On Wed, 24 Oct 2018 15:13:36 +0100 Stuart Henderson <s...@spacehopper.org> wrote:
> On 2018/10/24 16:09, Karel Gardas wrote: > > On Wed, Oct 24, 2018 at 4:06 PM Karel Gardas <gard...@gmail.com> wrote: > > > > > > On Wed, Oct 24, 2018 at 3:00 PM Jonathan Gray <j...@jsg.id.au> wrote: > > > > You can create /etc/X11/xorg.conf with > > > > > > > > Section "Device" > > > > Identifier "intel device" > > > > Driver "intel" > > > > EndSection > > > > > > This works nicely and I'm again in X window System although it now > > > behaves a bit differently with second display attached to display > > > port. Previously I've had two independent screens. Now screen is kind > > > of mirrored so on laptop builtin I'm not able to see whole screen > > > since attach display is 2560x1600 display and laptop is 13xx x > > > something. > > > > xrandr --output LVDS1 --below DP1 -- was able to switch off mirroring > > and provide me with 2 independent screens again. > > > > By this I've also notice change in the output names. Previously they > > were LVDS-1 and DP-1 now they are LVDS1 and DP1 > > The name change is an expected difference between the intel and modesetting > drivers. But I'm using intel driver now, thanks to Jonathan advice! So it's proably more general usage name than just in modesetting driver.