Hi,
I upgraded my laptop (amd64) to latest snapshot, and I experiment odd network
connectivity.
in resume:
- ping is ok (lan and internet)
- udp is ok (lan and internet) - DNS is working
- tcp isn't working (connect: no route to host) - tested with several tools:
ssh(1), nc(1), or telnet(1)
the problem is present for lan and internet addresses.
my /etc/hostname.bge0 is simple:
$ cat /etc/hostname.bge0
dhcp
inet6 autoconf
I have removed "inet6 autoconf", but it doesn't change anything.
I have also some vlans on top of bge0, but removing hostname.vlan* doesn't
change anything.
I have also some static arp entries (setted via /etc/rc.local: arp -F -s
192.168.92.2 c8:be:19:e2:2c:ed permanent),
but removing them doesn't change anything too.
# route -n show
(after booting with just dhcp inside hostname.bge0)
Routing tables
Internet:
Destination Gateway Flags Refs Use Mtu Prio Iface
default 192.168.92.2 UGS 1 175 - 8 bge0
224/4 127.0.0.1 URS 0 0 32768 8 lo0
127/8 127.0.0.1 UGRS 0 0 32768 8 lo0
127.0.0.1 127.0.0.1 UHhl 2 85 32768 1 lo0
192.168.92/24 192.168.92.42 UCn 1 24 - 4 bge0
192.168.92.1 f0:7d:68:d8:7a:9b UHLS3 0 0 - 8 bge0
192.168.92.2 c8:be:19:e2:2c:ed UHLch 1 38 - 4 bge0
192.168.92.3 00:1e:c9:e8:b3:c8 UHLS3 0 0 - 8 bge0
192.168.92.4 00:1e:c9:e8:b3:cb UHLS3 0 1 - 8 bge0
192.168.92.42 00:1b:38:33:97:b0 UHLl 0 160 - 1 bge0
192.168.92.255 192.168.92.42 UHb 0 0 - 1 bge0
Internet6:
Destination Gateway Flags Refs
Use Mtu Prio Iface
::/96 ::1 UGRS 0
0 32768 8 lo0
::/104 ::1 UGRS 0
0 32768 8 lo0
::1 ::1 UHhl 14
28 32768 1 lo0
::127.0.0.0/104 ::1 UGRS 0
0 32768 8 lo0
::224.0.0.0/100 ::1 UGRS 0
0 32768 8 lo0
::255.0.0.0/104 ::1 UGRS 0
0 32768 8 lo0
::ffff:0.0.0.0/96 ::1 UGRS 0
0 32768 8 lo0
2002::/24 ::1 UGRS 0
0 32768 8 lo0
2002:7f00::/24 ::1 UGRS 0
0 32768 8 lo0
2002:e000::/20 ::1 UGRS 0
0 32768 8 lo0
2002:ff00::/24 ::1 UGRS 0
0 32768 8 lo0
fe80::/10 ::1 UGRS 0
0 32768 8 lo0
fec0::/10 ::1 UGRS 0
0 32768 8 lo0
fe80::1%lo0 fe80::1%lo0 UHl 0
0 32768 1 lo0
ff01::/16 ::1 UGRS 0
0 32768 8 lo0
ff01::%lo0/32 ::1 Um 0
1 32768 4 lo0
ff02::/16 ::1 UGRS 0
0 32768 8 lo0
ff02::%lo0/32 ::1 Um 0
1 32768 4 lo0
current unworking system:
-------------------------
OpenBSD 6.0-current (GENERIC.MP) #2421: Mon Sep 5 07:50:28 MDT 2016
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2122121216 (2023MB)
avail mem = 2053373952 (1958MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf398f (23 entries)
bios0: vendor Hewlett-Packard version "68YCU Ver. F.0B" date 09/05/2007
bios0: Hewlett-Packard HP Compaq nc6400 (EH522AV)
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC HPET APIC MCFG TCPA SSDT SSDT SSDT SSDT SSDT
acpi0: wakeup devices C098(S5) C0F7(S3) C0F8(S3) C0F9(S3) C0FA(S3) C101(S0)
C229(S0) C111(S5) C234(S5) C235(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz, 1662.75 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF,SENSOR
cpu0: 2MB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 166MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz, 1662.51 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF,SENSOR
cpu1: 2MB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiprt0 at acpi0: bus 2 (C098)
acpiprt1 at acpi0: bus 8 (C101)
acpiprt2 at acpi0: bus 16 (C111)
acpiprt3 at acpi0: bus 0 (C002)
acpiec0 at acpi0
acpicpu0 at acpi0: !C2(500@1 mwait.1@0x10), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: !C2(500@1 mwait.1@0x10), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: C1E7, resource for C1E2
acpipwrres1 at acpi0: C1EF, resource for C1E8
acpipwrres2 at acpi0: C1F6, resource for C1F0
acpipwrres3 at acpi0: C220, resource for C21E
acpipwrres4 at acpi0: C228, resource for C11A
acpipwrres5 at acpi0: C32D, resource for C331
acpipwrres6 at acpi0: C32E, resource for C332
acpipwrres7 at acpi0: C32F, resource for C333
acpipwrres8 at acpi0: C330, resource for C334
acpitz0 at acpi0: critical temperature is 256 degC
acpitz1 at acpi0: critical temperature is 105 degC
