OpenBSD 5.8-current (GENERIC) #2: Wed Sep 23 18:03:08 CEST 2015
    t...@ss20.tmux.org:/svc/src/sys/arch/sparc/compile/GENERIC
real mem = 536395776 (511MB)
avail mem = 521023488 (496MB)
mainbus0 at root: SUNW,SPARCstation-20
cpu0 at mainbus0: RT620/625 @ 150 MHz, on-chip FPU
cpu0: 512K byte write-back, 32 bytes/line, sw flush cache enabled
cpu at mainbus0 not configured
obio0 at mainbus0
clock0 at obio0 addr 0xf1200000: mk48t08 (eeprom)
timer0 at obio0 addr 0xf1300000: delay constant 73, frequency 2000000 Hz
zs0 at obio0 addr 0xf1100000 pri 12, softpri 6
zstty0 at zs0 channel 0: console
zstty1 at zs0 channel 1
zs1 at obio0 addr 0xf1000000 pri 12, softpri 6
zskbd0 at zs1 channel 0: no keyboard
zsms0 at zs1 channel 1
wsmouse0 at zsms0 mux 0
fdc0 at obio0 addr 0xf1700000 pri 11, softpri 4: chip 82077
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
auxreg0 at obio0 addr 0xf1800000
power0 at obio0 addr 0xf1a01000
iommu0 at mainbus0 ioaddr 0xe0000000: version 0x3/0x1, page-size 4096, range 
64MB
sbus0 at iommu0: 25 MHz
dma0 at sbus0 slot 15 offset 0x400000: rev 2
esp0 at dma0 offset 0x800000 pri 4: ESP200, 40MHz
scsibus0 at esp0: 8 targets, initiator 7
sd0 at scsibus0 targ 3 lun 0: <SEAGATE, ST373207LC, D701> SCSI3 0/direct fixed 
serial.SEAGATE_ST373207LC_3KT1A9JF
sd0: 70007MB, 512 bytes/sector, 143374650 sectors
cd0 at scsibus0 targ 6 lun 0: <TOSHIBA, XM-4101TASUNSLCD, 1084> SCSI2 5/cdrom 
removable
ledma0 at sbus0 slot 15 offset 0x400010: rev 2
le0 at ledma0 offset 0xc00000 pri 6: address 08:00:20:f1:d9:cc
le0: 16 receive buffers, 4 transmit buffers
bpp0 at sbus0 slot 15 offset 0x4800000: DMA2
"SUNW,DBRIe" at sbus0 slot 14 offset 0x10000 not configured
eccmemctl0 at mainbus0: version 0x0/0x2
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
bootpath: /iommu@f,e0000000/sbus@f,e0001000/espdma@f,400000/esp@f,800000/sd@3,0
root on sd0a (0cbe8d467aac10c0.a) swap on sd0b dump on sd0b
Automatic boot in progress: starting file system checks.
/dev/sd0a (0cbe8d467aac10c0.a): file system is clean; not checking
/dev/sd0g (0cbe8d467aac10c0.g): file system is clean; not checking
/dev/sd0d (0cbe8d467aac10c0.d): file system is clean; not checking
/dev/sd0f (0cbe8d467aac10c0.f): file system is clean; not checking
/dev/sd0e (0cbe8d467aac10c0.e): file system is clean; not checking
setting tty flags
pf enabled
ddb.console: 0 -> 1
kern.pool_debug: 1 -> 0
starting network
DHCPREQUEST on le0 to 255.255.255.255
DHCPACK from 10.0.0.1 (d0:50:99:46:9f:b9)
bound to 10.0.0.20 -- renewal in 21600 seconds.
starting early daemons: syslogd pflogd ntpd.
starting RPC daemons:.
savecore: no core dump
checking quotas: done.
clearing /tmp
starting pre-securelevel daemons:.
kern.securelevel: 0 -> 1
creating runtime link editor directory cache.
preserving editor files.
starting network daemons: sshd smtpd sndiod.
starting local daemons: cron.
Fri Sep 25 12:25:26 CEST 2015

OpenBSD/sparc (ss20.tmux.org) (console)

login: panic: kernel diagnostic assertion "(entry->etype & UVM_ET_FREEMAPPED) 
== 0" failed: file "../../../../uvm/uvm_map.c", line 402
Stopped at      Debugger+0x8:   jmpl            [%o7 + 0x8], %g0
   TID    PID    UID     PRFLAGS     PFLAGS  CPU  COMMAND
*17256  17256      0     0x14000      0x200    0  reaper
__assert(0xf82b4510, 0xf82dd9b0, 0x192, 0xf82de3c0, 0x0, 0xe00) at __assert+0x1
8
uvm_mapent_free_insert(0xf83410a4, 0x0, 0xfa0ef6f0, 0xfa0ef710, 0x0, 0xfa0ef710
) at uvm_mapent_free_insert+0x94
uvm_map_clip_start(0xf83410a4, 0xfa0ef6f0, 0xfa0ef890, 0xfa024000, 0xf831dd38, 0
x0) at uvm_map_clip_start+0xbc
uvm_unmap_remove(0xf83410a4, 0xfa024000, 0xfa026000, 0xf9fcde5c, 0x0, 0x1) at u
vm_unmap_remove+0x258
uvm_unmap(0xf83410a4, 0xfa024000, 0xfa026000, 0xf82bf688, 0xf8367000, 0x10) at u
vm_unmap+0x88
uvm_uarea_free(0xf9895c68, 0xf830dc4c, 0x4, 0xf9fcdec4, 0x0, 0x0) at uvm_uarea_
free+0x10
reaper(0xf9b9ad80, 0x200, 0xf800a2ec, 0xf83956b0, 0xf8002030, 0xf9fcbf3c) at re
aper+0x98
proc_trampoline(0x0, 0x0, 0x0, 0x0, 0x0, 0x0) at proc_trampoline+0x10
http://www.openbsd.org/ddb.html describes the minimum info required in bug
reports.  Insufficient info makes it difficult to find and fix bugs.
ddb>

Reply via email to