Hi,
- I am currently using a lenovo thinkpad s540.
- After installed OpenBSD 6.2, at first boot, I must disable inteldrm
otherwise it does not work.
- Is there a solution to fix this anomaly?
- Below, my dmesg output:
cpiprt6 at acpi0: bus -1 (RP05)
acpiprt7 at acpi0: bus -1 (PEG0)
acpiprt8 at acpi0: bus -1 (PEG1)
acpiprt9 at acpi0: bus -1 (PEG2)
acpiec0 at acpi0
acpicpu0 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpitz0 at acpi0acpitz0: TZ01: failed to read _TMP
acpitz0: TZ01: failed to read _TMP
"INT3F0D" at acpi0 not configured
acpithinkpad0 at acpi0
acpibat0 at acpi0: BAT0 model "45N1167" serial 1060 type LiP oem "LGC"
acpiac0 at acpi0: AC unit online
"MSFT0001" at acpi0 not configured
"LEN2000" at acpi0 not configured
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: LID0
"MSFT9000" at acpi0 not configured
"MSFT9001" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C31" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout at acpivideo0 not configured
bios0: ROM list: 0xc0000/0xec00 0xcec00/0x1000
cpu0: Enhanced SpeedStep 1697 MHz: speeds: 1701, 1700, 1600, 1500, 1400,
1300, 1200, 1100, 1000, 900, 800, 782 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel Core 4G Host" rev 0x09
vga1 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x09
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
azalia0 at pci0 dev 3 function 0 "Intel Core 4G HD Audio" rev 0x09: msi
azalia0: No codecs found
xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x04: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
"Intel 8 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
azalia1 at pci0 dev 27 function 0 "Intel 8 Series HD Audio" rev 0x04: msi
azalia1: codecs: Realtek/0x0283
audio0 at azalia1
ppb0 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xe4
pci1 at ppb0 bus 2
ppb1 at pci0 dev 28 function 1 "Intel 8 Series PCIE" rev 0xe4: apic 2 int 17
pci2 at ppb1 bus 3
re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x10: RTL8168GU/8111GU
(0x5080), msi, address 20:1a:06:5c:b0:1d
rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
ppb2 at pci0 dev 28 function 2 "Intel 8 Series PCIE" rev 0xe4: apic 2 int 18
pci3 at ppb2 bus 4
iwm0 at pci3 dev 0 function 0 "Intel Dual Band Wireless AC 7260" rev
0x73, msi
ppb3 at pci0 dev 28 function 3 "Intel 8 Series PCIE" rev 0xe4: apic 2 int 19
pci4 at ppb3 bus 5
rtsx0 at pci4 dev 0 function 0 "Realtek RTS5227 Card Reader" rev 0x01: msi
sdmmc0 at rtsx0: 4-bit
ehci0 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x04: apic 2 int 23
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel 8 Series LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x04: msi,
AHCI 1.3
ahci0: port 0: 6.0Gb/s
ahci0: port 1: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, HGST HTS725050A7, GH2Z> SCSI3
0/direct fixed naa.5000cca76ce80b81
sd0: 476940MB, 512 bytes/sector, 976773168 sectors
sd1 at scsibus1 targ 1 lun 0: <ATA, LITEONIT LSS-16L, DS42> SCSI3
0/direct fixed t10.ATA_LITEONIT_LSS-16L6G_S0C41154Z1ZSCA041235
sd1: 15272MB, 512 bytes/sector, 31277232 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 8 Series SMBus" rev 0x04: apic
2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics clickpad, firmware 8.1, 0x1e2b1 0x940300
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
vmm0 at mainbus0: VMX/EPT
uhub2 at uhub0 port 1 configuration 1 interface 0 "Alcor Micro product
0x6254" rev 2.00/1.00 addr 2
ulpt0 at uhub2 port 2 configuration 1 interface 0 "Brother Industries
product 0x01e8" rev 2.00/1.00 addr 3
ulpt0: using bi-directional mode
ugen0 at uhub2 port 2 configuration 1 "Brother Industries product
0x01e8" rev 2.00/1.00 addr 3
uhidev0 at uhub2 port 4 configuration 1 interface 0 "Lenovo ThinkPad USB
Laser Mouse" rev 2.00/0.08 addr 4
uhidev0: iclass 3/1, 1 report id
ums0 at uhidev0 reportid 1: 5 buttons, Z dir
wsmouse2 at ums0 mux 0
uhidev1 at uhub0 port 2 configuration 1 interface 0 "Lenovo ThinkPad
Compact USB Keyboard with TrackPoint" rev 2.00/3.00 addr 5
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub0 port 2 configuration 1 interface 1 "Lenovo ThinkPad
Compact USB Keyboard with TrackPoint" rev 2.00/3.00 addr 5
uhidev2: iclass 3/1, 22 report ids
ums1 at uhidev2 reportid 1: 5 buttons, Z and W dir
wsmouse3 at ums1 mux 0
uhid0 at uhidev2 reportid 16: input=2, output=0, feature=0
uhid1 at uhidev2 reportid 17: input=2, output=0, feature=0
uhid2 at uhidev2 reportid 19: input=8, output=8, feature=8
uhid3 at uhidev2 reportid 21: input=2, output=0, feature=0
uhid4 at uhidev2 reportid 22: input=2, output=0, feature=0
ugen1 at uhub0 port 4 "Intel product 0x07dc" rev 2.00/0.01 addr 6
sdmmc0: can't enable card
uvideo0 at uhub0 port 6 configuration 1 interface 0 "Vimicro corp.