acpitz2 at acpi0: critical temperature is 105 degC
acpitz3 at acpi0: critical temperature is 105 degC
acpitz4 at acpi0: critical temperature is 110 degC
"PNP0A06" at acpi0 not configured
tpm0 at acpi0: C205 addr 0xfed40000/0x5000: Infineon SLB9635 1.2 rev 0x10
"PNP0303" at acpi0 not configured
"SYN0122" at acpi0 not configured
"HPQ0004" at acpi0 not configured
"HPQ0006" at acpi0 not configured
acpibat0 at acpi0: C1B4 model "Primary" serial 03899 2007/05/17 type LIon oem
"Hewlett-Packard"
acpibat1 at acpi0: C1B3 not present
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: C249
acpibtn1 at acpi0: C241
"PNP0C14" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
acpivideo0 at acpi0: C085
cpu0: Enhanced SpeedStep 1662 MHz: speeds: 1667, 1333, 1000 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
inteldrm0 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
drm0 at inteldrm0
intagp0 at inteldrm0
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0: apic 1 int 16
inteldrm0: 1024x768
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: msi
azalia0: codecs: Analog Devices AD1981HD, AT&T/Lucent/0x3026, using Analog
Devices AD1981HD
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: msi
pci1 at ppb0 bus 8
bge0 at pci1 dev 0 function 0 "Broadcom BCM5753M" rev 0x21, BCM5750 C1
(0x4201): msi, address 00:1b:38:33:97:b0
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: msi
pci2 at ppb1 bus 16
bwi0 at pci2 dev 0 function 0 "Broadcom BCM4312" rev 0x01: apic 1 int 17,
address 00:1a:73:6c:90:d3
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 1 int 20
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 1 int 22
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 1 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 1 int 19
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 1 int 20
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe1
pci3 at ppb2 bus 2
cbb0 at pci3 dev 6 function 0 "TI PCIXX12 CardBus" rev 0x00: apic 1 int 18
"TI PCIXX12 Smart Card" rev 0x00 at pci3 dev 6 function 4 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x10, lattimer 0x20
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-U10N, HP06> ATAPI 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x01: msi, AHCI 1.1
ahci0: port 0: 1.5Gb/s
scsibus2 at ahci0: 32 targets
sd0 at scsibus2 targ 0 lun 0: <ATA, ST500LM012 HN-M5, 2BA3> SCSI3 0/direct
fixed naa.50004cf2107a1e38
sd0: 476940MB, 512 bytes/sector, 976773168 sectors
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics touchpad, firmware 6.2
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
ugen0 at uhub2 port 1 "AuthenTec Fingerprint Sensor" rev 1.10/6.23 addr 2
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
sd1 at scsibus4 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
sd1: 473861MB, 512 bytes/sector, 970467600 sectors
root on sd1a (46bec6cd2747dbb1.a) swap on sd1b dump on sd1b
old and working system:
-----------------------
OpenBSD 6.0-current (GENERIC.MP) #2400: Sun Aug 28 12:30:07 MDT 2016
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2122121216 (2023MB)
avail mem = 2053382144 (1958MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf398f (23 entries)
bios0: vendor Hewlett-Packard version "68YCU Ver. F.0B" date 09/05/2007
bios0: Hewlett-Packard HP Compaq nc6400 (EH522AV)
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC HPET APIC MCFG TCPA SSDT SSDT SSDT SSDT SSDT
acpi0: wakeup devices C098(S5) C0F7(S3) C0F8(S3) C0F9(S3) C0FA(S3) C101(S0)
C229(S0) C111(S5) C234(S5) C117(S5) C235(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz, 1662.81 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF,SENSOR
cpu0: 2MB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 166MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz, 1662.50 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF,SENSOR
cpu1: 2MB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiprt0 at acpi0: bus 2 (C098)
