Synopsis: Dell PowerEdge R710 boots with 6.0 but not 6.1
Category: kernel
Environment:
System : OpenBSD 6.0
Details : OpenBSD 6.0 (GENERIC.MP) #2319: Tue Jul 26 13:00:43 MDT
2016
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
Architecture: OpenBSD.amd64
Machine : amd64
Description:
I have run OpenBSD 6.0-stable on my Dell PowerEdge R710 for several
months without incident. Recently I attempted a fresh install of OpenBSD
6.1 on the machine, and the installation itself seemed successful, but I
can no longer boot...it gets as far as "savecore: no core dump" before
it stops progressing, and about 5 minutes later, shows a message in
white text on a blue background. I've experimented with different power
management settings in the BIOS and I've tried updating all the blobs,
neither improved the situation. Each time I boot I get a different
message:
1st try
<various boot messages>
savecore: no core dump
NMI ... going to debugger
Stopped at acpicpu_idle+0x22d: nop
ddb{1}> kernel: type -1735280128 trap, code=0
Faulted in DDB: continuing...
ddb{0}> kernel: type -1735280128 trap, code=0
Faulted in DDB: continuing...
ddb{0}>
2nd try
<various boot messages>
savecore: no core dump
NMI ... going to debugger
Stopped at 0xbf77dd006f3: addq $0x1,%rdx
ddb{1}>
3rd try
This time a bunch of the screen was covered in blocks of color, some of
which would cycle between different characters every second, always the
same blocks staying the same and the same ones changing. I could only
make out part of the message:
NMI
ped at cpu_idle+0x22d: nop
kernel:
I tried running sendbug as root, to capture the ACPI data, but on each
of 2 attempts, the acpidump process would peg the CPU for 10 minutes or
so before the machine would reboot.
I tried getting some more info out of DDB, but my keyboard wouldn't
work, maybe because its USB? I don't see a PS2 port on this machine so I
cannot try using a PS2 keyboard. It has a serial port, I tried
connecting to that using cu from a different machine, but I didn't see
any output.
How-To-Repeat:
Install OpenBSD 6.1 on a similarly configured Dell PowerEdge R710.
Reboot. Observe the issue--you cannot boot.
Fix:
Use the older OpenBSD 6.0-stable instead.
dmesg:
OpenBSD 6.0 (GENERIC.MP) #2319: Tue Jul 26 13:00:43 MDT 2016
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 34329825280 (32739MB)
avail mem = 33284927488 (31742MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xbf49c000 (84 entries)
bios0: vendor Dell Inc. version "6.4.0" date 07/23/2013
bios0: Dell Inc. PowerEdge R710
acpi0 at bios0: rev 2
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP APIC SPCR HPET DMAR MCFG WD__ SLIC ERST HEST BERT EINJ
TCPA SSDT
acpi0: wakeup devices PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 32 (boot processor)
cpu0: Intel(R) Xeon(R) CPU E5640 @ 2.67GHz, 2793.44 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 1
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 133MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
cpu1 at mainbus0: apid 0 (application processor)
cpu1: Intel(R) Xeon(R) CPU E5640 @ 2.67GHz, 1596.01 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 0, package 0
cpu2 at mainbus0: apid 34 (application processor)
cpu2: Intel(R) Xeon(R) CPU E5640 @ 2.67GHz, 2793.01 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 1, package 1
cpu3 at mainbus0: apid 2 (application processor)