Integrated Camera" rev 2.00/14.37 addr 7
video0 at uvideo0
ugen2 at uhub0 port 7 "Validity Sensors VFS5011 Fingerprint Reader" rev
1.10/0.78 addr 8
uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching
Hub" rev 2.00/0.04 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd2 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
sd2: 476937MB, 512 bytes/sector, 976767473 sectors
root on sd2a (3631c7ba4e2aa025.a) swap on sd2b dump on sd2b
iwm0: hw rev 0x140, fw ver 16.242414.0, address fc:f8:ae:15:23:4f
iwm0: could not disable beacon filter (error 35)
syncing disks... done
sd2 detached
rebooting...
OpenBSD 6.2-stable (GENERIC.MP) #0: Sun Oct 15 16:51:44 CEST 2017
olivier@delta:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Core(TM) i3-4010U CPU @ 1.70GHz ("GenuineIntel"
686-class) 1.60 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,PAGE1GB,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT
real mem = 3398987776 (3241MB)
avail mem = 3319754752 (3165MB)
User Kernel Config
UKC> disable inteldrm
250 inteldrm* disabled
UKC> quit
Continuing...
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 09/14/17, BIOS32 rev. 0 @ 0xfc200, SMBIOS rev.
2.7 @ 0xdce7d000 (71 entries)
bios0: vendor LENOVO version "GPET71WW (1.71 )" date 09/14/2017
bios0: LENOVO 20B3005AFR
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP SLIC ASF! HPET LPIT APIC MCFG SSDT SSDT SSDT
TCPA SSDT UEFI MSDM BATB FPDT UEFI DMAR
acpi0: wakeup devices P0P1(S4) EHC1(S3) EHC2(S3) XHC_(S3) HDEF(S4)
PXSX(S4) RP01(S4) PXSX(S5) RP02(S4) PXSX(S4) PEG0(S4) PEGP(S4) PEG1(S4)
PEG2(S4) LID0(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i3-4010U CPU @ 1.70GHz ("GenuineIntel"
686-class) 1.70 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,PAGE1GB,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i3-4010U CPU @ 1.70GHz ("GenuineIntel"
686-class) 1.70 GHz
cpu2:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,PAGE1GB,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i3-4010U CPU @ 1.70GHz ("GenuineIntel"
686-class) 1.70 GHz
cpu3:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,NXE,PAGE1GB,LONG,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,LAHF,ABM,PERF,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P1)
acpiprt2 at acpi0: bus 2 (RP01)
acpiprt3 at acpi0: bus 3 (RP02)
acpiprt4 at acpi0: bus 4 (RP03)
acpiprt5 at acpi0: bus 5 (RP04)
acpiprt6 at acpi0: bus -1 (RP05)
acpiprt7 at acpi0: bus -1 (PEG0)
acpiprt8 at acpi0: bus -1 (PEG1)
acpiprt9 at acpi0: bus -1 (PEG2)
acpiec0 at acpi0
acpicpu0 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpitz0 at acpi0acpitz0: TZ01: failed to read _TMP
acpitz0: TZ01: failed to read _TMP
"INT3F0D" at acpi0 not configured
acpithinkpad0 at acpi0
acpibat0 at acpi0: BAT0 model "45N1167" serial 1060 type LiP oem "LGC"
acpiac0 at acpi0: AC unit online
"MSFT0001" at acpi0 not configured
"LEN2000" at acpi0 not configured
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: LID0
"MSFT9000" at acpi0 not configured
"MSFT9001" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C31" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout at acpivideo0 not configured
bios0: ROM list: 0xc0000/0xec00 0xcec00/0x1000
cpu0: Enhanced SpeedStep 1697 MHz: speeds: 1701, 1700, 1600, 1500, 1400,
1300, 1200, 1100, 1000, 900, 800, 782 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel Core 4G Host" rev 0x09
vga1 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x09
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
azalia0 at pci0 dev 3 function 0 "Intel Core 4G HD Audio" rev 0x09: msi
azalia0: No codecs found
xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x04: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
"Intel 8 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
azalia1 at pci0 dev 27 function 0 "Intel 8 Series HD Audio" rev 0x04: msi
azalia1: codecs: Realtek/0x0283
audio0 at azalia1
ppb0 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xe4
pci1 at ppb0 bus 2
