On Tue, Jun 26, 2018 at 08:22:08AM -0500, Ax0n wrote:
> Finally got around to recompiling again. Sorry for the noise between the
> two VM start attempts -- I suspended it to head to the office.
>
> OpenBSD 6.3-current (GENERIC.MP) #1: Tue Jun 26 06:58:23 CDT 2018
> a...@transient.attlocal.net:/mnt/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 8227655680 (7846MB)
> avail mem = 7902162944 (7536MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xe9d90 (47 entries)
> bios0: vendor Acer version "V1.07" date 11/07/2011
> bios0: Acer Aspire 5733Z
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP ASF! HPET APIC MCFG SLIC BOOT ASPT DMAR SSDT SSDT
> SSDT
> acpi0: wakeup devices AZAL(S3) P0P1(S4) EHC1(S3) USB1(S3) USB2(S3) USB3(S3)
> USB4(S3) USB5(S3) USB6(S3) USB7(S3) RP01(S4) PEG5(S4)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpihpet0 at acpi0: 14318179 Hz
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, 2527.97 MHz
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AES,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT,MELTDOWN
> cpu0: 256KB 64b/line 8-way L2 cache
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
> cpu0: apic clock running at 133MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, 2527.43 MHz
> cpu1:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AES,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT,MELTDOWN
> cpu1: 256KB 64b/line 8-way L2 cache
> cpu1: smt 1, core 0, package 0
> cpu2 at mainbus0: apid 4 (application processor)
> cpu2: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, 2527.43 MHz
> cpu2:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AES,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT,MELTDOWN
> cpu2: 256KB 64b/line 8-way L2 cache
> cpu2: smt 0, core 2, package 0
> cpu3 at mainbus0: apid 5 (application processor)
> cpu3: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, 2527.43 MHz
> cpu3:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AES,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT,MELTDOWN
> cpu3: 256KB 64b/line 8-way L2 cache
> cpu3: smt 1, core 2, package 0
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> , remapped to apid 2
> acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (P0P2)
> acpiprt2 at acpi0: bus 3 (P0P1)
> acpiprt3 at acpi0: bus 1 (RP01)
> acpiprt4 at acpi0: bus 2 (RP02)
> acpiprt5 at acpi0: bus -1 (RP03)
> acpiprt6 at acpi0: bus -1 (RP04)
> acpiprt7 at acpi0: bus -1 (RP05)
> acpiprt8 at acpi0: bus -1 (RP06)
> acpiprt9 at acpi0: bus -1 (RP07)
> acpiprt10 at acpi0: bus -1 (RP08)
> acpiprt11 at acpi0: bus -1 (PEG5)
> acpiec0 at acpi0
> acpicpu0 at acpi0: C3(350@245 mwait.3@0x20), C1(1000@3 mwait.1), PSS
> acpicpu1 at acpi0: C3(350@245 mwait.3@0x20), C1(1000@3 mwait.1), PSS
> acpicpu2 at acpi0: C3(350@245 mwait.3@0x20), C1(1000@3 mwait.1), PSS
> acpicpu3 at acpi0: C3(350@245 mwait.3@0x20), C1(1000@3 mwait.1), PSS
> "pnp0c14" at acpi0 not configured
> acpibat0 at acpi0: BAT0 model "Li_Ion_4000mA " serial 78da type Lion oem
> "SANYO "
> acpiac0 at acpi0: AC unit online
> acpibtn0 at acpi0: PWRB
> acpibtn1 at acpi0: LID0
> acpibtn2 at acpi0: SLPB
> acpicmos0 at acpi0
> "ETD0500" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> acpivideo0 at acpi0: GFX0
> acpivout0 at acpivideo0: DD03
> acpivideo1 at acpi0: VGA_
> cpu0: Enhanced SpeedStep 2527 MHz: speeds: 2533, 2399, 2266, 2133, 1999,
> 1866, 1733, 1599, 1466, 1333, 1199 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel Core Host" rev 0x02
> inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x02
> drm0 at inteldrm0
> intagp0 at inteldrm0
> agp0 at intagp0: aperture at 0xc0000000, size 0x10000000
> inteldrm0: msi
> inteldrm0: 1366x768, 32bpp
> wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> "Intel 3400 MEI" rev 0x06 at pci0 dev 22 function 0 not configured
> ehci0 at pci0 dev 26 function 0 "Intel 3400 USB" rev 0x05: apic 2 int 16
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev
> 2.00/1.00 addr 1
> azalia0 at pci0 dev 27 function 0 "Intel 3400 HD Audio" rev 0x05: msi
> azalia0: codecs: Realtek ALC272
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 3400 PCIE" rev 0x05: msi
> pci1 at ppb0 bus 1
> bge0 at pci1 dev 0 function 0 "Broadcom BCM57780" rev 0x01, BCM57780 A1
> (0x57780001): msi, address dc:0e:a1:91:7a:b9
> brgphy0 at bge0 phy 1: BCM57780 10/100/1000baseT PHY, rev. 1
> ppb1 at pci0 dev 28 function 1 "Intel 3400 PCIE" rev 0x05: msi
> pci2 at ppb1 bus 2
> athn0 at pci2 dev 0 function 0 "Atheros AR9285" rev 0x01: apic 2 int 17
> athn0: AR9285 rev 2 (1T1R), ROM rev 13, address 00:25:d3:f4:f8:4b
> ehci1 at pci0 dev 29 function 0 "Intel 3400 USB" rev 0x05: apic 2 int 23
> usb1 at ehci1: USB revision 2.0
> uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
> 2.00/1.00 addr 1
> ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xa5
> pci3 at ppb2 bus 3
> pcib0 at pci0 dev 31 function 0 "Intel HM55 LPC" rev 0x05
> ahci0 at pci0 dev 31 function 2 "Intel 3400 AHCI" rev 0x05: msi, AHCI 1.3
> ahci0: port 0: 3.0Gb/s
> ahci0: port 1: 1.5Gb/s
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 0 lun 0: <ATA, SanDisk SDSSDA12, Z320> SCSI3 0/direct
> fixed naa.5001b444a668bf8d
> sd0: 114473MB, 512 bytes/sector, 234441648 sectors, thin
> cd0 at scsibus1 targ 1 lun 0: <HL-DT-ST, CDRW/DVD GCCT20N, A108> ATAPI
> 5/cdrom removable
> ichiic0 at pci0 dev 31 function 3 "Intel 3400 SMBus" rev 0x05: apic 2 int 19
> iic0 at ichiic0
> spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
> spdmem1 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
> itherm0 at pci0 dev 31 function 6 "Intel 3400 Thermal" rev 0x05
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> wsmouse0 at pms0 mux 0
> pms0: Elantech Touchpad, version 2, firmware 0x40213
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> pci4 at mainbus0 bus 255
> pchb1 at pci4 dev 0 function 0 "Intel QuickPath" rev 0x02
> pchb2 at pci4 dev 0 function 1 "Intel QuickPath" rev 0x02
> pchb3 at pci4 dev 2 function 0 "Intel QPI Link" rev 0x02
> pchb4 at pci4 dev 2 function 1 "Intel QPI Physical" rev 0x02
> pchb5 at pci4 dev 2 function 2 "Intel Reserved" rev 0x02
> pchb6 at pci4 dev 2 function 3 "Intel Reserved" rev 0x02
> vmm0 at mainbus0: VMX/EPT
> uhub2 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
> rev 2.00/0.00 addr 2
> uvideo0 at uhub2 port 1 configuration 1 interface 0 "SuYin 1.3M HD WebCam"
> rev 2.00/1.02 addr 3
> video0 at uvideo0
> umass0 at uhub2 port 2 configuration 1 interface 0 "Generic USB2.0-CRW" rev
> 2.00/38.82 addr 4
> umass0: using SCSI over Bulk-Only
> scsibus2 at umass0: 2 targets, initiator 0
> sd1 at scsibus2 targ 1 lun 0: <Generic-, Multi-Card, 1.00> SCSI0 0/direct
> removable serial.0bda0138516388200000
> uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
> rev 2.00/0.00 addr 2
> vscsi0 at root
> scsibus3 at vscsi0: 256 targets
> softraid0 at root
> scsibus4 at softraid0: 256 targets
> root on sd0a (7c4cada893c18112.a) swap on sd0b dump on sd0b
> lock order reversal:
> 1st 0xffffff01fa00eb58 vmmaplk (&map->lock) @
> /mnt/src/sys/uvm/uvm_fault.c:1441
> 2nd 0xffff80000015c138 drmdevlk (&dev->struct_mutex) @
> /mnt/src/sys/dev/pci/drm/i915/i915_gem.c:1801
> lock order "&dev->struct_mutex"(rwlock) -> "&map->lock"(rwlock) first seen
> at:
> #0 witness_checkorder+0x4c0
