Some progress. I was able to pxeboot bsd.rd from an even newer
snapshot:
>> OpenBSD/amd64 PXEBOOT 3.28
boot> boot bsd.rd
booting tftp:bsd.rd: 3341596+1422336+2400952+0+598016
[72+441312+283361]=0x81a190
entry point at 0x1001000 [7205c766, 34000004, 24448b12, b440a304]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2016 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 6.0-current (RAMDISK_CD) #0: Mon Oct 31 09:01:35 MDT 2016
[email protected]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 6416760832 (6119MB)
avail mem = 6220574720 (5932MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xfcd30 (63 entries)
bios0: vendor American Megatrends Inc. version "1.0b" date 04/23/2009
bios0: Supermicro X8ST3
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP APIC MCFG SLIC ERST OEMB HPET DMAR SSDT EINJ BERT ERST
HEST
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz, 2660.32 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG,LAHF,PERF,ITSC,SENSOR
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: apic clock running at 132MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 8 (P0P1)
acpiprt2 at acpi0: bus 6 (P0P4)
acpiprt3 at acpi0: bus 7 (P0P5)
acpiprt4 at acpi0: bus -1 (P0P6)
acpiprt5 at acpi0: bus -1 (P0P7)
acpiprt6 at acpi0: bus -1 (P0P8)
acpiprt7 at acpi0: bus -1 (P0P9)
acpiprt8 at acpi0: bus 1 (NPE1)
acpiprt9 at acpi0: bus -1 (NPE2)
acpiprt10 at acpi0: bus 2 (NPE3)
acpiprt11 at acpi0: bus -1 (NPE4)
acpiprt12 at acpi0: bus 3 (NPE5)
acpiprt13 at acpi0: bus -1 (NPE6)
acpiprt14 at acpi0: bus 4 (NPE7)
acpiprt15 at acpi0: bus -1 (NPE8)
acpiprt16 at acpi0: bus 5 (NPE9)
acpiprt17 at acpi0: bus -1 (NPEA)
acpicpu at acpi0 not configured
"PNP0501" at acpi0 not configured
"PNP0501" at acpi0 not configured
"PNP0C0C" at acpi0 not configured
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel X58 Host" rev 0x13
ppb0 at pci0 dev 1 function 0 "Intel X58 PCIE" rev 0x13: msi
pci1 at ppb0 bus 1
ppb1 at pci0 dev 3 function 0 "Intel X58 PCIE" rev 0x13: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 5 function 0 "Intel X58 PCIE" rev 0x13: msi
pci3 at ppb2 bus 3
ppb3 at pci0 dev 7 function 0 "Intel X58 PCIE" rev 0x13: msi
pci4 at ppb3 bus 4
ppb4 at pci0 dev 9 function 0 "Intel X58 PCIE" rev 0x13: msi
pci5 at ppb4 bus 5
"Intel X58 Misc" rev 0x13 at pci0 dev 20 function 0 not configured
"Intel X58 GPIO" rev 0x13 at pci0 dev 20 function 1 not configured
"Intel X58 RAS" rev 0x13 at pci0 dev 20 function 2 not configured
"Intel X58 Throttle" rev 0x13 at pci0 dev 20 function 3 not configured
"Intel X58 QuickData" rev 0x13 at pci0 dev 22 function 0 not configured
"Intel X58 QuickData" rev 0x13 at pci0 dev 22 function 1 not configured
"Intel X58 QuickData" rev 0x13 at pci0 dev 22 function 2 not configured
"Intel X58 QuickData" rev 0x13 at pci0 dev 22 function 3 not configured
"Intel X58 QuickData" rev 0x13 at pci0 dev 22 function 4 not configured
"Intel X58 QuickData" rev 0x13 at pci0 dev 22 function 5 not configured
"Intel X58 QuickData" rev 0x13 at pci0 dev 22 function 6 not configured
"Intel X58 QuickData" rev 0x13 at pci0 dev 22 function 7 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801JI USB" rev 0x00: apic 8 int 16
uhci1 at pci0 dev 26 function 1 "Intel 82801JI USB" rev 0x00: apic 8 int 21
uhci2 at pci0 dev 26 function 2 "Intel 82801JI USB" rev 0x00: apic 8 int 19
