Last update. AR9271 firmware loaded successfully when connected it to any of two USB3.0 ports on AMD GX-420CA SOC with Radeon(tm) HD Graphics. But do not load on USB2.0 ones on the same platform.
On 4/15/2018 11:48 AM, Denis wrote: > For test I've just updated OpenBSD from 6.2amd64 to 6.3amd64 on Intel > based machine (shortened dmesg is listed below) and there is no 'athn0: > could not load firmware' error appears after upgrade. On Intel's > platform AR9271 works as expected. > > On AMD based machine 'athn0: could not load firmware' error is > permanent. AR9271 does not work completely on AMD GX-420CA SOC. Full > dmesg of AMD machine fully listed in my previous message. > > OpenBSD 6.3 (GENERIC.MP) #107: Sat Mar 24 14:21:59 MDT 2018 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 8451125248 (8059MB) > avail mem = 8192278528 (7812MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xdae9c000 (64 entries) > bios0: vendor LENOVO version "8DET72WW (1.42 )" date 02/18/2016 > bios0: LENOVO 5491C51 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP SLIC SSDT SSDT SSDT HPET APIC MCFG ECDT ASF! > TCPA SSDT SSDT DMAR UEFI UEFI UEFI > acpi0: wakeup devices LID_(S3) SLPB(S3) IGBE(S4) EXP4(S4) EXP7(S4) > EHC1(S3) EHC2(S3) HDEF(S4) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpihpet0 at acpi0: 14318179 Hz > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz, 2791.33 MHz > cpu0: > ... > > On 4/5/2018 6:46 PM, Denis wrote: >> Stefan, >> >> You're right the machine with installed 6.3 is completely different than >> 6.2 currently running. >> >> Here is dmesg of 6.3 machine: >> >> OpenBSD 6.3 (GENERIC.MP) #107: Sat Mar 24 14:21:59 MDT 2018 >> dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP >> real mem = 7964327936 (7595MB) >> avail mem = 7715876864 (7358MB) >> mpath0 at root >> scsibus0 at mpath0: 256 targets >> mainbus0 at root >> bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe0840 (38 entries) >> bios0: vendor Phoenix Technologies Ltd. version "SBCFP4_3.0.0.312_11 >> X64" date 09/21/2014 >> bios0: CompuLab fit-PC4 >> acpi0 at bios0: rev 2 >> acpi0: sleep states S0 S3 S4 S5 >> acpi0: tables DSDT FACP HPET APIC MCFG FPDT UEFI POAT BATB SSDT SSDT UEFI >> acpi0: wakeup devices GPP0(S4) GPP1(S4) GPP2(S4) GPP3(S4) GFX_(S4) >> XHC0(S4) OHC1(S4) EHC1(S4) OHC2(S4) EHC2(S4) SBAZ(S4) UAR1(S3) >> acpitimer0 at acpi0: 3579545 Hz, 32 bits >> acpihpet0 at acpi0: 14318180 Hz >> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat >> cpu0 at mainbus0: apid 0 (boot processor) >> cpu0: AMD GX-420CA SOC with Radeon(tm) HD Graphics, 1996.49 MHz >> cpu0: >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXS >> \ >> R,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F >> \ >> 16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PCTRL3,ITSC,BMI1 >> >> cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB >> 64b/line 16-way L2 cache >> cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative >> cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative >> acpihpet0: recalibrated TSC frequency 1996262805 Hz >> cpu0: smt 0, core 0, package 0 >> mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges >> cpu0: apic clock running at 99MHz >> cpu0: mwait min=64, max=64, IBE >> cpu1 at mainbus0: apid 1 (application processor) >> cpu1: AMD GX-420CA SOC with Radeon(tm) HD Graphics, 1996.26 MHz >> cpu1: >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXS >> \ >> R,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F >> \ >> 16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PCTRL3,ITSC,BMI1 >> >> cpu1: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB >> 64b/line 16-way L2 cache >> cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative >> cpu1: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative >> cpu1: smt 0, core 1, package 0 >> cpu2 at mainbus0: apid 2 (application processor) >> cpu2: AMD GX-420CA SOC with Radeon(tm) HD Graphics, 1996.26 MHz >> cpu2: >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXS >> \ >> R,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F >> \ >> 16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PCTRL3,ITSC,BMI1 >> >> cpu2: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB >> 64b/line 16-way L2 cache >> cpu2: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative >> cpu2: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative >> cpu2: smt 0, core 2, package 0 >> cpu3 at mainbus0: apid 3 (application processor) >> cpu3: AMD GX-420CA SOC with Radeon(tm) HD Graphics, 1996.26 MHz >> cpu3: >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXS >> \ >> R,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F >> \ >> 16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PCTRL3,ITSC,BMI1 >> >> cpu3: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB >> 64b/line 16-way L2 cache >> cpu3: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative >> cpu3: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative >> cpu3: smt 0, core 3, package 0 >> ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 21, 24 pins >> , remapped to apid 4 >> ioapic1 at mainbus0: apid 5 pa 0xfec01000, version 21, 32 pins >> , remapped to apid 5 >> acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 >> acpiprt0 at acpi0: bus 0 (PCI0) >> acpiprt1 at acpi0: bus 2 (GPP0) >> acpiprt2 at acpi0: bus -1 (GPP1) >> acpiprt3 at acpi0: bus 4 (GPP2) >> acpiprt4 at acpi0: bus 5 (GPP3) >> acpiprt5 at acpi0: bus 1 (GFX_) >> acpicpu0 at acpi0: C2(0@400 io@0x841), C1(@1 halt!), PSS >> acpicpu1 at acpi0: C2(0@400 io@0x841), C1(@1 halt!), PSS >> acpicpu2 at acpi0: C2(0@400 io@0x841), C1(@1 halt!), PSS >> acpicpu3 at acpi0: C2(0@400 io@0x841), C1(@1 halt!), PSS >> acpibtn0 at acpi0: PWRB >> "PNP0A05" at acpi0 not configured >> acpivideo0 at acpi0: VGA_ >> cpu0: 1996 MHz: speeds: 2000 1800 1600 1200 1000 800 MHz >> pci0 at mainbus0 bus 0 >> pchb0 at pci0 dev 0 function 0 "AMD AMD64 16h Host" rev 0x00 >> vga1 at pci0 dev 1 function 0 vendor "ATI", unknown product 0x9831 rev 0x00 >> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) >> wsdisplay0: screen 1-5 added (80x25, vt100 emulation) >> azalia0 at pci0 dev 1 function 1 "ATI Radeon HD Audio" rev 0x00: msi >> azalia0: no supported codecs >> pchb1 at pci0 dev 2 function 0 vendor "AMD", unknown product 0x1538 rev 0x00 >> ppb0 at pci0 dev 2 function 1 "AMD AMD64 16h PCIE" rev 0x00: msi >> pci1 at ppb0 bus 1 >> ppb1 at pci0 dev 2 function 2 "AMD AMD64 16h PCIE" rev 0x00: msi >> pci2 at ppb1 bus 2 >> athn0 at pci2 dev 0 function 0 "Atheros AR5418" rev 0x01: apic 5 int 4 >> athn0: MAC AR5418 rev 2, RF AR5133 (2T3R), ROM rev 5, address >> xx:xx:xx:xx:xx:xx >> ppb2 at pci0 dev 2 function 4 "AMD AMD64 16h PCIE" rev 0x00: msi >> pci3 at ppb2 bus 4 >> em0 at pci3 dev 0 function 0 "Intel I211" rev 0x03: msi, address >> xx:xx:xx:xx:xx:xx >> ppb3 at pci0 dev 2 function 5 "AMD AMD64 16h PCIE" rev 0x00: msi >> pci4 at ppb3 bus 5 >> em1 