> #1 _rw_enter+0x68
> #2 vm_map_lock_ln+0xbc
> #3 uvm_map+0x1a1
> #4 km_alloc+0x16a
> #5 bus_space_map+0x159
> #6 i965_alloc_ifp+0xc1
> #7 intel_gtt_chipset_setup+0x1b1
> #8 intel_enable_gtt+0x26
> #9 i915_gem_init_hw+0x43
> #10 i915_gem_init+0x24e
> #11 i915_driver_load+0xfc1
> #12 inteldrm_attach+0x37f
> #13 config_attach+0x20e
> #14 pci_probe_device+0x501
> #15 pci_enumerate_bus+0xb7
> #16 config_attach+0x20e
> #17 mainbus_attach+0x24a
> #18 config_attach+0x20e
> lock order "&map->lock"(rwlock) -> "&dev->struct_mutex"(rwlock) first seen
> at:
> #0 witness_checkorder+0x4c0
> #1 _rw_enter_write+0x53
> #2 i915_gem_object_wait_rendering__nonblocking+0x1fa
> #3 i915_gem_fault+0x144
> #4 drm_fault+0x18a
> #5 uvm_fault+0x743
> #6 pageflttrap+0x14c
> #7 trap+0x2b6
> #8 recall_trap+0x8
> vm_impl_init_vmx: created vm_map @ 0xffff800000d18000
> vm_resetcpu: resetting vm 1 vcpu 0 to power on defaults
> Guest EPTP = 0x1f95bd01e
> vmm_alloc_vpid: allocated VPID/ASID 1
> vmm_fpurestore: guest attempted to set invalid bits in xcr0
> vmm_free_vpid: freed VPID/ASID 1
> lock order reversal:
> 1st 0xffff800000021668 acpilk (&sc->sc_lck) @
> /mnt/src/sys/dev/acpi/acpi.c:2508
> 2nd 0xffff80000015c278 mcrwl (&dev->mode_config.mutex) @
> /mnt/src/sys/dev/pci/drm/drm_modeset_lock.c:76
> lock order "&dev->mode_config.mutex"(rwlock) -> "&sc->sc_lck"(rwlock) first
> seen at:
> #0 witness_checkorder+0x4c0
> #1 _rw_enter_write+0x53
> #2 acpivout_get_param+0xc8
> #3 inteldrm_backlight_get_brightness+0x39
> #4 get_properties+0x166
> #5 drm_mode_getconnector+0x33b
> #6 drm_do_ioctl+0x221
> #7 drmioctl+0xf9
> #8 VOP_IOCTL+0x5a
> #9 vn_ioctl+0x6b
> #10 sys_ioctl+0x477
> #11 syscall+0x32a
> #12 Xsyscall_untramp+0xe4
> video0 detached
> uvideo0 detached
> sd1 detached
> scsibus2 detached
> umass0 detached
> uhub2 detached
> uhub0 detached
> uhub3 detached
> uhub1 detached
> uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev
> 2.00/1.00 addr 1
> uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
> 2.00/1.00 addr 1
> uhub2 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
> rev 2.00/0.00 addr 2
> uvideo0 at uhub2 port 1 configuration 1 interface 0 "SuYin 1.3M HD WebCam"
> rev 2.00/1.02 addr 3
> video0 at uvideo0
> umass0 at uhub2 port 2 configuration 1 interface 0 "Generic USB2.0-CRW" rev
> 2.00/38.82 addr 4
> umass0: using SCSI over Bulk-Only
> scsibus2 at umass0: 2 targets, initiator 0
> sd1 at scsibus2 targ 1 lun 0: <Generic-, Multi-Card, 1.00> SCSI0 0/direct
> removable serial.0bda0138516388200000
> uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
> rev 2.00/0.00 addr 2
> vm_impl_init_vmx: created vm_map @ 0xffff800000d3aa00
> vm_resetcpu: resetting vm 2 vcpu 0 to power on defaults
> Guest EPTP = 0x1f95bb01e
> vmm_alloc_vpid: allocated VPID/ASID 1
> vmm_fpurestore: guest attempted to set invalid bits in xcr0
That's the problem.
What's the guest VM you're trying to boot here? If it's OpenBSD, can
you give the build date and version?
Thanks.
-ml
> vmm_free_vpid: freed VPID/ASID 1
>
>
>
>
>
> On Sun, Jun 24, 2018 at 2:33 PM, Mike Larkin <mlar...@azathoth.net> wrote:
>
> > On Sun, Jun 24, 2018 at 01:41:47AM -0500, Ax0n wrote:
> > > On Sat, Jun 23, 2018 at 3:54 PM, Ax0n <a...@h-i-r.net> wrote:
> > >
> > > >
> > > > FWIW, that patch didn't apply cleanly to a fresh pull of the tree from
> > > > GitHub. I know it's not OFFICIALLY -CURRENT for realsies but it's what
> > I
> > > > have been using on this laptop for months. It sounds like it was
> > probably
> > > > patched against -STABLE? I didn't read the entire thread on bugs@. I
> > have
> > > > tried with 3 daily snapshots in a row and I'm having the same problem.