ehci0 at pci0 dev 26 function 7 "Intel 82801JI USB" rev 0x00: apic 8 int 18
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
ppb5 at pci0 dev 28 function 0 "Intel 82801JI PCIE" rev 0x00: msi
pci6 at ppb5 bus 6
em0 at pci6 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address
00:30:48:bb:02:d8
ppb6 at pci0 dev 28 function 1 "Intel 82801JI PCIE" rev 0x00: msi
pci7 at ppb6 bus 7
em1 at pci7 dev 0 function 0 "Intel 82574L" rev 0x00: msi, address
00:30:48:bb:02:d9
uhci3 at pci0 dev 29 function 0 "Intel 82801JI USB" rev 0x00: apic 8 int 23
uhci4 at pci0 dev 29 function 1 "Intel 82801JI USB" rev 0x00: apic 8 int 19
uhci5 at pci0 dev 29 function 2 "Intel 82801JI USB" rev 0x00: apic 8 int 18
ehci1 at pci0 dev 29 function 7 "Intel 82801JI USB" rev 0x00: apic 8 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00
addr 1
ppb7 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x90
pci8 at ppb7 bus 8
ppb8 at pci8 dev 0 function 0 "Pericom PI7C21P100 PCIX-PCIX" rev 0x01
pci9 at ppb8 bus 9
em2 at pci9 dev 4 function 0 "Intel 82546GB" rev 0x03: apic 8 int 16, address
00:0e:0c:eb:30:84
em3 at pci9 dev 4 function 1 "Intel 82546GB" rev 0x03: apic 8 int 17, address
00:0e:0c:eb:30:85
em4 at pci9 dev 6 function 0 "Intel 82546GB" rev 0x03: apic 8 int 18, address
00:0e:0c:eb:30:86
em5 at pci9 dev 6 function 1 "Intel 82546GB" rev 0x03: apic 8 int 19, address
00:0e:0c:eb:30:87
ppb9 at pci8 dev 1 function 0 "IBM 133 PCIX-PCIX" rev 0x02
pci10 at ppb9 bus 10
em6 at pci10 dev 4 function 0 "Intel 82546EB" rev 0x01: apic 8 int 17, address
00:04:23:ba:a8:0c
em7 at pci10 dev 4 function 1 "Intel 82546EB" rev 0x01: apic 8 int 18, address
00:04:23:ba:a8:0d
em8 at pci10 dev 6 function 0 "Intel 82546EB" rev 0x01: apic 8 int 19, address
00:04:23:ba:a8:0e
em9 at pci10 dev 6 function 1 "Intel 82546EB" rev 0x01: apic 8 int 16, address
00:04:23:ba:a8:0f
vga1 at pci8 dev 4 function 0 "Matrox MGA G200eW" rev 0x0a
wsdisplay1 at vga1 mux 1: console (80x25, vt100 emulation)
"Intel 82801JIR LPC" rev 0x00 at pci0 dev 31 function 0 not configured
ahci0 at pci0 dev 31 function 2 "Intel 82801JI AHCI" rev 0x00: msi, AHCI 1.2
ahci0: port 0: 3.0Gb/s
ahci0: port 1: 3.0Gb/s
ahci0: port 2: 3.0Gb/s
ahci0: port 3: 3.0Gb/s
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, Samsung SSD 850, EMT0> SCSI3 0/direct fixed
naa.5002538da02788ba
sd0: 114473MB, 512 bytes/sector, 234441648 sectors, thin
sd1 at scsibus0 targ 1 lun 0: <ATA, ST31500341AS, CC1H> SCSI3 0/direct fixed
naa.5000c500153d9e68
sd1: 1430799MB, 512 bytes/sector, 2930277168 sectors
sd2 at scsibus0 targ 2 lun 0: <ATA, ST3000VN000-1HJ1, SC60> SCSI3 0/direct
fixed naa.5000c5008b0ef375
sd2: 2861588MB, 512 bytes/sector, 5860533168 sectors
sd3 at scsibus0 targ 3 lun 0: <ATA, ST2000VM002-9UY1, SC01> SCSI3 0/direct
fixed naa.5000c50037db7792
sd3: 1907729MB, 512 bytes/sector, 3907029168 sectors
"Intel 82801JI SMBus" rev 0x00 at pci0 dev 31 function 3 not configured
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 configuration 1 interface 0 "Intel UHCI root hub" rev 1.00/1.00
addr 1
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay1
"Prolific Technology Inc. USB-Serial Controller" rev 1.10/3.00 addr 2 at uhub2
port 1 not configured
softraid0 at root
scsibus1 at softraid0: 256 targets
