>Synopsis: Unable to use certbot
>Category: very annoying
>Environment:
System : OpenBSD 6.3
Details : OpenBSD 6.3 (GENERIC.MP) #486: Sat Mar 24 22:37:16 MDT
2018
dera...@sparc64.openbsd.org:/usr/src/sys/arch/sparc64/compile/GENERIC.MP
Architecture: OpenBSD.sparc64
Machine : sparc64
>Description:
tried to run "certbot certonly [selection of options]" it always fails
in the same way
From the log, it looks like bits are missing from the python install,
but I don't know
python, and I could be wrong.
>How-To-Repeat:
at the shell prompt type
> certbot certonly --manual .....
>Fix:
Don't know (I do have a log created with script, but don't know how to
attach it)
dmesg:
OpenBSD 6.3 (GENERIC.MP) #486: Sat Mar 24 22:37:16 MDT 2018
dera...@sparc64.openbsd.org:/usr/src/sys/arch/sparc64/compile/GENERIC.MP
real mem = 1572864000 (1500MB)
avail mem = 1524817920 (1454MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root: Sun Fire T200
cpu0 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz
cpu1 at mainbus0: SUNW,UltraSPARC-T1 (rev 0.0) @ 1000 MHz
vbus0 at mainbus0
"flashprom" at vbus0 not configured
cbus0 at vbus0
vdsk0 at cbus0 chan 0x2: ivec 0x4, 0x5
scsibus1 at vdsk0: 2 targets
sd0 at scsibus1 targ 0 lun 0: <SUN, Virtual Disk, 1.1> SCSI3 0/direct fixed
sd0: 6144MB, 512 bytes/sector, 12582912 sectors
vdsk1 at cbus0 chan 0x3: ivec 0x6, 0x7
scsibus2 at vdsk1: 2 targets
sd1 at scsibus2 targ 0 lun 0: <SUN, Virtual Disk, 1.1> SCSI3 0/direct fixed
sd1: 2MB, 512 bytes/sector, 5760 sectors
vnet0 at cbus0 chan 0x4: ivec 0x8, 0x9, address 00:14:4f:fa:57:21
vcons0 at vbus0: ivec 0x111, console
vrtc0 at vbus0
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
bootpath: /virtual-devices@100,0/channel-devices@200,0/disk@0,0
root on sd0a (31c2d1155bc86970.a) swap on sd0b dump on sd0b
WARNING: / was not properly unmounted
usbdevs:
usbdevs: no USB controllers found
pcidump:
acpidump:
