daf4
entry point at 0x2000d4
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2015 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 5.8-current (RAMDISK_CD) #1093: Tue Sep 1 01:16:57 MDT 2015
[email protected]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: VIA C7 Processor 1000MHz ("CentaurHauls" 686-class) 1 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,CMOV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE,NXE,SSE3,EST,TM2,xTPR
real mem = 1274605568 (1215MB)
avail mem = 1241051136 (1183MB)
mainbus0 at root
bios0 at mainbus0: date 10/09/07, BIOS32 rev. 0 @ 0xf9f70, SMBIOS rev. 2.3 @
0xf0800 (33 entries)
bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 10/09/2007
acpi at bios0 function 0x0 not configured
apm0 at bios0uvm_fault(0xd08617d4, 0xd0a66000, 0, 4) -> d
fatal page fault (6) in supervisor mode
trap type 6 code 11 eip 80fc cs 38 eflags 10002 cr2 d0a660fc cpl 0
panic: trap type 6, code=11, pc=80fc
The operating system has halted.
Please press any key to reboot.
bsd:
~~~~
>> OpenBSD/i386 BOOT 3.26...........
boot> boot bsd.new
booting hd0a:bsd.new: 7518564+2014480+189444+0+1069056
[72+410960+404883]=0xb134c8
entry point at 0x2000d4
[ using 816328 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2015 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 5.8-current (GENERIC) #1124: Tue Sep 1 01:06:27 MDT 2015
[email protected]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: VIA C7 Processor 1000MHz ("CentaurHauls" 686-class) 1 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,CMOV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE,NXE,SSE3,EST,TM2,xTPR
real mem = 1274560512 (1215MB)
avail mem = 1237835776 (1180MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 10/09/07, BIOS32 rev. 0 @ 0xf9f70, SMBIOS rev. 2.3 @
0xf0800 (33 entries)
bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 10/09/2007
acpi at bios0 function 0x0 not configured
apm0 at bios0uvm_fault(0xd0b6a5e0, 0xd0d7a000, 0, 4) -> d
kernel: page fault trap, code=0
Stopped at __ALIGN_SIZE+0x70fc:uvm_fault(0xd0b8c000, 0x8000, 0, 1) -> e
kernel: page fault trap, code=0
Stopped at db_read_bytes+0x17: movzbl 0(%esi,%ecx,1),%eax
ddb> trace
db_read_bytes(80fc,1,d0d159e0,80fc,d0d159f0) at db_read_bytes+0x17
db_get_value(80fc,1,0,0,d09d2c9a) at db_get_value+0x38
db_disasm(80fc,0,d03cada0,d03cadc5,d09a77b8,d0d15ab0,0,0,d0d15ab0) at db_disasm
+0x31
db_print_loc_and_inst(80fc,d0d15ac8,d0d15ad4,d03cadc5,d09d2c8b) at db_print_loc
_and_inst+0x3e
db_trap(6,0,58,0,d0d15b10) at db_trap+0x8d
kdb_trap(6,0,d0d15b80,4,d) at kdb_trap+0xcc
trap() at trap+0x2a5
--- trap (number 21262) ---
0x11:
ddb> ps
PID PPID PGRP UID S FLAGS WAIT COMMAND
* 0 -1 0 0 7 0x10200 swapper
ddb> show uvm
Current UVM status:
pagesize=4096 (0x1000), pagemask=0xfff, pageshift=12
302407 VM pages: 0 active, 0 inactive, 0 wired, 301540 free (0 zero)
min 10% (25) anon, 10% (25) vnode, 5% (12) vtext
pages 0 anon, 0 vnode, 0 vtext
freemin=0, free-target=0, inactive-target=0, wired-max=0
faults=2, traps=2, intrs=0, ctxswitch=0 fpuswitch=0
softint=0, syscalls=0, kmapent=20
fault counts:
noram=0, noanon=0, pgwait=0, pgrele=0
ok relocks(total)=0(0), anget(retries)=0(0), amapcopy=0
neighbor anon/obj pg=0/0, gets(lock/unlock)=0/0
cases: anon=0, anoncow=0, obj=0, prcopy=0, przero=0
daemon and swap counts:
woke=0, revs=0, scans=0, obscans=0, anscans=0
busy=0, freed=0, reactivate=0, deactivate=0
pageouts=0, pending=0, nswget=0
nswapdev=0, nanon=0, nanonneeded=0 nfreeanon=0
swpages=0, swpginuse=0, swpgonly=0 paging=0
kernel pointers:
objs(kern)=0xd0b6a540
ddb> show bcstats
Current Buffer Cache status:
numbufs 0 busymapped 0, delwri 0
kvaslots 1216 avail kva slots 1216
bufpages 0, dirtypages 0
pendingreads 0, pendingwrites 0
Last known working kernel:
~~~~~~~~~~~~~~~~~~~~~~~~~~
Phoenix Technologies, LTD
System Configurations
+==============================================================================+
| CPU Type : VIA C7 Base Memory : 640K |
| CPU ID/ucode ID : 06D0 Extended Memory :1244160K |
| CPU Clock : 1.00GHz Cache Memory : 128K |
|------------------------------------------------------------------------------|
| Diskette Drive A : None Display Type : EGA/VGA |
| Diskette Drive B : None Serial Port(s) : 3F8 2F8 |
| Pri. Master Disk : None Parallel Port(s) : None |
| Pri. Slave Disk : None DDR2 SDRAM at Rank : 0 1 2 |
| Sec. Master Disk : CHS,DMA 2, 4225MB |
| Sec. Slave Disk : None |
+==============================================================================+
PCI device listing ...