PXE boot MAC address 00:30:48:bb:02:d8, interface em0
root on rd0a swap on rd0b dump on rd0b
Unfortunately, after an upgrade the installed bsd.mp kernel still
crashes:
>> OpenBSD/amd64 BOOT 3.33
boot>
booting hd0a:/bsd: 6927232+2204680+258112+0+671744 [72+732864+486505]=0xac4df8
entry point at 0x1001000 [7205c766, 34000004, 24448b12, 2ba0a304]
[ using 1220088 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2016 OpenBSD. All rights reserved. https://www.OpenBSD.org
OpenBSD 6.0-current (GENERIC.MP) #0: Mon Oct 31 08:56:52 MDT 2016
[email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 6416760832 (6119MB)
kernel: page fault trap, code=0
Stopped at uvm_map_uaddr+0x5d: movq 0x10(%rdx),%rax
ddb{0}> show panic
the kernel did not panic
ddb{0}> trace
uvm_map_uaddr() at uvm_map_uaddr+0x5d
uvm_mapent_free_remove() at uvm_mapent_free_remove+0x41
uvm_mapent_merge() at uvm_mapent_merge+0x46
uvm_mapent_tryjoin() at uvm_mapent_tryjoin+0xc4
uvm_map() at uvm_map+0x89a
uvm_km_kmemalloc_pla() at uvm_km_kmemalloc_pla+0xa4
malloc() at malloc+0x486
uvm_map_create() at uvm_map_create+0x3c
uvm_km_suballoc() at uvm_km_suballoc+0xd6
cpu_startup() at cpu_startup+0xac
main() at main+0x8a
end trace frame: 0x0, count: -11
ddb{0}> show register
rdi 0xffffffff81acacc0 +0xcacc0
rsi 0xffff800000014000 +0x14000
rbp 0xffffffff81acaad0 +0xcaad0
rbx 0xffffffff81acacc0 +0xcacc0
rdx 0x1000
rcx 0
rax 0xffffffff819469d0 +0x29c10
r8 0
r9 0x1323 +0x323
r10 0xffff800000014000 +0x14000
r11 0
r12 0xffffffff819469d0 +0x29c10
r13 0xffffff01bf7c9020
r14 0xffffffff81acac01 +0xcac01
r15 0xffffffff81acac20 +0xcac20
rip 0xffffffff812ce4ad +0x5d
cs 0x8
rflags 0x10206 +0x15e
rsp 0xffffffff81acaac0 +0xcaac0
ss 0x10
uvm_map_uaddr+0x5d: movq 0x10(%rdx),%rax
Tomorrow, I'll start trying older kernels to see if I can find one
that doesn't crash. If you have any suggestions in the mean time, I'm
all ears.
Cheers,
Paul 'WEiRD' de Weerd
On Tue, Nov 01, 2016 at 02:34:00PM +0100, Paul de Weerd wrote:
| Quick follow-up:
|
| boot(8) give the following for this machine's memory layout:
|
| boot> machine memory
| Region 0: type 1 at 0x0 for 632KB
| Region 1: type 2 at 0x9e000 for 8KB
| Region 2: type 2 at 0xe0000 for 128KB
| Region 3: type 1 at 0x100000 for 3136000KB
| Region 4: type 9 at 0xbf78e000 for 8KB
| Region 5: type 3 at 0xbf790000 for 56KB
| Region 6: type 4 at 0xbf79e000 for 200KB
| Region 7: type 2 at 0xbf7d0000 for 64KB
| Region 8: type 2 at 0xbf7ec000 for 80KB
| Region 9: type 2 at 0xbf800000 for 8192KB
| Region 10: type 2 at 0xfee00000 for 4KB
| Region 11: type 2 at 0xffc00000 for 4096KB
| Region 12: type 1 at 0x100000000 for 3145728KB
| Low ram: 632KB High ram: 3136000KB
| Total free memory: 6282360KB
|
| Cheers,
|
| Paul
|
| On Tue, Nov 01, 2016 at 02:26:40PM +0100, Paul de Weerd wrote:
| | Hi all,
| |
| | I just upgraded one of my machines to -current and was surprised that
| | it didn't come back after reboot. Here's what I found on the serial
| | console:
| |
| | >> OpenBSD/amd64 BOOT 3.33
| | boot>
| | booting hd0a:/bsd: 6926928+2204680+258112+0+671744
[72+732792+486466]=0xac4d88
| | entry point at 0x1001000 [7205c766, 34000004, 24448b12, 2ba0a304]
| | [ using 1219976 bytes of bsd ELF symbol table ]
| | Copyright (c) 1982, 1986, 1989, 1991, 1993
| | The Regents of the University of California. All rights reserved.
