On Tue (21/02/17), Dimitris Papastamos wrote:
> Hi,
>
> I have an alix2d13 and running 6.0-stable on it.
>
> I get this in dmesg:
>
> vr1 at pci0 dev 10 function 0 "VIA VT6105M RhineIII" rev 0x96: can't map
> interrupt
> vr2 at pci0 dev 11 function 0 "VIA VT6105M RhineIII" rev 0x96: can't map
> interrupt
>
> I think vr1 should map to irq 11 and vr2 to irq 15.
>
> I have tried the latest 0.99m bios and also 0.99h without success. I
> also booted bsd.rd from -current as well as bsd.rd from random OpenBSD
> versions going back to 5.0.
>
> So I am not sure this is an issue with OpenBSD (probably not in fact)
> but I would appreciate some pointers.
>
> If nothing else, I will try some other system on it and see if I have
> any success.
>
> OpenBSD 6.0-stable (GENERIC) #0: Mon Feb 13 22:06:28 GMT 2017
> [email protected]:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Geode(TM) Integrated Processor by AMD PCS ("AuthenticAMD" 586-class)
> 499 MHz
> cpu0: FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CFLUSH,MMX,MMXX,3DNOW2,3DNOW
> real mem = 267931648 (255MB)
> avail mem = 250146816 (238MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: date 11/05/08, BIOS32 rev. 0 @ 0xfd088
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
> pcibios0: pcibios_get_intr_routing - function not supported
> pcibios0: PCI IRQ Routing information unavailable.
> pcibios0: PCI bus #0 is the last bus
> bios0: ROM list: 0xe0000/0xa800
> cpu0 at mainbus0: (uniprocessor)
> mtrr: K6-family MTRR support (2 registers)
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 1 function 0 "AMD Geode LX" rev 0x33
> glxsb0 at pci0 dev 1 function 2 "AMD Geode LX Crypto" rev 0x00: RNG AES
> vr0 at pci0 dev 9 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 10, address
> 00:0d:b9:32:4c:a0
> ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI
> 0x004063, model 0x0034
> vr1 at pci0 dev 10 function 0 "VIA VT6105M RhineIII" rev 0x96: can't map
> interrupt
> vr2 at pci0 dev 11 function 0 "VIA VT6105M RhineIII" rev 0x96: can't map
> interrupt
> glxpcib0 at pci0 dev 15 function 0 "AMD CS5536 ISA" rev 0x03: rev 3, 32-bit
> 3579545Hz timer, watchdog, gpio, i2c
> gpio0 at glxpcib0: 32 pins
> iic0 at glxpcib0
> maxtmp0 at iic0 addr 0x4c: lm86
> pciide0 at pci0 dev 15 function 2 "AMD CS5536 IDE" rev 0x01: DMA, channel 0
> wired to compatibility, channel 1 wired to compatibility
> wd0 at pciide0 channel 0 drive 0: <SDCFHS-008G>
> wd0: 1-sector PIO, LBA48, 7647MB, 15662304 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> pciide0: channel 1 ignored (disabled)
> ohci0 at pci0 dev 15 function 4 "AMD CS5536 USB" rev 0x02: irq 12, version
> 1.0, legacy support
> ehci0 at pci0 dev 15 function 5 "AMD CS5536 USB" rev 0x02: irq 12
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "AMD EHCI root hub" rev 2.00/1.00 addr 1
> isa0 at glxpcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> com0: console
> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> usb1 at ohci0: USB revision 1.0
> uhub1 at usb1 "AMD OHCI root hub" rev 1.00/1.00 addr 1
> nvram: invalid checksum
> vscsi0 at root
> scsibus1 at vscsi0: 256 targets
> softraid0 at root
> scsibus2 at softraid0: 256 targets
> root on wd0a (c20bb005d7d65410.a) swap on wd0b dump on wd0b
> clock: unknown CMOS layout
Hello,
not sure if it helps, but I have no problems with 6.0-stable (mtier..) on my
2d13.
dmesg:
OpenBSD 6.0 (GENERIC) #2: Mon Oct 17 22:43:38 CEST 2016
[email protected]:/binpatchng/work-binpatch60-i386/src/sys/arch/i386/compile/GENERIC
cpu0: Geode(TM) Integrated Processor by AMD PCS ("AuthenticAMD" 586-class) 499
MHz
cpu0: FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CFLUSH,MMX,MMXX,3DNOW2,3DNOW
real mem = 267931648 (255MB)
avail mem = 250146816 (238MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 11/05/08, BIOS32 rev. 0 @ 0xfd088
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: pcibios_get_intr_routing - function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xe0000/0xa800
cpu0 at mainbus0: (uniprocessor)
mtrr: K6-family MTRR support (2 registers)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 1 function 0 "AMD Geode LX" rev 0x33
glxsb0 at pci0 dev 1 function 2 "AMD Geode LX Crypto" rev 0x00: RNG AES
vr0 at pci0 dev 9 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 10, address
00:0d:b9:26:50:88
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063,
model 0x0034
vr1 at pci0 dev 10 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 11, address
00:0d:b9:26:50:89
ukphy1 at vr1 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063,
model 0x0034
vr2 at pci0 dev 11 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 15, address
00:0d:b9:26:50:8a
ukphy2 at vr2 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063,
model 0x0034
glxpcib0 at pci0 dev 15 function 0 "AMD CS5536 ISA" rev 0x03: rev 3, 32-bit
3579545Hz timer, watchdog, gpio, i2c
gpio0 at glxpcib0: 32 pins
iic0 at glxpcib0
maxtmp0 at iic0 addr 0x4c: lm86
pciide0 at pci0 dev 15 function 2 "AMD CS5536 IDE" rev 0x01: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <TS4GCF133>
wd0: 1-sector PIO, LBA, 3823MB, 7831152 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ohci0 at pci0 dev 15 function 4 "AMD CS5536 USB" rev 0x02: irq 12, version 1.0,
legacy support
ehci0 at pci0 dev 15 function 5 "AMD CS5536 USB" rev 0x02: irq 12
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "AMD EHCI root hub" rev 2.00/1.00 addr 1
isa0 at glxpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "AMD OHCI root hub" rev 1.00/1.00 addr 1
nvram: invalid checksum
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (1ddb639fec2b5635.a) swap on wd0b dump on wd0b
clock: unknown CMOS layout