at pci4 dev 0 function 0 "Intel I211" rev 0x03: msi, address >> xx:xx:xx:xx:xx:xx >> xhci0 at pci0 dev 16 function 0 "AMD Bolton xHCI" rev 0x01: msi >> usb0 at xhci0: USB revision 3.0 >> uhub0 at usb0 configuration 1 interface 0 "AMD xHCI root hub" rev >> 3.00/1.00 addr 1 >> ahci0 at pci0 dev 17 function 0 "AMD Hudson-2 SATA" rev 0x40: msi, AHCI 1.3 >> ahci0: port 0: 6.0Gb/s >> scsibus1 at ahci0: 32 targets >> sd0 at scsibus1 targ 0 lun 0: <ATA, ST500, 0001> SCSI3 0/direct fixed >> naa.5000c500ac5b7fb7 >> sd0: 476940MB, 512 bytes/sector, 976773168 sectors >> ohci0 at pci0 dev 18 function 0 "AMD Hudson-2 USB" rev 0x39: apic 4 int >> 18, version 1.0, legacy support >> ehci0 at pci0 dev 18 function 2 "AMD Hudson-2 USB2" rev 0x39: apic 4 int 17 >> usb1 at ehci0: USB revision 2.0 >> uhub1 at usb1 configuration 1 interface 0 "AMD EHCI root hub" rev >> 2.00/1.00 addr 1 >> ohci1 at pci0 dev 19 function 0 "AMD Hudson-2 USB" rev 0x39: apic 4 int >> 18, version 1.0, legacy support >> ehci1 at pci0 dev 19 function 2 "AMD Hudson-2 USB2" rev 0x39: apic 4 int 17 >> usb2 at ehci1: USB revision 2.0 >> uhub2 at usb2 configuration 1 interface 0 "AMD EHCI root hub" rev >> 2.00/1.00 addr 1 >> piixpm0 at pci0 dev 20 function 0 "AMD Hudson-2 SMBus" rev 0x3a: polling >> iic0 at piixpm0 >> spdmem0 at iic0 addr 0x51: 8GB DDR3 SDRAM PC3-12800 SO-DIMM >> azalia1 at pci0 dev 20 function 2 "AMD Hudson-2 HD Audio" rev 0x02: apic >> 4 int 16 >> azalia1: codecs: Realtek ALC888 >> audio0 at azalia1 >> pcib0 at pci0 dev 20 function 3 "AMD Hudson-2 LPC" rev 0x11 >> sdhc0 at pci0 dev 20 function 7 "AMD Bolton SD/MMC" rev 0x01: apic 4 int 16 >> sdhc0: SDHC 2.0, 50 MHz base clock >> sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma >> pchb2 at pci0 dev 24 function 0 "AMD AMD64 16h Link Cfg" rev 0x00 >> pchb3 at pci0 dev 24 function 1 "AMD AMD64 16h Address Map" rev 0x00 >> pchb4 at pci0 dev 24 function 2 "AMD AMD64 16h DRAM Cfg" rev 0x00 >> km0 at pci0 dev 24 function 3 "AMD AMD64 16h Misc Cfg" rev 0x00 >> pchb5 at pci0 dev 24 function 4 "AMD AMD64 16h CPU Power" rev 0x00 >> pchb6 at pci0 dev 24 function 5 vendor "AMD", unknown product 0x1535 rev >> 0x00 >> usb3 at ohci0: USB revision 1.0 >> uhub3 at usb3 configuration 1 interface 0 "AMD OHCI root hub" rev >> 1.00/1.00 addr 1 >> usb4 at ohci1: USB revision 1.0 >> uhub4 at usb4 configuration 1 interface 0 "AMD OHCI root hub" rev >> 1.00/1.00 addr 1 >> isa0 at pcib0 >> isadma0 at isa0 >> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo >> pckbc0 at isa0 port 0x60/5 irq 1 irq 12 >> pcppi0 at isa0 port 0x61 >> spkr0 at pcppi0 >> vmm0 at mainbus0: SVM/RVI >> sdmmc0: can't enable card >> axen0 at uhub0 port 1 configuration 1 interface 0 "ASIX Elec. Corp. >> AX88179" rev 3.00/1.00 addr 2 >> axen0: AX88179, address xx:xx:xx:xx:xx:xx >> rgephy0 at axen0 phy 3: RTL8169S/8110S/8211 PHY, rev. 5 >> uhidev0 at uhub3 port 1 configuration 1 interface 0 "Dell Dell Smart >> Card Reader Keyboard" rev 2.00/1.00 addr 2 >> uhidev0: iclass 3/1 >> ukbd0 at uhidev0: 8 variable keys, 6 key codes >> wskbd0 at ukbd0: console keyboard, using wsdisplay0 >> ugen0 at uhub3 port 1 configuration 1 "Dell Dell Smart Card Reader >> Keyboard" rev 2.00/1.00 addr 2 >> vscsi0 at root >> scsibus2 at vscsi0: 256 targets >> softraid0 at root >> scsibus3 at softraid0: 256 targets >> softraid0: sd1 was not shutdown properly >> sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed >> sd1: 476937MB, 512 bytes/sector, 976767473 sectors >> root on sd1a (9990ff6713f15d12.a) swap on sd1b dump on sd1b >> WARNING: / was not properly unmounted >> >> ----------------------------------------- >> >> OpenBSD 6.2 (GENERIC.MP) #1: Thu Jan 18 11:09:28 UTC 2018 >> r...