| | Copyright (c) 1995-2016 OpenBSD. All rights reserved.
https://www.OpenBSD.org
| |
| | OpenBSD 6.0-current (GENERIC.MP) #0: Sun Oct 30 10:38:08 MDT 2016
| | [email protected]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
| | real mem = 6416760832 (6119MB)
| | kernel: page fault trap, code=0
| | Stopped at uvm_map_uaddr+0x5d: movq 0x10(%rdx),%rax
| | ddb{0}> show panic
| | the kernel did not panic
| | ddb{0}> trace
| | uvm_map_uaddr() at uvm_map_uaddr+0x5d
| | uvm_mapent_free_remove() at uvm_mapent_free_remove+0x41
| | uvm_mapent_merge() at uvm_mapent_merge+0x46
| | uvm_mapent_tryjoin() at uvm_mapent_tryjoin+0xc4
| | uvm_map() at uvm_map+0x89a
| | uvm_km_kmemalloc_pla() at uvm_km_kmemalloc_pla+0xa4
| | malloc() at malloc+0x486
| | uvm_map_create() at uvm_map_create+0x3c
| | uvm_km_suballoc() at uvm_km_suballoc+0xd6
| | cpu_startup() at cpu_startup+0xac
| | main() at main+0x8a
| | end trace frame: 0x0, count: -11
| | ddb{0}> show register
| | rdi 0xffffffff81acacc0 +0xcacc0
| | rsi 0xffff800000014000 +0x14000
| | rbp 0xffffffff81acaad0 +0xcaad0
| | rbx 0xffffffff81acacc0 +0xcacc0
| | rdx 0x1000
| | rcx 0
| | rax 0xffffffff819469d0 +0x29c10
| | r8 0
| | r9 0x1323 +0x323
| | r10 0xffff800000014000 +0x14000
| | r11 0
| | r12 0xffffffff819469d0 +0x29c10
| | r13 0xffffff01bf7c9020
| | r14 0xffffffff81acac01 +0xcac01
| | r15 0xffffffff81acac20 +0xcac20
| | rip 0xffffffff812ce4ad +0x5d
| | cs 0x8
| | rflags 0x10206 +0x15e
| | rsp 0xffffffff81acaac0 +0xcaac0
| | ss 0x10
| | uvm_map_uaddr+0x5d: movq 0x10(%rdx),%rax
| | ddb{0}> ps
| | TID PPID PGRP UID S FLAGS WAIT COMMAND
| |
| | Trying to boot bsd.rd also fails with:
| |
| | >> OpenBSD/amd64 BOOT 3.33
| | boot> boot bsd.rd
| | booting hd0a:bsd.rd: 3341596+1422336+2400952+0+598016
[72+441312+283361]=0x81a190
| | entry point at 0x1001000 [7205c766, 34000004, 24448b12, b440a304]
| | Copyright (c) 1982, 1986, 1989, 1991, 1993
| | The Regents of the University of California. All rights reserved.
| | Copyright (c) 1995-2016 OpenBSD. All rights reserved.