acpiprt1 at acpi0: bus 8 (C101)
acpiprt2 at acpi0: bus 16 (C111)
acpiprt3 at acpi0: bus 0 (C002)
acpiec0 at acpi0
acpicpu0 at acpi0: !C2(500@1 mwait.1@0x10), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: !C2(500@1 mwait.1@0x10), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: C1E7, resource for C1E2
acpipwrres1 at acpi0: C1EF, resource for C1E8
acpipwrres2 at acpi0: C1F6, resource for C1F0
acpipwrres3 at acpi0: C220, resource for C21E
acpipwrres4 at acpi0: C228, resource for C11A
acpipwrres5 at acpi0: C32D, resource for C331
acpipwrres6 at acpi0: C32E, resource for C332
acpipwrres7 at acpi0: C32F, resource for C333
acpipwrres8 at acpi0: C330, resource for C334
acpitz0 at acpi0: critical temperature is 256 degC
acpitz1 at acpi0: critical temperature is 105 degC
acpitz2 at acpi0: critical temperature is 105 degC
acpitz3 at acpi0: critical temperature is 105 degC
acpitz4 at acpi0: critical temperature is 110 degC
"PNP0A06" at acpi0 not configured
tpm0 at acpi0: C205 addr 0xfed40000/0x5000: Infineon SLB9635 1.2 rev 0x10
"PNP0303" at acpi0 not configured
"SYN0122" at acpi0 not configured
"HPQ0004" at acpi0 not configured
"HPQ0006" at acpi0 not configured
acpibat0 at acpi0: C1B4 model "Primary" serial 03899 2007/05/17 type LIon oem
"Hewlett-Packard"
acpibat1 at acpi0: C1B3 not present
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: C249
acpibtn1 at acpi0: C241
"PNP0C14" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
acpivideo0 at acpi0: C085
cpu0: Enhanced SpeedStep 1662 MHz: speeds: 1667, 1333, 1000 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
inteldrm0 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
drm0 at inteldrm0
intagp0 at inteldrm0
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0: apic 1 int 16
inteldrm0: 1024x768
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: msi
azalia0: codecs: Analog Devices AD1981HD, AT&T/Lucent/0x3026, using Analog
Devices AD1981HD
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: msi
pci1 at ppb0 bus 8
bge0 at pci1 dev 0 function 0 "Broadcom BCM5753M" rev 0x21, BCM5750 C1
(0x4201): msi, address 00:1b:38:33:97:b0
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: msi
pci2 at ppb1 bus 16
bwi0 at pci2 dev 0 function 0 "Broadcom BCM4312" rev 0x01: apic 1 int 17,
address 00:1a:73:6c:90:d3
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 1 int 20
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 1 int 22
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 1 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 1 int 19
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 1 int 20
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe1
pci3 at ppb2 bus 2
cbb0 at pci3 dev 6 function 0 "TI PCIXX12 CardBus" rev 0x00: apic 1 int 18
"TI PCIXX12 Smart Card" rev 0x00 at pci3 dev 6 function 4 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x10, lattimer 0x20
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, DVDRAM GSA-U10N, HP06> ATAPI 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x01: msi, AHCI 1.1
ahci0: port 0: 1.5Gb/s
scsibus2 at ahci0: 32 targets
sd0 at scsibus2 targ 0 lun 0: <ATA, ST500LM012 HN-M5, 2BA3> SCSI3 0/direct
fixed naa.50004cf2107a1e38
sd0: 476940MB, 512 bytes/sector, 976773168 sectors
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics touchpad, firmware 6.2
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
ugen0 at uhub2 port 1 "AuthenTec Fingerprint Sensor" rev 1.10/6.23 addr 2
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
sd1 at scsibus4 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
sd1: 473861MB, 512 bytes/sector, 970467600 sectors
softraid0: volume sd1 is roaming, it used to be sd2, updating metadata
root on sd1a (46bec6cd2747dbb1.a) swap on sd1b dump on sd1b
Any clues ?
As the problem is 100% reproductible, I am able to report additionnal
command output on request.
Thanks.
--
Sebastien Marie