cpu3: Intel(R) Xeon(R) CPU E5640 @ 2.67GHz, 1596.01 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 1, package 0
cpu4 at mainbus0: apid 50 (application processor)
cpu4: Intel(R) Xeon(R) CPU E5640 @ 2.67GHz, 2794.40 MHz
cpu4:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu4: 256KB 64b/line 8-way L2 cache
cpu4: smt 0, core 9, package 1
cpu5 at mainbus0: apid 18 (application processor)
cpu5: Intel(R) Xeon(R) CPU E5640 @ 2.67GHz, 1729.01 MHz
cpu5:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu5: 256KB 64b/line 8-way L2 cache
cpu5: smt 0, core 9, package 0
cpu6 at mainbus0: apid 52 (application processor)
cpu6: Intel(R) Xeon(R) CPU E5640 @ 2.67GHz, 2793.01 MHz
cpu6:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu6: 256KB 64b/line 8-way L2 cache
cpu6: smt 0, core 10, package 1
cpu7 at mainbus0: apid 20 (application processor)
cpu7: Intel(R) Xeon(R) CPU E5640 @ 2.67GHz, 1729.01 MHz
cpu7:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu7: 256KB 64b/line 8-way L2 cache
cpu7: smt 0, core 10, package 0
cpu8 at mainbus0: apid 33 (application processor)
cpu8: Intel(R) Xeon(R) CPU E5640 @ 2.67GHz, 2793.01 MHz
cpu8:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu8: 256KB 64b/line 8-way L2 cache
cpu8: smt 1, core 0, package 1
cpu9 at mainbus0: apid 1 (application processor)
cpu9: Intel(R) Xeon(R) CPU E5640 @ 2.67GHz, 1729.01 MHz
cpu9:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu9: 256KB 64b/line 8-way L2 cache
cpu9: smt 1, core 0, package 0
cpu10 at mainbus0: apid 35 (application processor)
cpu10: Intel(R) Xeon(R) CPU E5640 @ 2.67GHz, 2793.01 MHz
cpu10:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu10: 256KB 64b/line 8-way L2 cache
cpu10: smt 1, core 1, package 1
cpu11 at mainbus0: apid 3 (application processor)
cpu11: Intel(R) Xeon(R) CPU E5640 @ 2.67GHz, 1729.01 MHz
cpu11:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu11: 256KB 64b/line 8-way L2 cache
cpu11: smt 1, core 1, package 0
cpu12 at mainbus0: apid 51 (application processor)
cpu12: Intel(R) Xeon(R) CPU E5640 @ 2.67GHz, 2793.01 MHz
cpu12:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu12: 256KB 64b/line 8-way L2 cache
cpu12: smt 1, core 9, package 1
cpu13 at mainbus0: apid 19 (application processor)
cpu13: Intel(R) Xeon(R) CPU E5640 @ 2.67GHz, 1729.01 MHz
cpu13:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu13: 256KB 64b/line 8-way L2 cache
cpu13: smt 1, core 9, package 0
cpu14 at mainbus0: apid 53 (application processor)
cpu14: Intel(R) Xeon(R) CPU E5640 @ 2.67GHz, 2793.01 MHz
cpu14:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu14: 256KB 64b/line 8-way L2 cache
cpu14: smt 1, core 10, package 1
cpu15 at mainbus0: apid 21 (application processor)
cpu15: Intel(R) Xeon(R) CPU E5640 @ 2.67GHz, 1729.01 MHz
cpu15:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AES,NXE,PAGE1GB,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu15: 256KB 64b/line 8-way L2 cache
cpu15: smt 1, core 10, package 0
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0: apid 1 pa 0xfec80000, version 20, 24 pins
acpihpet0 at acpi0: 14318179 Hz
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (PEX1)
acpiprt2 at acpi0: bus 2 (PEX3)
acpiprt3 at acpi0: bus 3 (PEX4)
acpiprt4 at acpi0: bus 4 (PEX5)
acpiprt5 at acpi0: bus 5 (PEX6)
acpiprt6 at acpi0: bus 6 (PEX7)
acpiprt7 at acpi0: bus 7 (PEX9)
acpiprt8 at acpi0: bus -1 (PEXA)