> > I
> > > > haven't actually fired up vmm in a few weeks, so I'm not sure exactly
> > when
> > > > it quit working. I'm re-building with VMM_DEBUG first.
> > > >
> > > > Mike, I'll send all relevant info (dmesg, vmd -dvvv, vm.conf) to bugs@
> > > > once I have it, unless this sounds like an ongoing thing you probably
> > have
> > > > on your radar already. I'm not in a huge rush, so I can wait a bit if
> > you
> > > > think you have something that'll make it into -CURRENT in a while.
> > > >
> > >
> > > Following up and cc bugs@ I built the system with VMM_DEBUG enabled.
> > >
> >
> > This does not look like the output from a kernel with VMM_DEBUG enabled.
> > You'll
> > be seeing all sorts of debug output to dmesg as the VM starts, runs, and
> > ultimately in your case aborts.
> >
> > -ml
> >
> > > >Synopsis: vmm(4) VMs fail to start: ioctl failed: Invalid argument
> > > >Category: amd64
> > > >Environment:
> > > System : OpenBSD 6.3
> > > Details : OpenBSD 6.3-current (GENERIC.MP) #49: Sat Jun 23
> > > 09:32:05 MDT 2018
> > > dera...@amd64.openbsd.org:
> > > /usr/src/sys/arch/amd64/compile/GENERIC.MP
> > >
> > > Architecture: OpenBSD.amd64
> > > Machine : amd64
> > > >Description:
> > > VMs fail to boot.
> > > [axon@transient ~]$ doas vmd -dvvv
> > > startup
> > > /etc/vm.conf:4: switch "local" registered
> > > /etc/vm.conf:8: switch "internal" registered
> > > /etc/vm.conf:12: switch "wired" registered
> > > vm_register: registering vm 1
> > > /etc/vm.conf:28: vm "OBSD-Stable.vm" registered (disabled)
> > > vm_register: registering vm 2
> > > /etc/vm.conf:41: vm "OBSD-Stable-alt.vm" registered (disabled)
> > > vm_register: registering vm 3
> > > /etc/vm.conf:53: vm "OBSDSnap64.vm" registered (disabled)
> > > config_setconfig: setting config
> > > vm_priv_brconfig: interface bridge0 description switch1-local
> > > vm_priv_brconfig: interface bridge1 description switch2-internal
> > > vm_priv_brconfig: interface bridge0 description switch3-wired
> > > vmd_configure: not creating vm OBSD-Stable.vm (disabled)
> > > vmd_configure: not creating vm OBSD-Stable-alt.vm (disabled)
> > > vmd_configure: not creating vm OBSDSnap64.vm (disabled)
> > > config_getconfig: priv retrieving config
> > > config_getconfig: control retrieving config
> > > config_getconfig: vmm retrieving config
> > > vm_opentty: vm OBSDSnap64.vm tty /dev/ttyp3 uid 1000 gid 4 mode 620
> > > vm_register: registering vm 3
> > > vm_priv_ifconfig: interface tap0 description vm3-if0-OBSDSnap64.vm
> > > vm_priv_ifconfig: switch "local" interface bridge0 add tap0
> > > OBSDSnap64.vm: started vm 3 successfully, tty /dev/ttyp3
> > > loadfile_bios: loaded BIOS image
> > > run_vm: initializing hardware for vm OBSDSnap64.vm
> > > pic_set_elcr: setting level triggered mode for irq 3
> > > pic_set_elcr: setting level triggered mode for irq 5
> > > pic_set_elcr: setting level triggered mode for irq 6
> > > virtio_init: vm "OBSDSnap64.vm" vio0 lladdr fe:e1:ba:d0:eb:ac
> > > pic_set_elcr: setting level triggered mode for irq 7
> > > run_vm: starting vcpu threads for vm OBSDSnap64.vm
> > > vcpu_reset: resetting vcpu 0 for vm 2
