Hi Michael, Thanks for the report. If you still have this snapshot installed, could you please do a "boot -d", "w mp_verbose 1", "continue" and then show us the ioapic dump.
Thanks, Mike On 14 January 2016 at 22:37, Michael Lesniewski <lesniewskis...@gmail.com> wrote: > Synopsis: ehci_sync_hc: tsleep, system doesn't boot > Category: kernel > Environment: > System : OpenBSD 5.9 > Details : OpenBSD 5.9-beta (GENERIC.MP) #1825: Tue Jan 12 > 22:14:04 MST 2016 > > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > > Architecture: OpenBSD.amd64 > Machine : amd64 > Description: > Booting the latest snapshots (from the 13th and the 14th) the system > does not boot. > Last lines shown when booting are: > spkr0 at pcppi0 > ehci_sync_hc: tsleep() = 35 > ehci_sync_hc: tsleep() = 35 > ehci_sync_hc: tsleep() = 35 > ehci_sync_hc: tsleep() = 35 > ehci_sync_hc: tsleep() = 35 > ehci_sync_hc: tsleep() = 35 > ehci_sync_hc: tsleep() = 35 > ehci_sync_hc: tsleep() = 35 > uhub2: device problem, disabling port > ehci_sync_hc: tsleep() = 35 > ehci_sync_hc: tsleep() = 35 > ehci_sync_hc: tsleep() = 35 > ehci_sync_hc: tsleep() = 35 > ehci_sync_hc: tsleep() = 35 > ehci_sync_hc: tsleep() = 35 > ehci_sync_hc: tsleep() = 35 > ehci_sync_hc: tsleep() = 35 > uhub2: device problem, disabling port > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > > The system then gets stuck, no keyboard input registers and only holding the > power button is an option. > The kernel image from the 12 (dmesg below) works fine. This happens on both > bsd.mp and bsd.sp > > How-To-Repeat: > Boot latest kernel on this machine > Fix: > Unknown >