acpiprt9 at acpi0: bus -1 (SBEX)
acpiprt10 at acpi0: bus 8 (COMP)
acpicpu0 at acpi0: C3(350@96 mwait.1@0x20), C1(1000@1 mwait.1)
acpicpu1 at acpi0: C3(350@96 mwait.1@0x20), C1(1000@1 mwait.1)
acpicpu2 at acpi0: C3(350@96 mwait.1@0x20), C1(1000@1 mwait.1)
acpicpu3 at acpi0: C3(350@96 mwait.1@0x20), C1(1000@1 mwait.1)
acpicpu4 at acpi0: C3(350@96 mwait.1@0x20), C1(1000@1 mwait.1)
acpicpu5 at acpi0: C3(350@96 mwait.1@0x20), C1(1000@1 mwait.1)
acpicpu6 at acpi0: C3(350@96 mwait.1@0x20), C1(1000@1 mwait.1)
acpicpu7 at acpi0: C3(350@96 mwait.1@0x20), C1(1000@1 mwait.1)
acpicpu8 at acpi0: C3(350@96 mwait.1@0x20), C1(1000@1 mwait.1)
acpicpu9 at acpi0: C3(350@96 mwait.1@0x20), C1(1000@1 mwait.1)
acpicpu10 at acpi0: C3(350@96 mwait.1@0x20), C1(1000@1 mwait.1)
acpicpu11 at acpi0: C3(350@96 mwait.1@0x20), C1(1000@1 mwait.1)
acpicpu12 at acpi0: C3(350@96 mwait.1@0x20), C1(1000@1 mwait.1)
acpicpu13 at acpi0: C3(350@96 mwait.1@0x20), C1(1000@1 mwait.1)
acpicpu14 at acpi0: C3(350@96 mwait.1@0x20), C1(1000@1 mwait.1)
acpicpu15 at acpi0: C3(350@96 mwait.1@0x20), C1(1000@1 mwait.1)
"PNP0C33" at acpi0 not configured
"ACPI000D" at acpi0 not configured
"PNP0501" at acpi0 not configured
"PNP0501" at acpi0 not configured
"IPI0001" at acpi0 not configured
"PNP0C14" at acpi0 not configured
ipmi at mainbus0 not configured
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 5520 Host" rev 0x13
ppb0 at pci0 dev 1 function 0 "Intel X58 PCIE" rev 0x13
pci1 at ppb0 bus 1
bnx0 at pci1 dev 0 function 0 "Broadcom BCM5709" rev 0x20: apic 1 int 4
bnx1 at pci1 dev 0 function 1 "Broadcom BCM5709" rev 0x20: apic 1 int 16
ppb1 at pci0 dev 3 function 0 "Intel X58 PCIE" rev 0x13
pci2 at ppb1 bus 2
bnx2 at pci2 dev 0 function 0 "Broadcom BCM5709" rev 0x20: apic 1 int 0
bnx3 at pci2 dev 0 function 1 "Broadcom BCM5709" rev 0x20: apic 1 int 10
ppb2 at pci0 dev 4 function 0 "Intel X58 PCIE" rev 0x13
pci3 at ppb2 bus 3
mfi0 at pci3 dev 0 function 0 "Symbios Logic MegaRAID SAS2108 GEN2" rev 0x05:
apic 1 int 1
mfi0: "PERC H700 Integrated", firmware 12.10.7-0001, 512MB cache
scsibus1 at mfi0: 64 targets
sd0 at scsibus1 targ 0 lun 0: <DELL, PERC H700, 2.10> SCSI3 0/direct fixed
naa.6d4ae5206e74fe0020053d89b9f0e30b
sd0: 28613120MB, 512 bytes/sector, 58599669760 sectors
ppb3 at pci0 dev 5 function 0 "Intel X58 PCIE" rev 0x13: msi
pci4 at ppb3 bus 4
vga1 at pci4 dev 0 function 0 vendor "NVIDIA", unknown product 0x128b rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
azalia0 at pci4 dev 0 function 1 vendor "NVIDIA", unknown product 0x0e0f rev
0xa1: msi
azalia0: no supported codecs
ppb4 at pci0 dev 6 function 0 "Intel X58 PCIE" rev 0x13: msi
pci5 at ppb4 bus 5
ppb5 at pci0 dev 7 function 0 "Intel X58 PCIE" rev 0x13: msi
pci6 at ppb5 bus 6
ppb6 at pci0 dev 9 function 0 "Intel X58 PCIE" rev 0x13: msi
pci7 at ppb6 bus 7
ahci0 at pci7 dev 0 function 0 vendor "ASMedia", unknown product 0x0625 rev
0x01: msi, AHCI 1.3.1
ahci0: port busy after first PMP probe FIS
ahci0: port busy after first PMP probe FIS
ahci0: port 1: 6.0Gb/s
scsibus2 at ahci0: 32 targets
sd1 at scsibus2 targ 1 lun 0: <ATA, KINGSTON SUV400S, 0C3J> SCSI3 0/direct
fixed naa.0550380440010000
sd1: 114473MB, 512 bytes/sector, 234441648 sectors, thin
"Intel X58 Misc" rev 0x13 at pci0 dev 20 function 0 not configured
"Intel X58 GPIO" rev 0x13 at pci0 dev 20 function 1 not configured