> > > run_vm: waiting on events for VM OBSDSnap64.vm
> > > vcpu_run_loop: vm 2 / vcpu 0 run ioctl failed: Invalid argument
> > > vmm_sighdlr: handling signal 20
> > > vmm_sighdlr: attempting to terminate vm 3
> > > terminate_vm: terminating vmid 2
> > > vmm_sighdlr: calling vm_remove
> > > vm_remove: removing vm id 3 from running config
> > > vm_remove: calling vm_stop
> > > vm_stop: stopping vm 3
> > > vmd_dispatch_vmm: handling TERMINATE_EVENT for vm id 3 ret 22
> > > vmd_dispatch_vmm: about to stop vm id 3
> > > vm_stop: stopping vm 3
> > > vm_opentty: vm OBSDSnap64.vm tty /dev/ttyp4 uid 1000 gid 4 mode 620
> > > vm_register: registering vm 3
> > > vm_priv_ifconfig: interface tap0 description vm3-if0-OBSDSnap64.vm
> > > vm_priv_ifconfig: switch "local" interface bridge0 add tap0
> > > OBSDSnap64.vm: started vm 3 successfully, tty /dev/ttyp4
> > > loadfile_bios: loaded BIOS image
> > > run_vm: initializing hardware for vm OBSDSnap64.vm
> > > pic_set_elcr: setting level triggered mode for irq 3
> > > pic_set_elcr: setting level triggered mode for irq 5
> > > pic_set_elcr: setting level triggered mode for irq 6
> > > virtio_init: vm "OBSDSnap64.vm" vio0 lladdr fe:e1:ba:d0:eb:ac
> > > pic_set_elcr: setting level triggered mode for irq 7
> > > run_vm: starting vcpu threads for vm OBSDSnap64.vm
> > > vcpu_reset: resetting vcpu 0 for vm 3
> > > run_vm: waiting on events for VM OBSDSnap64.vm
> > > vcpu_run_loop: vm 3 / vcpu 0 run ioctl failed: Invalid argument
> > > vmm_sighdlr: handling signal 20
> > > vmm_sighdlr: attempting to terminate vm 3
> > > terminate_vm: terminating vmid 3
> > > vmm_sighdlr: calling vm_remove
> > > vm_remove: removing vm id 3 from running config
> > > vm_remove: calling vm_stop
> > > vm_stop: stopping vm 3
> > > vmd_dispatch_vmm: handling TERMINATE_EVENT for vm id 3 ret 22
> > > vmd_dispatch_vmm: about to stop vm id 3
> > > vm_stop: stopping vm 3
> > >
> > > ############################
> > > Contents of vm.conf:
> > > ############################
> > > switch "local" {
> > > interface bridge0
> > > }
> > >
> > > switch "internal" {
> > > interface bridge1
> > > }
> > >
> > > switch "wired" {
> > > interface bridge0
> > > }
> > >
> > > # OpenBSD Stable
> > > vm "OBSD-Stable.vm" {
> > > disable
> > > owner axon
> > > memory 512M
> > > disk "/home/axon/vmm/obsd-stable.img"
> > > interface {
> > > switch "local"
> > > lladdr fe:e1:ba:d0:eb:ab
> > > }
> > > # interface {
> > > # switch "local"
> > > # lladdr fe:e1:ba:d0:eb:0b
> > > # }
> > > }
> > >
> > >
> > > # OpenBSD Stable alternate
> > > vm "OBSD-Stable-alt.vm" {
> > > disable
> > > owner axon
> > > memory 256M
> > > disk "/home/axon/vmm/obsd-stable-alt.img"
> > > interface {
> > > switch "local"
> > > lladdr fe:e1:ba:d0:eb:ad
> > > }
> > > }
> > >
> > > # OpenBSD amd64 Snapshot
> > > vm "OBSDSnap64.vm" {
> > > disable
> > > owner axon
> > > memory 256M
> > > disk "/home/axon/vmm/obsd-snap64.img"
> > > interface {
> > > switch "local"
> > > lladdr fe:e1:ba:d0:eb:ac
> > > }
> > > }
> > >
> > >
> > > >How-To-Repeat:
> > > On this system (Acer Aspire 5733Z with upgrades), any attempt to
> > > start a vm as a user or root will fail.
