Mike Belopuhov: > On 15 January 2016 at 21:54, George Rosamond > <[email protected]> wrote: >> Mike Belopuhov: >>> On 15 January 2016 at 21:43, Mike Belopuhov <[email protected]> wrote: >>>> On 15 January 2016 at 21:41, George Rosamond >>>> <[email protected]> wrote: >>>>> Mike Belopuhov: >>>>>> Hi, >>>>>> >>>>>> Thanks for the report. Could you please do a "boot -d", "w mp_verbose >>>>>> 1", "continue" >>>>>> and then show us the ioapic dump. >>>>> >>>>> I don't have console, but this is what I have, manually typed: >>>>> >>>>> ioapic0: int1 0x92 0x0 >>>>> " int9 0xa090 0x0 >>>>> " int12 0x93 0x0 >>>>> " int16 0xb0b0 0x0 >>>>> " int17 0xe063 0x0 >>>>> " int18 0xb062 0x0 >>>>> " int19 0xa061 0x0 >>>>> >>>>> then back to the ehci_sync_hc's posted below, then: >>>>> >>>>> stopped at usb_allocmem+0x175: cmpq %rbx,0(%rax) >>>>> >>>> >>>> cool, could you please post ehci, ohci and uhci lines from your >>>> dmesg as well? >>>> >>> >>> And I'm been told that this might have been caused by something >>> else. To rule that out could you also try a newer snapshot (Jan 15). >>> >> >> Sorry, I should have mentioned that I did update to today's snapshot, >> and the problem recurred. >> >> I can still post dmesg output of ehci, ohci, uhci if you still need. >> > > Please do.
Also updated to 2nd snapshot from today, with same results. ahci0 at pci0 dev 17 function 0 "ATI SBx00 SATA" rev 0x00: apic 2 int 19, AHCI 1.2 ahci0: port 0: 3.0Gb/s ohci0 at pci0 dev 18 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18, version 1.0, legacy support ehci0 at pci0 dev 18 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1 ohci1 at pci0 dev 19 function 0 "ATI SB700 USB" rev 0x00: apic 2 int 18, version 1.0, legacy support ehci1 at pci0 dev 19 function 2 "ATI SB700 USB2" rev 0x00: apic 2 int 17 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 "ATI EHCI root hub" rev 2.00/1.00 addr 1 usb2 at ohci0: USB revision 1.0 uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1 usb3 at ohci1: USB revision 1.0 uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1 g > >> Plus here's two (older) dmesgs from dmesgd.nycbug.org of x120e's, >> although there might be differences. >> >> http://dmesgd.nycbug.org/index.cgi?action=dmesgd&do=view&id=2632 >> >> http://dmesgd.nycbug.org/index.cgi?action=dmesgd&do=view&id=2169 >> >> g >>