ppb1 at pci0 dev 28 function 1 "Intel 8 Series PCIE" rev 0xe4: apic 2 int 17
pci2 at ppb1 bus 3
re0 at pci2 dev 0 function 0 "Realtek 8168" rev 0x10: RTL8168GU/8111GU
(0x5080), msi, address 20:1a:06:5c:b0:1d
rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
ppb2 at pci0 dev 28 function 2 "Intel 8 Series PCIE" rev 0xe4: apic 2 int 18
pci3 at ppb2 bus 4
iwm0 at pci3 dev 0 function 0 "Intel Dual Band Wireless AC 7260" rev
0x73, msi
ppb3 at pci0 dev 28 function 3 "Intel 8 Series PCIE" rev 0xe4: apic 2 int 19
pci4 at ppb3 bus 5
rtsx0 at pci4 dev 0 function 0 "Realtek RTS5227 Card Reader" rev 0x01: msi
sdmmc0 at rtsx0: 4-bit
ehci0 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x04: apic 2 int 23
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel 8 Series LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x04: msi,
AHCI 1.3
ahci0: port 0: 6.0Gb/s
ahci0: port 1: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, HGST HTS725050A7, GH2Z> SCSI3
0/direct fixed naa.5000cca76ce80b81
sd0: 476940MB, 512 bytes/sector, 976773168 sectors
sd1 at scsibus1 targ 1 lun 0: <ATA, LITEONIT LSS-16L, DS42> SCSI3
0/direct fixed t10.ATA_LITEONIT_LSS-16L6G_S0C41154Z1ZSCA041235
sd1: 15272MB, 512 bytes/sector, 31277232 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 8 Series SMBus" rev 0x04: apic
2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics clickpad, firmware 8.1, 0x1e2b1 0x940300
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
vmm0 at mainbus0: VMX/EPT
uhub2 at uhub0 port 1 configuration 1 interface 0 "Alcor Micro product
0x6254" rev 2.00/1.00 addr 2
ulpt0 at uhub2 port 2 configuration 1 interface 0 "Brother Industries
product 0x01e8" rev 2.00/1.00 addr 3
ulpt0: using bi-directional mode
ugen0 at uhub2 port 2 configuration 1 "Brother Industries product
0x01e8" rev 2.00/1.00 addr 3
uhidev0 at uhub2 port 4 configuration 1 interface 0 "Lenovo ThinkPad USB
Laser Mouse" rev 2.00/0.08 addr 4
uhidev0: iclass 3/1, 1 report id
ums0 at uhidev0 reportid 1: 5 buttons, Z dir
wsmouse2 at ums0 mux 0
uhidev1 at uhub0 port 2 configuration 1 interface 0 "Lenovo ThinkPad
Compact USB Keyboard with TrackPoint" rev 2.00/3.00 addr 5
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub0 port 2 configuration 1 interface 1 "Lenovo ThinkPad
Compact USB Keyboard with TrackPoint" rev 2.00/3.00 addr 5
uhidev2: iclass 3/1, 22 report ids
ums1 at uhidev2 reportid 1: 5 buttons, Z and W dir
wsmouse3 at ums1 mux 0
uhid0 at uhidev2 reportid 16: input=2, output=0, feature=0
uhid1 at uhidev2 reportid 17: input=2, output=0, feature=0
uhid2 at uhidev2 reportid 19: input=8, output=8, feature=8
uhid3 at uhidev2 reportid 21: input=2, output=0, feature=0
uhid4 at uhidev2 reportid 22: input=2, output=0, feature=0
ugen1 at uhub0 port 4 "Intel product 0x07dc" rev 2.00/0.01 addr 6
sdmmc0: can't enable card
uvideo0 at uhub0 port 6 configuration 1 interface 0 "Vimicro corp.
Integrated Camera" rev 2.00/14.37 addr 7
video0 at uvideo0
ugen2 at uhub0 port 7 "Validity Sensors VFS5011 Fingerprint Reader" rev
1.10/0.78 addr 8
uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching
Hub" rev 2.00/0.04 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd2 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
sd2: 476937MB, 512 bytes/sector, 976767473 sectors
root on sd2a (3631c7ba4e2aa025.a) swap on sd2b dump on sd2b
iwm0: hw rev 0x140, fw ver 16.242414.0, address fc:f8:ae:15:23:4f
wskbd1: disconnecting from wsdisplay0
wskbd1 detached
ukbd0 detached
uhidev1 detached
wsmouse3 detached
ums1 detached
uhid0 detached
uhid1 detached
uhid2 detached
uhid3 detached
uhid4 detached
uhidev2 detached
umass0 at uhub0 port 11 configuration 1 interface 0 "Corsair Survivor
3.0" rev 3.00/1.00 addr 5
umass0: using SCSI over Bulk-Only
scsibus4 at umass0: 2 targets, initiator 0
sd3 at scsibus4 targ 1 lun 0: <Corsair, Survivor 3.0, 000A> SCSI4
0/direct removable serial.1b1c1a0a4552D8943F08
sd3: 15288MB, 512 bytes/sector, 31309824 sectors
Thank you for your good work.
- Olivier Regnier