> > >
> > > >Fix:
> > > N/A
> > >
> > > dmesg:
> > > OpenBSD 6.3-current (GENERIC.MP) #49: Sat Jun 23 09:32:05 MDT 2018
> > > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> > > real mem = 8227655680 (7846MB)
> > > avail mem = 7902208000 (7536MB)
> > > mpath0 at root
> > > scsibus0 at mpath0: 256 targets
> > > mainbus0 at root
> > > bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xe9d90 (47 entries)
> > > bios0: vendor Acer version "V1.07" date 11/07/2011
> > > bios0: Acer Aspire 5733Z
> > > acpi0 at bios0: rev 2
> > > acpi0: sleep states S0 S3 S4 S5
> > > acpi0: tables DSDT FACP ASF! HPET APIC MCFG SLIC BOOT ASPT DMAR SSDT SSDT
> > > SSDT
> > > acpi0: wakeup devices AZAL(S3) P0P1(S4) EHC1(S3) USB1(S3) USB2(S3)
> > USB3(S3)
> > > USB4(S3) USB5(S3) USB6(S3) USB7(S3) RP01(S4) PEG5(S4)
> > > acpitimer0 at acpi0: 3579545 Hz, 24 bits
> > > acpihpet0 at acpi0: 14318179 Hz
> > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> > > cpu0 at mainbus0: apid 0 (boot processor)
> > > cpu0: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, 2527.85 MHz
> > > cpu0:
> > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
> > CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,
> > PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,
> > CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AES,NXE,RDTSCP,
> > LONG,LAHF,PERF,ITSC,SENSOR,ARAT,MELTDOWN
> > > cpu0: 256KB 64b/line 8-way L2 cache
> > > cpu0: smt 0, core 0, package 0
> > > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
> > > cpu0: apic clock running at 133MHz
> > > cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
> > > cpu1 at mainbus0: apid 1 (application processor)
> > > cpu1: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, 2527.44 MHz
> > > cpu1:
> > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
> > CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,
> > PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,
> > CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AES,NXE,RDTSCP,
> > LONG,LAHF,PERF,ITSC,SENSOR,ARAT,MELTDOWN
> > > cpu1: 256KB 64b/line 8-way L2 cache
> > > cpu1: smt 1, core 0, package 0
> > > cpu2 at mainbus0: apid 4 (application processor)
> > > cpu2: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, 2527.44 MHz
> > > cpu2:
> > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
> > CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,
> > PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,
> > CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AES,NXE,RDTSCP,
> > LONG,LAHF,PERF,ITSC,SENSOR,ARAT,MELTDOWN
> > > cpu2: 256KB 64b/line 8-way L2 cache
> > > cpu2: smt 0, core 2, package 0
> > > cpu3 at mainbus0: apid 5 (application processor)
> > > cpu3: Intel(R) Core(TM) i5 CPU M 540 @ 2.53GHz, 2527.44 MHz
> > > cpu3:
> > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
> > CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,
> > PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,
> > CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AES,NXE,RDTSCP,
> > LONG,LAHF,PERF,ITSC,SENSOR,ARAT,MELTDOWN
> > > cpu3: 256KB 64b/line 8-way L2 cache
> > > cpu3: smt 1, core 2, package 0
> > > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> > > , remapped to apid 2
> > > acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
> > > acpiprt0 at acpi0: bus 0 (PCI0)
> > > acpiprt1 at acpi0: bus -1 (P0P2)
> > > acpiprt2 at acpi0: bus 3 (P0P1)
> > > acpiprt3 at acpi0: bus 1 (RP01)
> > > acpiprt4 at acpi0: bus 2 (RP02)
> > > acpiprt5 at acpi0: bus -1 (RP03)
> > > acpiprt6 at acpi0: bus -1 (RP04)
> > > acpiprt7 at acpi0: bus -1 (RP05)
> > > acpiprt8 at acpi0: bus -1 (RP06)
> > > acpiprt9 at acpi0: bus -1 (RP07)
> > > acpiprt10 at acpi0: bus -1 (RP08)
> > > acpiprt11 at acpi0: bus -1 (PEG5)
