On 23/08/16(Tue) 08:58, Sebastien Marie wrote: > Hi, Thanks for your report.
> During the night, my gateway paniced: > > OpenBSD 6.0-current (GENERIC.MP) #2366: Wed Aug 17 14:05:46 MDT 2016 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > > (full dmesg at end). > > The system was running since Aug 18 without trouble. > > Below is a manual transcription of the console: > > panic: kernel diagnostic assertion "ifa == rt->rt_ifa" failed: file > "../../../../netinet6/nd6.c", line 1043 I've seen this KASSERT() trigger once during last year but I could never reproduce it. Somehow I believe that r1.317 of net/route.c might fix this problem. If you can reproduce it and know how I'd be interested. > Starting stack trace... > panic() at panic+0x10b > __assert() at __assert+0x25 > nd6_rtrequest() at nd6_rtrequest+0x4f4 > rtrequest() at rtrequest+0x5b5 > rt_match() at rt_match+0xf4 > _rtalloc() at _rtalloc+0x18 > ip6_input() at ip6_input+0x524 > ip6intr() at ip6intr+0x18 > if_netisr() at if_netisr+0xf5 > taskq_thread() at taskq_thread+0x6c > end trace frame: 0x0, count:247 > End of stack trace. > syncing disks... 12 done > > The system didn't reboot (whereas ddb.panic=0 was set) neither enter > in ddb(4) (expected due to ddb.panic=0). No savecore at reboot. > > So the report could be a bit short, sorry. > > Since, I upgraded the system to latest -current (snapshot): > > OpenBSD 6.0-current (GENERIC.MP) #2383: Mon Aug 22 17:28:09 MDT 2016 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > > > About the configuration: > - re0 is physical network interface > - several vlans are configured on top of re0 > - over vlan10, a pppoe0 interface is configured > > The gateway forwards IPv4 and IPv6 traffic. > > IPv6 is obtained from pppoe0 via DHCPv6 Delegated Prefix (using dhcpcd > port), and distributed to some others vlans via rtadvd(8). > > Thanks. > -- > Sebastien Marie > > > OpenBSD 6.0-current (GENERIC.MP) #2366: Wed Aug 17 14:05:46 MDT 2016 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 921632768 (878MB) > avail mem = 889274368 (848MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xf0000 (42 entries) > bios0: vendor Phoenix Technologies, LTD version "MS7297 1.08" date 08/22/2007 > bios0: Hewlett-Packard 0A7C > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP SSDT HPET MCFG APIC > acpi0: wakeup devices USB0(S3) USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB5(S3) > AZAL(S3) AUDO(S3) MODM(S3) P2P_(S5) RLAN(S5) PCE2(S4) PCE3(S4) PCE4(S4) > PCE5(S4) PCE6(S4) [...] > acpitimer0 at acpi0: 3579545 Hz, 32 bits > acpihpet0 at acpi0: 14318180 Hz > acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255 > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+, 2593.91 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,3DNOWP > cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB > 64b/line 16-way L2 cache > cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative > cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > cpu0: apic clock running at 199MHz > cpu1 at mainbus0: apid 1 (application processor) > cpu1: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+, 2593.50 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,CX16,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,3DNOWP > cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB > 64b/line 16-way L2 cache > cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative > cpu1: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 21, 24 pins > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 2 (P2P_) > acpiprt2 at acpi0: bus -1 (PCE2) > acpiprt3 at acpi0: bus -1 (PCE3) > acpiprt4 at acpi0: bus -1 (PCE4) > acpiprt5 at acpi0: bus -1 (PCE5) > acpiprt6 at acpi0: bus -1 (PCE6) > acpiprt7 at acpi0: bus -1 (PCE7) > acpiprt8 at acpi0: bus -1 (PCE8) > acpiprt9 at acpi0: bus 1 (AGP_) > acpicpu0 at acpi0: C1(@1 halt!), PSS > acpicpu1 at acpi0: C1(@1 halt!), PSS > acpibtn0 at acpi0: PWRB > "PNP0501" at acpi0 not configured > "PNP0401" at acpi0 not configured > "PNP0303" at acpi0 not configured > cpu0: PowerNow! K8 2593 MHz: speeds: 2600 2400 2200 2000 1800 1000 MHz > pci0 at mainbus0 bus 0 > 0:18:0: mem address conflict 0xfec01000/0x400 > pchb0 at pci0 dev 0 function 