@machine.net:/usr/src/sys/arch/amd64/compile/GENERIC.MP >> real mem = 8451125248 (8059MB) >> avail mem = 8192278528 (7812MB) >> mpath0 at root >> scsibus0 at mpath0: 256 targets >> mainbus0 at root >> bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xdae9c000 (64 entries) >> bios0: vendor LENOVO version "8DET72WW (1.42 )" date 02/18/2016 >> bios0: LENOVO 5491C51 >> acpi0 at bios0: rev 2 >> acpi0: sleep states S0 S3 S4 S5 >> acpi0: tables DSDT FACP SLIC SSDT SSDT SSDT HPET APIC MCFG ECDT ASF! >> TCPA SSDT SSDT DMAR UEFI UEFI UEFI >> acpi0: wakeup devices LID_(S3) SLPB(S3) IGBE(S4) EXP4(S4) EXP7(S4) >> EHC1(S3) EHC2(S3) HDEF(S4) >> acpitimer0 at acpi0: 3579545 Hz, 24 bits >> acpihpet0 at acpi0: 14318179 Hz >> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat >> cpu0 at mainbus0: apid 0 (boot processor) >> cpu0: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz, 2791.33 MHz >> cpu0: >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI >> \ >> ,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3 >> \ >> ,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT >> >> cpu0: 256KB 64b/line 8-way L2 cache >> cpu0: TSC frequency 2791332320 Hz >> cpu0: smt 0, core 0, package 0 >> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges >> cpu0: apic clock running at 99MHz >> cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE >> cpu1 at mainbus0: apid 1 (application processor) >> cpu1: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz, 2790.93 MHz >> cpu1: >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI >> \ >> ,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3 >> \ >> ,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT >> >> cpu1: 256KB 64b/line 8-way L2 cache >> cpu1: smt 1, core 0, package 0 >> cpu2 at mainbus0: apid 2 (application processor) >> cpu2: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz, 2790.93 MHz >> cpu2: >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI >> \ >> ,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3 >> \ >> ,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT >> >> cpu2: 256KB 64b/line 8-way L2 cache >> cpu2: smt 0, core 1, package 0 >> cpu3 at mainbus0: apid 3 (application processor) >> cpu3: Intel(R) Core(TM) i7-2640M CPU @ 2.80GHz, 2790.93 MHz >> cpu3: >> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI >> \ >> ,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3 >> \ >> ,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,SENSOR,ARAT >> >> cpu3: 256KB 64b/line 8-way L2 cache >> cpu3: smt 1, core 1, package 0 >> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins >> acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63 >> acpiec0 at acpi0 >> acpiprt0 at acpi0: bus 0 (PCI0) >> acpiprt1 at acpi0: bus -1 (PEG_) >> acpiprt2 at acpi0: bus 2 (EXP1) >> acpiprt3 at acpi0: bus 3 (EXP2) >> acpiprt4 at acpi0: bus 5 (EXP4) >> acpiprt5 at acpi0: bus 13 (EXP5) >> acpiprt6 at acpi0: bus 14 (EXP7) >> acpicpu0 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS >> acpicpu1 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS >> acpicpu2 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS >> acpicpu3 at acpi0: C3(350@104 io@0x415), C1(1000@1 halt), PSS >> acpipwrres0 at acpi0: PUBS, resource