> > > acpiec0 at acpi0
> > > acpicpu0 at acpi0: C3(350@245 mwait.3@0x20), C1(1000@3 mwait.1), PSS
> > > acpicpu1 at acpi0: C3(350@245 mwait.3@0x20), C1(1000@3 mwait.1), PSS
> > > acpicpu2 at acpi0: C3(350@245 mwait.3@0x20), C1(1000@3 mwait.1), PSS
> > > acpicpu3 at acpi0: C3(350@245 mwait.3@0x20), C1(1000@3 mwait.1), PSS
> > > "pnp0c14" at acpi0 not configured
> > > acpibat0 at acpi0: BAT0 model "Li_Ion_4000mA " serial 78da type Lion oem
> > > "SANYO "
> > > acpiac0 at acpi0: AC unit online
> > > acpibtn0 at acpi0: PWRB
> > > acpibtn1 at acpi0: LID0
> > > acpibtn2 at acpi0: SLPB
> > > acpicmos0 at acpi0
> > > "ETD0500" at acpi0 not configured
> > > "PNP0C14" at acpi0 not configured
> > > "PNP0C14" at acpi0 not configured
> > > acpivideo0 at acpi0: GFX0
> > > acpivout0 at acpivideo0: DD03
> > > acpivideo1 at acpi0: VGA_
> > > cpu0: Enhanced SpeedStep 2527 MHz: speeds: 2533, 2399, 2266, 2133, 1999,
> > > 1866, 1733, 1599, 1466, 1333, 1199 MHz
> > > pci0 at mainbus0 bus 0
> > > pchb0 at pci0 dev 0 function 0 "Intel Core Host" rev 0x02
> > > inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x02
> > > drm0 at inteldrm0
> > > intagp0 at inteldrm0
> > > agp0 at intagp0: aperture at 0xc0000000, size 0x10000000
> > > inteldrm0: msi
> > > inteldrm0: 1366x768, 32bpp
> > > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
> > > wsdisplay0: screen 1-5 added (std, vt100 emulation)
> > > "Intel 3400 MEI" rev 0x06 at pci0 dev 22 function 0 not configured
> > > ehci0 at pci0 dev 26 function 0 "Intel 3400 USB" rev 0x05: apic 2 int 16
> > > usb0 at ehci0: USB revision 2.0
> > > uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev
> > > 2.00/1.00 addr 1
> > > azalia0 at pci0 dev 27 function 0 "Intel 3400 HD Audio" rev 0x05: msi
> > > azalia0: codecs: Realtek ALC272
> > > audio0 at azalia0
> > > ppb0 at pci0 dev 28 function 0 "Intel 3400 PCIE" rev 0x05: msi
> > > pci1 at ppb0 bus 1
> > > bge0 at pci1 dev 0 function 0 "Broadcom BCM57780" rev 0x01, BCM57780 A1
> > > (0x57780001): msi, address dc:0e:a1:91:7a:b9
> > > brgphy0 at bge0 phy 1: BCM57780 10/100/1000baseT PHY, rev. 1
> > > ppb1 at pci0 dev 28 function 1 "Intel 3400 PCIE" rev 0x05: msi
> > > pci2 at ppb1 bus 2
> > > athn0 at pci2 dev 0 function 0 "Atheros AR9285" rev 0x01: apic 2 int 17
> > > athn0: AR9285 rev 2 (1T1R), ROM rev 13, address 00:25:d3:f4:f8:4b
> > > ehci1 at pci0 dev 29 function 0 "Intel 3400 USB" rev 0x05: apic 2 int 23
> > > usb1 at ehci1: USB revision 2.0
> > > uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
> > > 2.00/1.00 addr 1
> > > ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xa5
> > > pci3 at ppb2 bus 3
> > > pcib0 at pci0 dev 31 function 0 "Intel HM55 LPC" rev 0x05
> > > ahci0 at pci0 dev 31 function 2 "Intel 3400 AHCI" rev 0x05: msi, AHCI 1.3
> > > ahci0: port 0: 3.0Gb/s
> > > ahci0: port 1: 1.5Gb/s
> > > scsibus1 at ahci0: 32 targets
> > > sd0 at scsibus1 targ 0 lun 0: <ATA, SanDisk SDSSDA12, Z320> SCSI3
> > 0/direct
> > > fixed naa.5001b444a668bf8d
> > > sd0: 114473MB, 512 bytes/sector, 234441648 sectors, thin
> > > cd0 at scsibus1 targ 1 lun 0: <HL-DT-ST, CDRW/DVD GCCT20N, A108> ATAPI
> > > 5/cdrom removable
> > > ichiic0 at pci0 dev 31 function 3 "Intel 3400 SMBus" rev 0x05: apic 2
> > int 19
> > > iic0 at ichiic0
> > > spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
> > > spdmem1 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
> > > itherm0 at pci0 dev 31 function 6 "Intel 3400 Thermal" rev 0x05
> > > isa0 at pcib0
> > > isadma0 at isa0
> > > pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> > > pckbd0 at pckbc0 (kbd slot)
> > > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > > pms0 at pckbc0 (aux slot)
> > > wsmouse0 at pms0 mux 0
