Hi,
I recently received a pine64 board for doing Rust work on it (thanks
danj@) and I have some problems with it.
One of them is random crash or dead-lock when running rustc, which is a
multi-threaded program.
I dunno how to debug it, but the difference between running on bsd.mp
(the default) or bsd.sp is important.
with bsd.mp:
- rustc could terminate with random SIGBART/SIGILL
- rustc could end in dead-lock (5 actives threads: 4 in __thrsleep() and
1 in poll(INFTIM))
with bsd.sp:
- the build seems correct for now (it is still running)
The source code I build is large/complex: it is lang/rust port; and the
binary could be considered as "fragile" (it is a crosscompiled binary
from amd64) but it seems correct as it is fine with bsd.sp.
Below the dmesg of GENERIC.
--
Sebastien Marie
OpenBSD 6.3-current (GENERIC) #263: Sat Apr 28 23:21:01 MDT 2018
dera...@arm64.openbsd.org:/usr/src/sys/arch/arm64/compile/GENERIC
real mem = 2021466112 (1927MB)
avail mem = 1927962624 (1838MB)
mainbus0 at root: Pine64+
cpu0 at mainbus0 mpidr 0: ARM Cortex-A53 r0p4
efi0 at mainbus0: UEFI 2.7
efi0: Das U-Boot rev 0x0
psci0 at mainbus0: PSCI 0.2
agtimer0 at mainbus0: tick rate 24000 KHz
simplebus0 at mainbus0: "soc"
sxiccmu0 at simplebus0
sxipio0 at simplebus0: 103 pins
ampintc0 at simplebus0 nirq 224, ncpu 4: "interrupt-controller"
sxiccmu1 at simplebus0
sxipio1 at simplebus0: 13 pins
sximmc0 at simplebus0
sdmmc0 at sximmc0: 4-bit, sd high-speed, mmc high-speed, dma
ehci0 at simplebus0
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 configuration 1 interface 0 "Generic EHCI root hub" rev 2.00/1.00
addr 1
com0 at simplebus0: ns16550, no working fifo
com0: console
sxitwi0 at simplebus0
iic0 at sxitwi0
sxirtc0 at simplebus0
dwxe0 at simplebus0: address 02:ba:b0:1b:de:88
rgephy0 at dwxe0 phy 0: RTL8169S/8110S/8211 PHY, rev. 5
rgephy1 at dwxe0 phy 1: RTL8169S/8110S/8211 PHY, rev. 5
gpio0 at sxipio0: 32 pins
gpio1 at sxipio0: 32 pins
gpio2 at sxipio0: 32 pins
gpio3 at sxipio0: 32 pins
gpio4 at sxipio0: 32 pins
gpio5 at sxipio0: 32 pins
gpio6 at sxipio0: 32 pins
gpio7 at sxipio0: 32 pins
gpio8 at sxipio1: 32 pins
scsibus0 at sdmmc0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <SD/MMC, USD00, 0010> SCSI2 0/direct removable
sd0: 15080MB, 512 bytes/sector, 30883840 sectors
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
bootfile: sd0a:/bsd
boot device: sd0
root on sd0a (058b644e509a3f31.a) swap on sd0b dump on sd0b