Bus No. Device No. Func No. Vendor/Device Class Device Class IRQ
--------------------------------------------------------------------------------
0 8 0 10EC 8139 0200 Network Cntrlr 5
0 9 0 10EC 8139 0200 Network Cntrlr 11
0 10 0 10EC 8139 0200 Network Cntrlr 9
0 11 0 10EC 8139 0200 Network Cntrlr 7
0 15 0 1106 3149 0101 IDE Cntrlr 11
>> OpenBSD/i386 BOOT 3.26...........
boot>
booting hd0a:/bsd: 9777628+1068236 [72+409680+404343]=0xb1ec54
entry point at 0x200120
[ using 814508 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2015 OpenBSD. All rights reserved. http://www.OpenBSD.org
OpenBSD 5.7 (GENERIC) #0: Thu Mar 5 11:56:41 EST 2015
andre@---:/build/src/sys/arch/i386/compile/GENERIC
cpu0: VIA C7 Processor 1000MHz ("CentaurHauls" 686-class) 1 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,CMOV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE,NXE,SSE3,EST,TM2,xTPR
real mem = 1274560512 (1215MB)
avail mem = 1241370624 (1183MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 10/09/07, BIOS32 rev. 0 @ 0xf9f70, SMBIOS rev. 2.3 @
0xf0800 (33 entries)
bios0: vendor Phoenix Technologies, LTD version "6.00 PG" date 10/09/2007
acpi at bios0 function 0x0 not configured
apm0 at bios0: Power Management spec V1.2 (slowidle)
mpbios0 at bios0: Intel MP Specification 1.4
cpu0 at mainbus0: apid 0 (boot processor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: RNG AES AES-CTR SHA1 SHA256 RSA
cpu0: apic clock running at 99MHz
mpbios0: bus 0 is type PCI
mpbios0: bus 1 is type PCI
mpbios0: bus 2 is type ISA
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 3, 24 pins
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xd464
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfd390/208 (11 entries)
pcibios0: PCI Exclusive IRQs: 5 7 9 10 11
pcibios0: PCI Interrupt Router at 000:17:0 ("VIA VT82C596A ISA" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0x8000 0xc8000/0xc000!
cpu0: unknown Enhanced SpeedStep CPU, msr 0x08100a1308000a13
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 998 MHz: speeds: 1333, 1067 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "VIA CN700 Host" rev 0x00
viaagp0 at pchb0: v3
agp0 at viaagp0: aperture at 0xe8000000, size 0x10000000
pchb1 at pci0 dev 0 function 1 "VIA CN700 Host" rev 0x00
pchb2 at pci0 dev 0 function 2 "VIA CN700 Host" rev 0x00
pchb3 at pci0 dev 0 function 3 "VIA PT890 Host" rev 0x00
pchb4 at pci0 dev 0 function 4 "VIA CN700 Host" rev 0x00
pchb5 at pci0 dev 0 function 7 "VIA CN700 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA VT8377 AGP" rev 0x00
pci_intr_map: bus 0 dev 1 func 0 pin 1; line 9
pci_intr_map: no MP mapping found
pci_intr_map: bus 0 dev 1 func 0 pin 2; line 11
pci_intr_map: no MP mapping found
pci_intr_map: bus 0 dev 1 func 0 pin 3; line 7
pci_intr_map: no MP mapping found
pci_intr_map: bus 0 dev 1 func 0 pin 4; line 11
pci_intr_map: no MP mapping found
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "VIA S3 Unichrome PRO IGP" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
rl0 at pci0 dev 8 function 0 "Realtek 8139" rev 0x10: apic 2 int 16, address
00:90:fb:1b:37:f3
rlphy0 at rl0 phy 0: RTL internal PHY
rl1 at pci0 dev 9 function 0 "Realtek 8139" rev 0x10: apic 2 int 17, address
00:90:fb:1b:37:f2
rlphy1 at rl1 phy 0: RTL internal PHY
rl2 at pci0 dev 10 function 0 "Realtek 8139" rev 0x10: apic 2 int 18, address
00:90:fb:1b:37:f1
rlphy2 at rl2 phy 0: RTL internal PHY
rl3 at pci0 dev 11 function 0 "Realtek 8139" rev 0x10: apic 2 int 19, address
00:90:fb:1b:37:f0
rlphy3 at rl3 phy 0: RTL internal PHY
pciide0 at pci0 dev 15 function 0 "VIA VT6420 SATA" rev 0x80: DMA
pciide0: using apic 2 int 20 for native-PCI interrupt
pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel
0 configured to compatibility, channel 1 configured to compatibility
pciide1: channel 0 disabled (no drives)
wd0 at pciide1 channel 1 drive 0: <SILICONSYSTEMS INC 4GB>
wd0: 1-sector PIO, LBA, 4029MB, 8251488 sectors
wd0(pciide1:1:0): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x81: apic 2 int 21
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x81: apic 2 int 21
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x81: apic 2 int 21
uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x81: apic 2 int 21
ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86: apic 2 int 21
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "VIA EHCI root hub" rev 2.00/1.00 addr 1
viapm0 at pci0 dev 17 function 0 "VIA VT8237 ISA" rev 0x00: SMI
iic0 at viapm0
spdmem0 at iic0 addr 0x50: 256MB DDR2 SDRAM non-parity PC2-4200CL5 SO-DIMM
spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-4200CL5 SO-DIMM
ath0 at pci0 dev 20 function 0 "Atheros AR5212" rev 0x01: apic 2 int 22
ath0: AR2414 7.9 phy 4.5 rf2413 5.6 eeprom 5.2, FCC1A, address 00:13:46:6e:e8:ea
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "VIA UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "VIA UHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
isadma0 at isa0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
viasio0 at isa0 port 0x2e/2M, WDG
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (1b572d8e5c8a10f3.a) swap on wd0b dump on wd0b