https://www.OpenBSD.org
| |
| | OpenBSD 6.0-current (RAMDISK_CD) #0: Sun Oct 30 10:42:50 MDT 2016
| | [email protected]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
| | real mem = 6416760832 (6119MB)
| | avail mem = 6220574720 (5932MB)
| | mainbus0 at root
| | bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xfcd30 (63 entries)
| | bios0: vendor American Megatrends Inc. version "1.0b" date 04/23/2009
| | bios0: Supermicro X8ST3
| | acpi0 at bios0: rev 2
| | acpi0: tables DSDT FACP APIC MCFG SLIC ERST OEMB HPET DMAR SSDT EINJ BERT
ERST HEST
| | acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
| | cpu0 at mainbus0: apid 0 (boot processor)
| | cpu0: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz, 2660.31 MHz
| | cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG,LAHF,PERF,ITSC,SENSOR
| | cpu0: 256KB 64b/line 8-way L2 cache
| | cpu0: apic clock running at 132MHz
| | cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
| | cpu at mainbus0: not configured
| | cpu at mainbus0: not configured
| | cpu at mainbus0: not configured
| | cpu at mainbus0: not configured
| | cpu at mainbus0: not configured
| | cpu at mainbus0: not configured
| | cpu at mainbus0: not configured
| | ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
| | acpiprt0 at acpi0: bus 0 (PCI0)
| | acpiprt1 at acpi0: bus 8 (P0P1)
| | acpiprt2 at acpi0: bus 6 (P0P4)
| | acpiprt3 at acpi0: bus 7 (P0P5)
| | acpiprt4 at acpi0: bus -1 (P0P6)
| | acpiprt5 at acpi0: bus -1 (P0P7)
| | acpiprt6 at acpi0: bus -1 (P0P8)
| | acpiprt7 at acpi0: bus -1 (P0P9)
| | acpiprt8 at acpi0: bus 1 (NPE1)
| | acpiprt9 at acpi0: bus -1 (NPE2)
| | acpiprt10 at acpi0: bus 2 (NPE3)
| | acpiprt11 at acpi0: bus -1 (NPE4)
| | acpiprt12 at acpi0: bus 3 (NPE5)
| | acpiprt13 at acpi0: bus -1 (NPE6)
| | acpiprt14 at acpi0: bus 4 (NPE7)
| | acpiprt15 at acpi0: bus -1 (NPE8)
| | acpiprt16 at acpi0: bus 5 (NPE9)
| | acpiprt17 at acpi0: bus -1 (NPEA)
| | acpicpu at acpi0 not configured
| | "PNP0501" at acpi0 not configured
| | "PNP0501" at acpi0 not configured
| | "PNP0C0C" at acpi0 not configured
| | pci0 at mainbus0 bus 0
| | uvm_fault(0xffffffff816fc0c0, 0xfffffffc8120af7e, 0, 4) -> e
| | fatal page fault in supervisor mode
| | trap type 6 code 10 rip fffffffc8120af7e cs 8 rflags 10246 cr2
fffffffc8120af7e cpl e rsp ffffffff81805b58
| | panic: trap type 6, code=10, pc=fffffffc8120af7e
| |
| | The operating system has halted.
| | Please press any key to reboot.
| |
| |
| | My last chance was booting bsd.sp, the single processor kernel.
| | Sadly, that just reboots without any further output to the console:
| |
| | boot> boot bsd.sp
| | booting hd0a:bsd.sp: 6884272+2204680+256480+0+667648
[72+729768+484465]=0xab69e8
| | entry point at 0x1001000 [7205c766, 34000004, 24448b12, 6ba0a304]
| | 5,> OpenBSD/amd64 BOOT 3.33
| | boot> boot bsd.sp
| | booting hd0a:bsd.sp: 6884272+2204680+256480+0+667648
[72+729768+484465]=0xab69e8
| | entry point at 0x1001000 [7205c766, 34000004, 24448b12, 6ba0a304]
| | Uh>> OpenBSD/amd64 BOOT 3.33
| | boot>
| |
| |
| | (The '5,' and 'Uh' are output on the serial console when the machine
| | actually resets, they've always been there and have never been an
| | issue before)
| |
| | As I can't get into the machine anymore, I have no way to extract a
| | complete (older) dmesg. It was running 6.0 just fine before this
| | though.
| |
| | Should teach me to always keep an older kernel around for emergencies.
| |
| | Any ideas?
| |
| | Paul 'WEiRD' de Weerd
| |
| | --
| | >++++++++[<++++++++++>-]<+++++++.>+++[<------>-]<.>+++[<+
| | +++++++++++>-]<.>++[<------------>-]<+.--------------.[-]
| | http://www.weirdnet.nl/
| |
|
| --
| >++++++++[<++++++++++>-]<+++++++.>+++[<------>-]<.>+++[<+
| +++++++++++>-]<.>++[<------------>-]<+.--------------.[-]
| http://www.weirdnet.nl/
|
--
>++++++++[<++++++++++>-]<+++++++.>+++[<------>-]<.>+++[<+
+++++++++++>-]<.>++[<------------>-]<+.--------------.[-]
http://www.weirdnet.nl/