0 "ATI RS480 Host" rev 0x10 > ppb0 at pci0 dev 1 function 0 "ATI RS480 PCIE" rev 0x00 > pci1 at ppb0 bus 1 > radeondrm0 at pci1 dev 5 function 0 "ATI Radeon XPRESS 200" rev 0x00 > drm0 at radeondrm0 > radeondrm0: apic 2 int 17 > ahci0 at pci0 dev 18 function 0 "ATI SB600 SATA" rev 0x00: apic 2 int 22, > AHCI 1.1 > ahci0: port 0: 1.5Gb/s > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 0 lun 0: <ATA, FUJITSU MHV2060B, 0085> SCSI3 0/direct > fixed t10.ATA_FUJITSU_MHV2060BH_NW10T6326AVK > sd0: 55796MB, 512 bytes/sector, 114270345 sectors > ohci0 at pci0 dev 19 function 0 "ATI SB600 USB" rev 0x00: apic 2 int 16, > version 1.0, legacy support > ohci1 at pci0 dev 19 function 1 "ATI SB600 USB" rev 0x00: apic 2 int 17, > version 1.0, legacy support > ohci2 at pci0 dev 19 function 2 "ATI SB600 USB" rev 0x00: apic 2 int 18, > version 1.0, legacy support > ohci3 at pci0 dev 19 function 3 "ATI SB600 USB" rev 0x00: apic 2 int 17, > version 1.0, legacy support > ohci4 at pci0 dev 19 function 4 "ATI SB600 USB" rev 0x00: apic 2 int 18, > version 1.0, legacy support > ehci0 at pci0 dev 19 function 5 "ATI SB600 USB2" rev 0x00: apic 2 int 19 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "ATI EHCI root hub" rev 2.00/1.00 addr 1 > piixpm0 at pci0 dev 20 function 0 "ATI SBx00 SMBus" rev 0x13: SMI > iic0 at piixpm0 > iic0: addr 0x2f 00=c2 01=0f 02=00 03=00 04=07 05=20 06=18 07=01 08=00 14=14 > 15=62 16=02 17=05 words 00=c2ff 01=0fff 02=00ff 03=00ff 04=07ff 05=20ff > 06=18ff 07=01ff > spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5 > pciide0 at pci0 dev 20 function 1 "ATI SB600 IDE" rev 0x00: DMA, channel 0 > configured to native-PCI, channel 1 configured to native-PCI > pciide0: using apic 2 int 16 for native-PCI interrupt > azalia0 at pci0 dev 20 function 2 "ATI SBx00 HD Audio" rev 0x00: apic 2 int 23 > azalia0: codecs: Realtek/0x0862 > audio0 at azalia0 > pcib0 at pci0 dev 20 function 3 "ATI SB600 ISA" rev 0x00 > ppb1 at pci0 dev 20 function 4 "ATI SB600 PCI" rev 0x00 > pci2 at ppb1 bus 2 > re0 at pci2 dev 2 function 0 "D-Link DGE-528T" rev 0x10: RTL8169/8110SB > (0x1000), apic 2 int 22, address c8:be:19:e2:2c:ed > rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 3 > rl0 at pci2 dev 6 function 0 "Realtek 8139" rev 0x10: apic 2 int 21, address > 00:1d:92:43:43:95 > rlphy0 at rl0 phy 0: RTL internal PHY > pchb1 at pci0 dev 24 function 0 "AMD AMD64 0Fh HyperTransport" rev 0x00 > pchb2 at pci0 dev 24 function 1 "AMD AMD64 0Fh Address Map" rev 0x00 > pchb3 at pci0 dev 24 function 2 "AMD AMD64 0Fh DRAM Cfg" rev 0x00 > kate0 at pci0 dev 24 function 3 "AMD AMD64 0Fh Misc Cfg" rev 0x00: core rev > BH-G1 > usb1 at ohci0: USB revision 1.0 > uhub1 at usb1 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > usb2 at ohci1: USB revision 1.0 > uhub2 at usb2 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > usb3 at ohci2: USB revision 1.0 > uhub3 at usb3 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > usb4 at ohci3: USB revision 1.0 > uhub4 at usb4 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > usb5 at ohci4: USB revision 1.0 > uhub5 at usb5 "ATI OHCI root hub" rev 1.00/1.00 addr 1 > isa0 at pcib0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > lpt0 at isa0 port 0x378/4 irq 7 > wbsio0 at isa0 port 0x4e/2: W83627EHF rev 0x68 > lm1 at wbsio0 port 0x260/8: W83627EHF > umass0 at uhub0 port 7 configuration 1 interface 0 "Generic USB2.0-CRW" rev > 2.00/11.22 addr 2 > umass0: using SCSI over Bulk-Only > scsibus2 at umass0: 2 targets, initiator 0 > sd1 at scsibus2 targ 1 lun 0: <Generic-, Compact Flash, 1.00> SCSI0 0/direct > removable > sd2 at scsibus2 targ 1 lun 1: <Generic-, SM/xD-Picture, 1.00> SCSI0 0/direct > removable > sd3 at scsibus2 targ 1 lun 2: <Generic-, SD/MMC, 1.00> SCSI0 0/direct > removable > sd4 at scsibus2 targ 1 lun 3: <Generic-, MS/MS-Pro, 1.00> SCSI0 0/direct > removable > vscsi0 at root > scsibus3 at vscsi0: 256 targets > softraid0 at root > scsibus4 at softraid0: 256 targets > root on sd0a (dd15967b7ad164f3.a) swap on sd0b dump on sd0b > WARNING: / was not properly unmounted > radeondrm0: 1280x1024 > wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0 > wsdisplay0: screen 1-5 added (std, vt100 emulation) >
