On Mon, Jan 01, 2018 at 04:52:45PM +0000, mer...@aaathats3as.com wrote: > Hello, > > OpenBSD 6.2 doesn't work well with the usb3 ports on my Thinkpad x230. > I tried to create a partition on a usb drive with XHCI_DEBUG enabled, > in hope it can be of help to find out what went wrong so that we can > improve xhci(4). No such issues with the usb2 port. > > I tested multiple usb drives and got similar results, below is just the > test case with one though. Please let me know if I should submit more > reports with other usb drives. > > Attached is the dmesg output after booting OpenBSD 6.2, plugging in the > usb drive, running "fdisk -iy sd2", creating a partition with disklabel > and running "newfs sd2a". "newfs" hangs, sometimes this happens on > "disklabel". I waited about 10 minutes after i got the following > message in newfs, before removing the drive and getting dmesg output: > > /dev/rsd2a: 118267.5MB in 242211936 sectors of 512 bytes > 585 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each > newfs: wtfs: write error on block 16: Input/output error > > dmesg: > > OpenBSD 6.2-stable (GENERIC.MP) #1: Fri Dec 29 14:31:06 UTC 2017 > anon@sage:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 8494604288 (8101MB) > avail mem = 8230137856 (7848MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xbff28020 (10 entries) > bios0: vendor coreboot version "CBET4000 4.6-196-g0fb6568" date 05/22/2017
Please retest using stock BIOS and let us know how that works for you. -ml > bios0: LENOVO 2325YBN > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP SSDT MCFG TCPA APIC DMAR HPET > acpi0: wakeup devices HDEF(S4) EHC1(S4) EHC2(S4) XHC_(S4) SLPB(S3) LID_(S3) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz, 2594.46 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT > cpu0: 256KB 64b/line 8-way L2 cache > cpu0: TSC frequency 2594455560 Hz > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > cpu0: apic clock running at 99MHz > cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz, 2594.11 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT > cpu1: 256KB 64b/line 8-way L2 cache > cpu1: smt 1, core 0, package 0 > cpu2 at mainbus0: apid 2 (application processor) > cpu2: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz, 2594.11 MHz > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT > cpu2: 256KB 64b/line 8-way L2 cache > cpu2: smt 0, core 1, package 0 > cpu3 at mainbus0: apid 3 (application processor) > cpu3: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz, 2594.11 MHz > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT > cpu3: 256KB 64b/line 8-way L2 cache > cpu3: smt 1, core 1, package 0 > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > acpihpet0 at acpi0: 14318179 Hz > acpiprt0 at acpi0: bus 1 (RP01) > acpiprt1 at acpi0: bus 2 (RP02) > acpiprt2 at acpi0: bus 3 (RP03) > acpiprt3 at acpi0: bus -1 (RP04) > acpiprt4 at acpi0: bus -1 (RP05) > acpiprt5 at acpi0: bus -1 (RP06) > acpiprt6 at acpi0: bus -1 (RP07) > acpiprt7 at acpi0: bus -1 (RP08) > acpiprt8 at acpi0: bus 0 (PCI0) > acpiec0 at acpi0 > acpicpu0 at acpi0: C3(200@90 mwait.1@0x30), C2(500@63 mwait.1@0x10), > C1(1000@1 mwait.1), PSS > acpicpu1 at acpi0: C3(200@90 mwait.1@0x30), C2(500@63 mwait.1@0x10), > C1(1000@1 mwait.1), PSS > acpicpu2 at acpi0: C3(200@90 mwait.1@0x30), C2(500@63 mwait.1@0x10), > C1(1000@1 mwait.1), PSS > acpicpu3 at acpi0: C3(200@90 mwait.1@0x30), C2(500@63 mwait.1@0x10), > C1(1000@1 mwait.1), PSS > acpitz0 at acpi0: critical temperature is 127 degC > acpitz1 at acpi0: critical temperature is 99 degC > acpithinkpad0 at acpi0 > acpiac0 at acpi0: AC unit offline > acpibat0 at acpi0: BAT0 model "45N1029" serial 17063 type LION oem "LGC" > acpibat1 at acpi0: BAT1 not present > acpibtn0 at acpi0: SLPB > acpibtn1 at acpi0: LID_ > "PNP0F13" at acpi0 not configured > "BOOT0000" at acpi0 not configured > acpivideo0 at acpi0: GFX0 > acpivout0 at acpivideo0: LCD0 > cpu0: Enhanced SpeedStep 2594 MHz: speeds: 2601, 2600, 2400, 2200, 2000, > 1800, 1600, 1400, 1200 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09 > inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09 > drm0 at inteldrm0 > inteldrm0: msi > inteldrm0: 1366x768, 32bpp > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) > wsdisplay0: screen 1-5 added (std, vt100 emulation) > "Intel Core 3G Thermal" rev 0x09 at pci0 dev 4 function 0 not configured > xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi > xhci0: xHCI version 1.0 > xhci0: CAPLENGTH=0x80 > xhci0: DOORBELL=0x3000 > xhci0: RUNTIME=0x2000 > xhci0: 32 bytes context > xhci0: supported page size 0x00000001 > xhci0: 8 ports and 32 slots > xhci0: 16 scratch pages > xhci0: USB3PRM / USB3.0 configurable ports: 0x0000000f > xhci0: USB3_PSSEN / Enabled USB3.0 ports under xHCI: 0x0000000f > xhci0: XUSB2PRM / USB2.0 ports can switch from EHCI to xHCI:0x0000000f > xhci0: XUSB2PR / USB2.0 ports under xHCI: 0x0000000f > usb0 at xhci0: USB revision 3.0 > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev > 3.00/1.00 addr 1 > xhci0: DCBAAP=00x1d61000 > xhci0: CRCR=00 (0000000001d62000) > xhci0: ERSTBA=00xbff05000 > xhci0: ERDP=00x1d63000 > xhci0: USBCMD=0x5 > xhci0: IMAN=0x2 > "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured > em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address > 3c:97:0e:b7:ad:91 > ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 21 > usb1 at ehci0: USB revision 2.0 > uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev > 2.00/1.00 addr 1 > azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi > azalia0: codecs: Realtek ALC269, Intel/0x2806, using Realtek ALC269 > audio0 at azalia0 > ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4 > pci1 at ppb0 bus 1 > sdhc0 at pci1 dev 0 function 0 "Ricoh 5U823 SD/MMC" rev 0x04: apic 2 int 16 > sdhc0: SDHC 3.0, 50 MHz base clock > sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma > ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4 > pci2 at ppb1 bus 2 > athn0 at pci2 dev 0 function 0 "Atheros AR9285" rev 0x01: apic 2 int 17 > athn0: AR9285 rev 2 (1T1R), ROM rev 14, address 64:27:37:14:46:5f > ppb2 at pci0 dev 28 function 2 "Intel 7 Series PCIE" rev 0xc4: msi > pci3 at ppb2 bus 3 > ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 19 > usb2 at ehci1: USB revision 2.0 > uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev > 2.00/1.00 addr 1 > pcib0 at pci0 dev 31 function 0 "Intel QM77 LPC" rev 0x04 > ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI > 1.3 > ahci0: port 0: 6.0Gb/s > scsibus1 at ahci0: 32 targets > sd0 at scsibus1 targ 0 lun 0: <ATA, SAMSUNG MZ7TD256, DXT0> SCSI3 0/direct > fixed naa.5002538500000000 > sd0: 244198MB, 512 bytes/sector, 500118192 sectors, thin > ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 2 > int 23 > iic0 at ichiic0 > iic0: addr 0x24 03=04 09=41 0a=46 0b=16 0c=06 0d=29 0e=12 0f=17 words > 00=00ff 01=00ff 02=00ff 03=04ff 04=00ff 05=00ff 06=00ff 07=00ff > spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM > spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-12800 SO-DIMM > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pms0 at pckbc0 (aux slot) > wsmouse0 at pms0 mux 0 > wsmouse1 at pms0 mux 0 > pms0: Synaptics clickpad, firmware 8.1, 0x1e2b1 0x940300 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > vmm0 at mainbus0: VMX/EPT > error: [drm:pid0:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch fifo > underrun on pch transcoder A > error: [drm:pid0:intel_pch_fifo_underrun_irq_handler] *ERROR* PCH transcoder > A FIFO underrun > uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" > rev 2.00/0.00 addr 2 > ugen0 at uhub3 port 4 "Broadcom Corp BCM20702A0" rev 2.00/1.12 addr 3 > uvideo0 at uhub3 port 6 configuration 1 interface 0 "Chicony Electronics > Co., Ltd. Integrated Camera" rev 2.00/5.20 addr 4 > video0 at uvideo0 > uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" > rev 2.00/0.00 addr 2 > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed > sd1: 244190MB, 512 bytes/sector, 500102858 sectors > root on sd1a (d8858b99176db494.a) swap on sd1b dump on sd1b > xhci0: port=6 change=0x40 > xhci0: port=6 change=0x40 > xhci0: xhci_cmd_slot_control > xhci0: dev 1, input=0xffffff0002080000 slot=0xffffff0002080020 > ep0=0xffffff0002080040 > xhci0: dev 1, setting DCBAA to 0x0000000002081000 > xhci_pipe_init: pipe=0xffff800000b50000 addr=0 depth=1 port=6 speed=4 dev 1 > dci 1 (epAddr=0x0) > xhci0: xhci_cmd_set_address BSR=1 > xhci0: xhci_cmd_set_address BSR=0 > xhci0: dev 1 addr 1 > umass0 at uhub0 port 6 configuration 1 interface 0 "Kingston DT Elite G2" > rev 3.10/1.00 addr 2 > umass0: using SCSI over Bulk-Only > xhci_pipe_init: pipe=0xffff800000ba6000 addr=2 depth=1 port=6 speed=4 dev 1 > dci 4 (epAddr=0x2) > xhci0: xhci_cmd_configure_ep dev 1 > xhci_pipe_init: pipe=0xffff800000ba7000 addr=2 depth=1 port=6 speed=4 dev 1 > dci 3 (epAddr=0x81) > xhci0: xhci_cmd_configure_ep dev 1 > scsibus4 at umass0: 2 targets, initiator 0 > sd2 at scsibus4 targ 1 lun 0: <Kingston, DT Elite G2, PMAP> SCSI4 0/direct > removable serial.095116d5E191220809AC > sd2: 118272MB, 512 bytes/sector, 242221056 sectors > xhci_abort_xfer: xfer=0xffffff023a1f81e0 status=IN_PROGRESS err=TIMEOUT > actlen=0 len=8192 idx=67 > xhci0: xhci_cmd_stop_ep dev 1 dci 4 > xhci_event_xfer: stopped xfer=0xffffff023a1f81e0 > xhci0: xhci_cmd_set_tr_deq_async dev 1 dci 4 > xhci0: txerr? code 4 > xhci_abort_xfer: xfer=0xffffff023a1f80f0 status=IN_PROGRESS err=TIMEOUT > actlen=0 len=31 idx=69 > xhci0: xhci_cmd_stop_ep dev 1 dci 4 > xhci0: event error code=19, result=33 > trb=0xffff800032dc4120 (0x0000000001d62070 0x13000000 0x1008400) > xhci0: error stopping endpoint > xhci0: xhci_cmd_set_tr_deq_async dev 1 dci 4 > xhci_abort_xfer: xfer=0xffffff023a1f80f0 status=IN_PROGRESS err=TIMEOUT > actlen=0 len=31 idx=70 > xhci0: xhci_cmd_stop_ep dev 1 dci 4 > xhci0: event error code=19, result=33 > trb=0xffff800032dc4120 (0x0000000001d62090 0x13000000 0x1008400) > xhci0: error stopping endpoint > xhci0: xhci_cmd_set_tr_deq_async dev 1 dci 4 > xhci_abort_xfer: xfer=0xffffff023a1f80f0 status=IN_PROGRESS err=TIMEOUT > actlen=0 len=31 idx=71 > xhci0: xhci_cmd_stop_ep dev 1 dci 4 > xhci0: event error code=19, result=33 > trb=0xffff800032dc4120 (0x0000000001d620b0 0x13000000 0x1008400) > xhci0: error stopping endpoint > xhci0: xhci_cmd_set_tr_deq_async dev 1 dci 4 > xhci_abort_xfer: xfer=0xffffff023a1f80f0 status=IN_PROGRESS err=TIMEOUT > actlen=0 len=31 idx=72 > xhci0: xhci_cmd_stop_ep dev 1 dci 4 > xhci0: event error code=19, result=33 > trb=0xffff800032dc4120 (0x0000000001d620d0 0x13000000 0x1008400) > xhci0: error stopping endpoint > xhci0: xhci_cmd_set_tr_deq_async dev 1 dci 4 > xhci0: port=6 change=0x40 > xhci_abort_xfer: xfer=0xffffff023a1f80f0 status=IN_PROGRESS err=CANCELLED > actlen=0 len=31 idx=73 > xhci0: xhci_cmd_stop_ep dev 1 dci 4 > xhci0: event error code=19, result=33 > trb=0xffff800032dca0a0 (0x0000000001d62000 0x13000000 0x1008400) > xhci0: error stopping endpoint > xhci0: xhci_cmd_set_tr_deq_async dev 1 dci 4 > sd2 detached > scsibus4 detached > xhci0: xhci_cmd_configure_ep dev 1 > xhci0: xhci_cmd_configure_ep dev 1 > umass0 detached > xhci0: xhci_cmd_configure_ep dev 1 > xhci0: xhci_cmd_slot_control > > Thank you for reading my bug report. > -merino >
