Now it works thanks to advice from Bryan Steele to switch BIOS from RAID
to IDE, I post a new dmesg here if anyone is interrested.
On Mon, 26 Oct 2015, Bo Brantén wrote:
On Mon, 26 Oct 2015, Bo Brantén wrote:
On Mon, 26 Oct 2015, Bo Brantén wrote:
Hello,
I have tried a few versions of OpenBSD from 4.4 to 5.8, both i386 and
amd64 on a computer with an Intel DG965OT motherboard that has an ICH8R
disk controller and it never finds the hard disks. The dmesg at boot
prints two line that look like this:
pciide0: channel 0 ignored (not responding; disabled or no drive)
pciide0: channel 1 ignored (not responding; disabled or no drive)
Both Linux and FreeBSD works on this motherboard.
Bo Branten
OpenBSD 5.8 (RAMDISK_CD) #1142: Sun Aug 16 02:36:04 MDT 2015
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
RTC BIOS diagnostic error 80<clock_battery>
real mem = 8494911488 (8101MB)
avail mem = 8235741184 (7854MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe3350 (36 entries)
bios0: vendor Intel Corp. version "MQ96510J.86A.1754.2008.1117.0002" date
11/17/2008
bios0: Intel Corporation DG965OT
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC WDDT MCFG ASF! SSDT SSDT SSDT SSDT SSDT
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz, 2397.88 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF,SENSOR
cpu0: 4MB 64b/line 16-way L2 cache
cpu0: apic clock running at 266MHz
cpu0: mwait min=64, max=64, C-substates=0.2, IBE
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 6 (P32_)
acpiprt2 at acpi0: bus 1 (PEX0)
acpiprt3 at acpi0: bus 2 (PEX1)
acpiprt4 at acpi0: bus 3 (PEX2)
acpiprt5 at acpi0: bus 4 (PEX3)
acpiprt6 at acpi0: bus 5 (PEX4)
acpiprt7 at acpi0: bus -1 (PEX5)
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82G965 Host" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel 82G965 Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
"Intel 82G965 HECI" rev 0x02 at pci0 dev 3 function 0 not configured
em0 at pci0 dev 25 function 0 "Intel ICH8 IGP C" rev 0x02: msi, address
00:19:d1:e5:4c:88
uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x02: apic 2 int 16
uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x02: apic 2 int 21
ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x02: apic 2 int 18
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
"Intel 82801H HD Audio" rev 0x02 at pci0 dev 27 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x02: msi
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 82801H PCIE" rev 0x02: msi
pci2 at ppb1 bus 2
pciide0 at pci2 dev 0 function 0 "Marvell 88SE6101 IDE" rev 0xb1: DMA
(unsupported), channel 0 configured to native-PCI, channel 1 configured to
native-PCI
pciide0: using apic 2 int 17 for native-PCI interrupt
pciide0: channel 0 ignored (not responding; disabled or no drives?)
pciide0: channel 1 ignored (not responding; disabled or no drives?)
ppb2 at pci0 dev 28 function 2 "Intel 82801H PCIE" rev 0x02: msi
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 3 "Intel 82801H PCIE" rev 0x02: msi
pci4 at ppb3 bus 4
ppb4 at pci0 dev 28 function 4 "Intel 82801H PCIE" rev 0x02: msi
pci5 at ppb4 bus 5
uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x02: apic 2 int 23
uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x02: apic 2 int 19
uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x02: apic 2 int 18
ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x02: apic 2 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb5 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xf2
pci6 at ppb5 bus 6
ral0 at pci6 dev 0 function 0 "Ralink RT2561S" rev 0x00: apic 2 int 21, address
00:24:1d:3a:b6:c8
ral0: MAC/BBP RT2561C, RF RT2527
"TI TSB43AB22 FireWire" rev 0x00 at pci6 dev 3 function 0 not configured
"Intel 82801HH LPC" rev 0x02 at pci0 dev 31 function 0 not configured
pciide1 at pci0 dev 31 function 2 "Intel 82801H SATA" rev 0x02: DMA, channel 0
configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 2 int 19 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <INTEL SSDSA2M160G2GC>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
atapiscsi0 at pciide1 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, CDDVDW SH-S203B, SB00> ATAPI 5/cdrom
removable
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
cd0(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 5
wd1 at pciide1 channel 1 drive 0: <SAMSUNG HD103SJ>
wd1: 16-sector PIO, LBA48, 953869MB, 1953525168 sectors
wd1(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 6
"Intel 82801H SMBus" rev 0x02 at pci0 dev 31 function 3 not configured
pciide2 at pci0 dev 31 function 5 "Intel 82801H SATA" rev 0x02: DMA, channel 0
wired to native-PCI, channel 1 wired to native-PCI
pciide2: using apic 2 int 19 for native-PCI interrupt
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
umass0 at uhub1 port 1 configuration 1 interface 0 "Kingston DataTraveler 112"
rev 2.00/1.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <Kingston, DataTraveler 112, 1.00> SCSI2 0/direct
removable serial.0951162aFB31B5F51C66
sd0: 14762MB, 512 bytes/sector, 30233588 sectors
softraid0 at root
scsibus2 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