"Intel X58 RAS" rev 0x13 at pci0 dev 20 function 2 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 0 int 17
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 0 int 18
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: apic 0 int 19
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
uhci2 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 0 int 21
uhci3 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 0 int 20
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 0 int 21
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb7 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
pci8 at ppb7 bus 8
pcib0 at pci0 dev 31 function 0 "Intel 82801IB LPC" rev 0x02
pciide0 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA, channel 0
configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 0 int 23 for native-PCI interrupt
atapiscsi0 at pciide0 channel 0 drive 0
scsibus3 at atapiscsi0: 2 targets
cd0 at scsibus3 targ 0 lun 0: <PLDS, DVD-ROM DS-8D3SH, HD51> ATAPI 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
uhub6 at uhub0 port 3 "Standard Microsystems product 0x2514" rev 2.00/0.00 addr
2
umass0 at uhub6 port 3 configuration 1 interface 0 "Samsung Flash Drive FIT"
rev 2.10/11.00 addr 3
umass0: using SCSI over Bulk-Only
scsibus4 at umass0: 2 targets, initiator 0
sd2 at scsibus4 targ 1 lun 0: <Samsung, Flash Drive FIT, 1100> SCSI4 0/direct
removable serial.090c1000116040001244
sd2: 122368MB, 512 bytes/sector, 250609664 sectors
uhidev0 at uhub2 port 1 configuration 1 interface 0 "Logitech product 0xc534"
rev 2.00/1.01 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub2 port 1 configuration 1 interface 1 "Logitech product 0xc534"
rev 2.00/1.01 addr 2
uhidev1: iclass 3/0, 2 report ids
ums0 at uhidev1 reportid 1: 5 buttons, Z dir
wsmouse0 at ums0 mux 0
ums1 at uhidev1 reportid 2: 5 buttons, Z dir
wsmouse1 at ums1 mux 0
vscsi0 at root
scsibus5 at vscsi0: 256 targets
softraid0 at root
scsibus6 at softraid0: 256 targets
root on sd2a (652eaa61d557fe21.a) swap on sd2b dump on sd2b
WARNING: / was not properly unmounted
bnx0: address d4:ae:52:65:a4:b2
brgphy0 at bnx0 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
bnx1: address d4:ae:52:65:a4:b4
brgphy1 at bnx1 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
bnx2: address d4:ae:52:65:a4:b6
brgphy2 at bnx2 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
bnx3: address d4:ae:52:65:a4:b8
brgphy3 at bnx3 phy 1: BCM5709 10/100/1000baseT PHY, rev. 8
WARNING: R/W mount of /mnt denied. Filesystem is not clean - run fsck
usbdevs:
Controller /dev/usb0:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
port 3 addr 2: high speed, self powered, config 1, product 0x2514(0x2514),
Standard Microsystems(0x0424), rev 0.00
port 1 powered
port 2 powered
port 3 addr 3: high speed, power 300 mA, config 1, Flash Drive FIT(0x1000),
Samsung(0x090c), rev 11.00, iSerialNumber 0374116040001244
port 4 powered
Controller /dev/usb1:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
port 3 powered
port 4 powered
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 addr 2: low speed, power 100 mA, config 1, product 0xc534(0xc534),
Logitech(0x046d), rev 1.01
port 2 powered
Controller /dev/usb3:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb4:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
Controller /dev/usb5:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x8086), rev 1.00
port 1 powered
port 2 powered