> > > pms0: Elantech Touchpad, version 2, firmware 0x40213
> > > pcppi0 at isa0 port 0x61
> > > spkr0 at pcppi0
> > > pci4 at mainbus0 bus 255
> > > pchb1 at pci4 dev 0 function 0 "Intel QuickPath" rev 0x02
> > > pchb2 at pci4 dev 0 function 1 "Intel QuickPath" rev 0x02
> > > pchb3 at pci4 dev 2 function 0 "Intel QPI Link" rev 0x02
> > > pchb4 at pci4 dev 2 function 1 "Intel QPI Physical" rev 0x02
> > > pchb5 at pci4 dev 2 function 2 "Intel Reserved" rev 0x02
> > > pchb6 at pci4 dev 2 function 3 "Intel Reserved" rev 0x02
> > > vmm0 at mainbus0: VMX/EPT
> > > uhub2 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching
> > Hub"
> > > rev 2.00/0.00 addr 2
> > > uvideo0 at uhub2 port 1 configuration 1 interface 0 "SuYin 1.3M HD
> > WebCam"
> > > rev 2.00/1.02 addr 3
> > > video0 at uvideo0
> > > umass0 at uhub2 port 2 configuration 1 interface 0 "Generic USB2.0-CRW"
> > rev
> > > 2.00/38.82 addr 4
> > > umass0: using SCSI over Bulk-Only
> > > scsibus2 at umass0: 2 targets, initiator 0
> > > sd1 at scsibus2 targ 1 lun 0: <Generic-, Multi-Card, 1.00> SCSI0 0/direct
> > > removable serial.0bda0138516388200000
> > > uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching
> > Hub"
> > > rev 2.00/0.00 addr 2
> > > vscsi0 at root
> > > scsibus3 at vscsi0: 256 targets
> > > softraid0 at root
> > > scsibus4 at softraid0: 256 targets
> > > root on sd0a (7c4cada893c18112.a) swap on sd0b dump on sd0b
> > > lock order reversal:
> > > 1st 0xffffff01f7778888 vmmaplk (&map->lock) @
> > > /usr/src/sys/uvm/uvm_fault.c:1441
> > > 2nd 0xffff80000015c138 drmdevlk (&dev->struct_mutex) @
> > > /usr/src/sys/dev/pci/drm/i915/i915_gem.c:1801
> > > lock order "&dev->struct_mutex"(rwlock) -> "&map->lock"(rwlock) first
> > seen
> > > at:
> > > #0 witness_checkorder+0x4c0
> > > #1 _rw_enter+0x68
> > > #2 vm_map_lock_ln+0xbc
> > > #3 uvm_map+0x1a1
> > > #4 km_alloc+0x16a
> > > #5 bus_space_map+0x159
> > > #6 i965_alloc_ifp+0xc1
> > > #7 intel_gtt_chipset_setup+0x1b1
> > > #8 intel_enable_gtt+0x26
> > > #9 i915_gem_init_hw+0x43
> > > #10 i915_gem_init+0x24e
> > > #11 i915_driver_load+0xfc1
> > > #12 inteldrm_attach+0x37f
> > > #13 config_attach+0x20e
> > > #14 pci_probe_device+0x501
> > > #15 pci_enumerate_bus+0xb7
> > > #16 config_attach+0x20e
> > > #17 mainbus_attach+0x24a
> > > #18 config_attach+0x20e
> > > lock order "&map->lock"(rwlock) -> "&dev->struct_mutex"(rwlock) first
> > seen
> > > at:
> > > #0 witness_checkorder+0x4c0
> > > #1 _rw_enter_write+0x53
> > > #2 i915_gem_object_wait_rendering__nonblocking+0x1fa
> > > #3 i915_gem_fault+0x144
> > > #4 drm_fault+0x18a
> > > #5 uvm_fault+0x743
> > > #6 pageflttrap+0x14c
> > > #7 trap+0x2b2
> > > #8 recall_trap+0x8
> > >
> > > usbdevs:
> > > Controller /dev/usb0:
> > > addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
> > > Intel(0x8086), rev 1.00
> > > port 1 addr 2: high speed, self powered, config 1, Rate Matching
> > > Hub(0x0020), Intel(0x8087), rev 0.00
> > > port 1 addr 3: high speed, power 500 mA, config 1, 1.3M HD
> > > WebCam(0xd250), SuYin(0x064e), rev 1.02, iSerialNumber
> > > HF1316-A821-HN01-VA-R01.00.02
> > > port 2 addr 4: high speed, power 500 mA, config 1, USB2.0-CRW(0x0138),
> > > Generic(0x0bda), rev 38.82, iSerialNumber 20090516388200000
> > > port 3 powered
> > > port 4 powered
> > > port 5 powered
> > > port 6 powered
> > > port 2 powered
> > > Controller /dev/usb1:
> > > addr 1: high speed, self powered, config 1, EHCI root hub(0x0000),
> > > Intel(0x8086), rev 1.00
> > > port 1 addr 2: high speed, self powered, config 1, Rate Matching
> > > Hub(0x0020), Intel(0x8087), rev 0.00
> > > port 1 powered
> > > port 2 powered
> > > port 3 powered
> > > port 4 powered
> > > port 5 powered
> > > port 6 powered
> > > port 7 powered
> > > port 8 powered
> > > port 2 powered
> >