for EHC1, EHC2 >> acpitz0 at acpi0: critical temperature is 99 degC >> acpibtn0 at acpi0: LID_ >> acpibtn1 at acpi0: SLPB >> "LEN0020" at acpi0 not configured >> acpibat0 at acpi0: BAT0 model "45N1172" serial 14231 type LION oem "SANYO" >> acpiac0 at acpi0: AC unit online >> acpithinkpad0 at acpi0 >> "IBM0079" at acpi0 not configured >> "PNP0C14" at acpi0 not configured >> "PNP0C14" at acpi0 not configured >> acpidock0 at acpi0: GDCK docked (15) >> acpivideo0 at acpi0: VID_ >> acpivout at acpivideo0 not configured >> acpivideo1 at acpi0: VID_ >> cpu0: Enhanced SpeedStep 2791 MHz: speeds: 2801, 2800, 2600, 2400, 2200, >> 2000, 1800, 1600, 1400, 1200, 1000, 800 MHz >> pci0 at mainbus0 bus 0 >> pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09 >> inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 3000" rev 0x09 >> drm0 at inteldrm0 >> inteldrm0: msi >> inteldrm0: 1366x768, 32bpp >> wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) >> wsdisplay0: screen 1-5 added (std, vt100 emulation) >> "Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured >> em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address >> f0:de:f1:d1:9d:19 >> ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 16 >> usb0 at ehci0: USB revision 2.0 >> uhub0 at usb0 configuration 1 interface 0 "Intel EHCI root hub" rev >> 2.00/1.00 addr 1 >> azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x04: msi >> azalia0: codecs: Conexant CX20590, Intel/0x2805, using Conexant CX20590 >> audio0 at azalia0 >> ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: msi >> pci1 at ppb0 bus 2 >> ppb1 at pci0 dev 28 function 1 "Intel 6 Series PCIE" rev 0xb4: msi >> pci2 at ppb1 bus 3 >> athn0 at pci2 dev 0 function 0 "Atheros AR9281" rev 0x01: apic 2 int 17 >> athn0: AR9280 rev 2 (2T2R), ROM rev 22, address 70:f1:a1:7f:ca:63 >> ppb2 at pci0 dev 28 function 3 "Intel 6 Series PCIE" rev 0xb4: msi >> pci3 at ppb2 bus 5 >> ppb3 at pci0 dev 28 function 4 "Intel 6 Series PCIE" rev 0xb4: msi >> pci4 at ppb3 bus 13 >> sdhc0 at pci4 dev 0 function 0 "Ricoh 5U822 SD/MMC" rev 0x07: apic 2 int 16 >> sdhc0: SDHC 3.0, 50 MHz base clock >> sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma >> ppb4 at pci0 dev 28 function 6 "Intel 6 Series PCIE" rev 0xb4: msi >> pci5 at ppb4 bus 14 >> xhci0 at pci5 dev 0 function 0 "NEC xHCI" rev 0x04: msi >> usb1 at xhci0: USB revision 3.0 >> uhub1 at usb1 configuration 1 interface 0 "NEC xHCI root hub" rev >> 3.00/1.00 addr 1 >> ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 23 >> usb2 at ehci1: USB revision 2.0 >> uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev >> 2.00/1.00 addr 1 >> pcib0 at pci0 dev 31 function 0 "Intel QM67 LPC" rev 0x04 >> ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x04: msi, >> AHCI 1.3 >> ahci0: port 0: 6.0Gb/s >> scsibus1 at ahci0: 32 targets >> sd0 at scsibus1 targ 0 lun 0: <ATA, ST750LX003, 0002> SCSI3 0/direct fixed >> sd0: 698940MB, 512 bytes/sector, 1356773168 sectors >> ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x04: apic >> 2 int 18 >> iic0 at ichiic0 >> spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 SO-DIMM >> spdmem1 at iic0 addr 0x51: 4GB DDR3 SDRAM PC3-10600 SO-DIMM >> isa0 at pcib0 >> isadma0 at isa0 >> pckbc0 at isa0 port 0x60/5 irq 1 irq 12 >> pckbd0 at pckbc0 (kbd slot) >> wskbd0 at pckbd0: console keyboard, using wsdisplay0 >> pms0 at pckbc0 (aux slot) >> wsmouse0 at pms0 mux 0 >> wsmouse1 at pms0 mux 0 >> pms0: Synaptics clickpad, firmware 8.1, 0x1e2b1 0x940300 >> pcppi0 at isa0 port 0x61 >> spkr0 at pcppi0 >> aps0 at isa0 port 0x1600/31 >> vmm0 at mainbus0: VMX/EPT >> uhub3 at uhub0 port 1 configuration 1 interface 0 "Intel Rate Matching >> Hub" rev 2.00/0.00 addr 2 >> uhub4 at uhub3 port 1 configuration 1 interface 0 "Standard >> Microsystems" rev 2.00/0.00 addr 3 >> run0 at uhub4 port 2 configuration 1 interface 0 "Ralink 3070" rev >> 2.00/1.01 addr 4 >> run0: MAC/BBP RT3070 (rev 0x0201), RF RT3020 (MIMO 1T1R), address >> xx:xx:xx:xx:xx:xx >> uhub5 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching >> Hub" rev 2.00/0.00 addr 2 >> ugen0 at uhub5 port 6 "OMNIKEY" rev 2.00/2.03 addr 3 >> vscsi0 at root >> scsibus2 at vscsi0: 256 targets >> softraid0 at root >> scsibus3 at softraid0: 256 targets >> softraid0: sd1 was not shutdown properly >> sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed >> >> ---------------------- >> >> Stefan, I can't test 6.3 on the machine which has 6.2 currently >> installed. Will do it a bit later (hope next week). >> >> Thank you for attention to the problem present. >> >> On 4/5/2018 6:09 PM, Stefan Sperling wrote: >>> On Thu, Apr 05, 2018 at 05:30:25PM +0300, Denis wrote: >>>> 1. AR9271 USB stick has been connected to OpenBSD 6.3 amd64 >>>> 2. # fw_update >>>> 3. # ls /etc/firmware | grep athn >>>> athn-ar7010 >>>> athn-ar7010-11 >>>> athn-ar9271 >>>> athn-license >>>> athn-open-ar7010 >>>> athn-open-ar9271 >>>> athn-open-license >>>> >>>> After reconnecting AR9271 >>>> athn0: could not load firmware >>> >>> I don't know why the firmware doesn't load for you. >>> It all works fine for me, with both AR9271 devices and AR7010 devices. >>> >>> There is a known issue which looks like this device does not power up >>> properly on some machines, and in some configurations, for example >>> when it is plugged behind a USB 2.0 hub. >>> This results in a failure to load the firmware but it the underlying >>> issue is a different problem which nobody has figured out yet. >>> It could be a bug in our USB stack. >>> >>> However, this is inconsistent with your observation that it worked >>> in 6.2. It sounds like nothing else changed? >>> >>>> When I remove athn-open-* firmware files from /etc/firmware >>>> athn0: failed loadfirmware of file athn-open-ar9271 (error 2) >>>> athn0: could not load firmware >>>> >>>> In OpenBSD 6.2 amd64 /etc/firmware contains only athn-ar7010, >>>> athn-ar7010-11, and ar9271. The USB stick works with it. >>> >>> Is this 6.2 install on the same machine, or on a different machine? >>> If it's a different machine, could you try 6.3 on the same machine >>> where you tested 6.2? >>> >>>> I think it could be working again if I load non athn-open-* versions of >>>> firmware provided. >>>> >>>> My question is how to load non open version (athn-ar9271) of the athn >>>> firmware to have AR9271 working? >>> >>> You cannot. >>> The driver in 6.3 does not support the old closed source firmware >>> anymore. It only supports the open firmware. >>> >>> It's unfortunate that this change broke it for you, but I cannot >>> explain why. When this change was made about 2 months ago I did >>> not get any negative reports. >>> See https://marc.info/?l=openbsd-tech&m=151769894925027&w=2 >>> >>>> athn0: failed error message has a typo 'loadfirmware' without a space. >>> >>> That's intentional. It refers to the function loadfirmware(9): >>> http://man.openbsd.org/loadfirmware >>> >> >